• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FS2004 DSDG "City Center" Las Vegas

Andrea80

Andrea80

Messages
163
Country
italy
Hi all!

I will take a break from the VFR airfield scenery I'm working on.

So I will continue on the developing of Las Vegas recent projects, this will be my third "mini" scenery after "Wynn & Encore" and "Trump & Palazzo".

Here some screenshots from Gmax, currently, Vdara, Mandarin Oriental and both Cosmopolitan towers are done.

Fullscreencapture124201393246PMbmp_zps825f5b0c.jpg


Fullscreencapture124201393226PMbmp_zps32bc9b9a.jpg


Fullscreencapture124201393207PMbmp_zps23b816e2.jpg


See you at next update ;) hope you like it :cool:
 
All tall building are modeled now, Vdara, Veer and Mandarin Oriental is already textured, now I will proceed with remaining tall buildings, then I will try to model the shopping mall Crystals, will be a challenge :eek:

Here a couple of screens from inside Fs2004:

fs92013-01-2715-24-50-35bmp_zps5baa7c3c.jpg


fs92013-01-2715-23-36-14bmp_zpsb48c6e82.jpg


fs92013-01-2715-22-36-75bmp_zps79108b3c.jpg


fs92013-01-2715-22-22-04bmp_zps3ffcbecc.jpg


fs92013-01-2715-22-07-42bmp_zpsf8df651d.jpg


Cheers ;)

Andrea
 
Building in the foreground, is at one hectic angle... would be interesting trying to stand upright in that building or get to the top floor.... :)
 
FsX version is not priority at the moment, I've never developed for that sim because I do not have it :(, but I will try to convert the scenery as soon as I will have FsX on my pc.

Update: shortened "The Harmon" because I erroneously used the project height, the building has been shortened for structural problems.

Harmonbmp_zpsee5565e2.jpg


Cheers, Andrea :D
 
Welcome Crystals at Las Vegas :D

The model seem a little messy, but it is really really close to the real one!! hope to let you see textured soon!

Fullscreencapture131201394656PMbmp_zps0b33b5c4.jpg


Fullscreencapture131201394722PMbmp_zps0300f7e7.jpg


Fullscreencapture131201394820PMbmp_zpsd6c7e688.jpg


Added also Panorama Towers I & II and "The Martin"

Fullscreencapture131201395122PMbmp_zps84cbb451.jpg


Cheers, Andrea :cool:
 
Sweet I will try to place them into my FSX when setup once you are done with the FS9 version to see how it ports over. Any chance you can make each building seperate so I can move them around if nessary?

Thanks
Sean
 
Great work love the Vegas Enhancements any chance you will do Fountain blue, and WestGate @ Planet Hollywood?
 
01pewterz28 said:
Great work love the Vegas Enhancements any chance you will do Fountain blue, and WestGate @ Planet Hollywood?
Click to expand...

Yes :) also Marriott's Chateau, and Turnberry towers. :)

and about your previous question, not a problem to do separate files.
 
Hi,
Other 3 hotels are now completed! Ph Westgate is very detailed, and one of the most difficult to model... Marriott's Grand Chateau has been already textured and the last one is Polo Towers, just a filler because is not very tall but it is located between City Center and Marriott.

Now I will proceed with:

The Hotel (Mandalay)
Sky condos
Turnberry Place
Turnberry Towers
Fontainebleu

I will have to evaluate about the Palms because there are not to much photos, I will see when I finish all the above.

Enjoy with some screens about Marriott and Westgate ;)

Cheers, Andrea
 

Attachments

  • fs9 2013-02-06 22-40-39-60.jpg
    fs9 2013-02-06 22-40-39-60.jpg
    157.2 KB · Views: 874
  • fs9 2013-02-06 22-40-57-83.jpg
    fs9 2013-02-06 22-40-57-83.jpg
    135.9 KB · Views: 787
  • fs9 2013-02-06 22-42-26-71.jpg
    fs9 2013-02-06 22-42-26-71.jpg
    198 KB · Views: 812
  • fs9 2013-02-06 22-43-50-38.jpg
    fs9 2013-02-06 22-43-50-38.jpg
    178.6 KB · Views: 708
  • fs9 2013-02-06 22-44-01-16.jpg
    fs9 2013-02-06 22-44-01-16.jpg
    142.5 KB · Views: 812
  • fs9 2013-02-06 22-44-17-19.jpg
    fs9 2013-02-06 22-44-17-19.jpg
    144.9 KB · Views: 675
  • fs9 2013-02-06 22-44-48-65.jpg
    fs9 2013-02-06 22-44-48-65.jpg
    240.7 KB · Views: 990
Andrea80 said:
Hi,
Other 3 hotels are now completed! Ph Westgate is very detailed, and one of the most difficult to model... Marriott's Grand Chateau has been already textured and the last one is Polo Towers, just a filler because is not very tall but it is located between City Center and Marriott.

Now I will proceed with:

The Hotel (Mandalay)
Sky condos
Turnberry Place
Turnberry Towers
Fontainebleu

I will have to evaluate about the Palms because there are not to much photos, I will see when I finish all the above.

Enjoy with some screens about Marriott and Westgate ;)

Cheers, Andrea
Click to expand...

Excellent work any chance you could offer each hotel as a seperate bgl file so we can add ones we want plus I would like to try and import these into FSX and see if I can get them to work and it's much easier if each are a seperate bgl file.

Keep up the fantastic work
Sean
 
Little update:

Added Bellagio SPA behind Cosmopolitan, and started with the northern part of the Strip, with Sky Condos:

fs92013-02-1007-56-49-22_zps1947fe6d.jpg


fs92013-02-1007-56-28-50_zps77450de7.jpg


fs92013-02-1222-22-07-50_zps69ad6abf.jpg


fs92013-02-1222-23-03-55_zpscdb6a537.jpg


Cheers
 
01pewterz28 said:
Excellent work any chance you could offer each hotel as a seperate bgl file so we can add ones we want plus I would like to try and import these into FSX and see if I can get them to work and it's much easier if each are a seperate bgl file.
Sean
Click to expand...

Yep ;)

not a problem to do separate files.
 
Andrea,

Amazing work as always. So glad someone is keeping up with FS9. Even though I just made major upgrades to my system for P3D which gets an average of 25-45 FPS with light prop aircraft, there is little piece of mind with it.

With FS9, no matter what I throw at it, it just keeps going. No CTD's, no such thing as micro stutters or OOM's. So needless to say, I am so glad we are finally getting a proper and updated rendition of the Strip in FS9.

Please feel free to keep going and do the entire Strip! :D
 
Last edited:
Update!
North side of the Strip is now completed :D the look of the Strip is really changed! Here a couple of screenshots:

Turnberry Towers and Hilton Grand Vacation Club:
fs92013-02-1617-45-28-29_zps5bd13039.jpg


The four Turnberry Place towers and Fontainbleau in the background:
fs92013-02-1617-45-43-30_zps7ca7fa8c.jpg


Fontainbleau, Las Vegas current tallest:
fs92013-02-1617-47-03-31_zps887389a9.jpg


fs92013-02-1617-47-18-33_zps996b62c0.jpg


View along the entire Strip, I can say that 50% of the buildings are modeled by me :p
fs92013-02-1617-47-48-10_zps97209700.jpg


Hope you like!
 
You must log in or register to reply here.
Back
Top