• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Search results

  1. O

    What software do you use to edit and create your own endless textures?

    sorry for the late reply, somehow I overslept it, haven't been busy with it for a long time. I'm happy to upload the file. the area is a huge parking lot
  2. O

    What software do you use to edit and create your own endless textures?

    Thanks for the answer, but that doesn't help me. My problem is different, see video: The question is whether the method or another in Blender (also with an addon) is MSFS compatible? I'm changing the texture node with it. (I googled this, but in German and got absolutely no results until I...
  3. O

    What software do you use to edit and create your own endless textures?

    What software do you use to edit and create your own endless textures? I have a photo that I tried to adapt using paint.net or Gimp. I used the endless edge filter with Gimp, but in materialize it looks like this: the dark points (marked in red) are not visible in the raw material, I only...
  4. O

    Blender place all points along the vertex at the same height, how to do it correctly so that all are taken over?

    The lines are followed on the other side by a balcony connected to the wall. If not everything is straight, the geometry is not clean and the connecting surfaces are "twisted" horizontally
  5. O

    Blender place all points along the vertex at the same height, how to do it correctly so that all are taken over?

    First of all, I have to apologize that I didn't answer. I had absolutely no time for Blender the last few days Now I've tried it and it's so easy and exactly what I was looking for. 1 million thanks for that, I don't even know how to express my thanks. You really help in every situation and...
  6. O

    Blender place all points along the vertex at the same height, how to do it correctly so that all are taken over?

    no, unfortunately not I would like to have all points on the line green at the same Z height. Now each point has a different height, even if it is not visible. One point has 2 meters, the next 2.005 meters, then 2.01m..... if I click on the first point of the line and then Ctrl+ the last one...
  7. O

    Blender place all points along the vertex at the same height, how to do it correctly so that all are taken over?

    Hi all, I've searched a lot but haven't found an answer. I want to place all points (or just several selected points) along a line (vertex) at the same height in Blender. The problem: All points have a different height, if I select several points and enter a height on the Z axis, some points...
  8. O

    MSFS MSFS Asobo Official Blender exporter

    Object with Asobo MSFS standard material textures, then some faces were not displayed. The problem was misaligned normals, quite simple, I just didn't immediately think of it
  9. O

    MSFS MSFS Asobo Official Blender exporter

    Very good news @mamu and @ronh the finished installation of mamu works. the export takes place. Thanks a lot for this. Can I make a small PayPal donation to both of you for your trouble? Without you, especially Mamu, I would not have found a solution. Whatever the reason, something didn't work...
  10. O

    MSFS MSFS Asobo Official Blender exporter

    Hello @ronh , the screenshot was the first one with the downloaded 1.3.1 where the zip file was wrong and Asobo corrected it. Version 1.3.1 is now installed and is also displayed as such. The error message is the same. On the one hand I will try your procedure again, but you had already...
  11. O

    MSFS MSFS Asobo Official Blender exporter

    That's it, that's all clear to me. I know how to install an addon in Blender. Other addons I use work flawlessly. The problem is simply that Blender can't find the "bpy.ops.export_scene.gltf" according to the error message. I read in another thread that the error also occurs in Blender's own...
  12. O

    MSFS MSFS Asobo Official Blender exporter

    I just tested the whole thing on another PC where Blender was never installed. Blender 3.3 in the automatic installation in the default directory. Exporter ZIP file loaded, copied to the addon folder and the same error when exporting. Now I have to find out which file it is exactly that he says...
  13. O

    MSFS MSFS Asobo Official Blender exporter

    Use the Desktop Mode on your mobile device, then you see the.zip https://github.com/AsoboStudio/glTF-Blender-IO-MSFS/releases/tag/v1.3.1
  14. O

    MSFS MSFS Asobo Official Blender exporter

    So now I understand what it's all about. I did the installation exactly according to the video instructions (source code download, io_scene*** folder copy in Blender/3.3/Script/Addons) and it's the same problem, but now version 1.3.1 is displayed correctly in Blender. There is an update on...
  15. O

    MSFS MSFS Asobo Official Blender exporter

    @rhumbaflappy So it's because of what @Pyscen wrote? The addon in Blender is not installed correctly? @Pyscen I don't quite understand that, it may be because I know very little English and translated it. Maybe it's because of the translation. I can only install the addon in blender as a...
  16. O

    MSFS MSFS Asobo Official Blender exporter

    Update: It doesn't work with the other Blender version either. Default GtlF is disabled in Blender. The Asobo Exporter also shows version 1.3.0 when downloading version 1.3.1. Removing and reinstalling does not change anything. The manual on Github is very limited (there is no manual in the...
  17. O

    MSFS MSFS Asobo Official Blender exporter

    Thanks for the great support, I'll check tomorrow morning (German time)
  18. O

    MSFS MSFS Asobo Official Blender exporter

    First of all, thanks for the answer. With a cube and version 1.3.1 the same problem. Is there a complete documentation/manual for the exporter? The fault will be mine because I'm probably doing something wrong
  19. O

    MSFS MSFS Asobo Official Blender exporter

    Hello everyone, my first project started in Blender 2.8, now Blender 3.3 and Asobo Exporter current version 1.3. The following error occurs with an untextured object only with Blender standard material assignment. I used to use the old exporter that wasn't from Asobo I got gtlf and got files...
  20. O

    Blender How can I model the following orange roof (thin tarpaulin/awning-like) in Blender?

    First of all, sorry that my answer took so long, the week was a bit stressful and I always need peace and quiet to answer. With everything, I took a tarp and tried everything: different face cuts, then tried cylinders or even both etc. I struggle with the form because it is a kind of stretched...
Back
Top