P3D v6 Airport Design Editor 179 Test Error

[Robert Armstrong]

This the problem I am having with BluePrint Simulations KSFO and no other airport scenery. Not sure if anyone can help or if they know of a solution but any advice will help.

Compiler Errors Found. These were not identified by the Issue Manager. Please let us know
what the compiler error is so that we can improve the Issue Manager.

The compiler message is shown below

ScruffyDuck Scenery Design Engine Compiling
Using BglComp....


Parsing document: C:\MSFS\FS Design Tools\Airport Design Editor 179 Test\!AdeTempWorkOnly\KSFO_ADEX_RPA.xml

INTERNAL COMPILER ERROR: #C2593:
**** DUPLICATE VOR/ILS ****
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = California
ERROR: city = San Francisco
ERROR: name = San Francisco Intl
ERROR: lat = 37.6189721748233
ERROR: lon = -122.374888658524
ERROR: alt = 12.992F
ERROR: magvar = -14.2999877929688
ERROR: trafficScalar = 1
ERROR: airportTestRadius = 16404.2F
ERROR: ident = KSFO
ERROR: >
ERROR: <Runway
ERROR: lat = 37.6211343705654
ERROR: lon = -122.375261932611
ERROR: alt = 12.992F
ERROR: surface = ASPHALT
ERROR: heading = 117.870002746582
ERROR: length = 11870.01F
ERROR: width = 200.0F
ERROR: number = 10
ERROR: designator = LEFT
ERROR: patternAltitude = 1000.0F
ERROR: primaryTakeoff = YES
ERROR: primaryLanding = YES
ERROR: primaryPattern = LEFT
ERROR: secondaryTakeoff = YES
ERROR: secondaryLanding = YES
ERROR: secondaryPattern = RIGHT
ERROR: >
ERROR: <Ils
ERROR: lat = 37.6212922856212
ERROR: lon = -122.368381172419
ERROR: alt = 12.992F
ERROR: heading = 294.869995117188
ERROR: frequency = 110.750
ERROR: end = SECONDARY
ERROR: range = 27.01N
ERROR: magvar = -14.2999877929688
ERROR: ident = IFNP
ERROR: width = 5.19000005722046
ERROR: name = ILS/DME 28R
ERROR: backCourse = TRUE
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2024: Failed to process closing element tag <Ils> near line 201!
INTERNAL COMPILER ERROR: #C2607: Compilation errors detected, compilation failed!


Parse complete!

It seems to be just the one runway (I'm guessing}.

 

[tgibson]

Apparently, your airport has two ILS’s with the designation INFP? You need to delete one, or at least change its designation.

 

[Robert Armstrong]

For whatever reason there are 3 separate ILS's for runway 28R and they are all stock

 

[tgibson]

All with the INFP designation? Perhaps to prevent recompiling the airport. You should be able to select one and press the delete key to remove it? ADE will ask if you want to orphan the ILS, say yes. Then do that with the second one, leaving only one active. If the green arrows are coincident move them away first or use the List menu to select them.

 

[Robert Armstrong]

I cannot get the delete key to highlight so that i can delete either one of the ILS links.

 

[Robert Armstrong]

Even after I have orphaned them, I still cannot get the airport to compile. And now I have this showing up.