Apron Lights in P3D V3.0

[Frits]

Hallo all,i am porting my fsx scenery over to p3d,i have just this problem with my fx that flikker on the apron see pic.Need some help.

Here is my fx.

[Library Effect]
Lifetime=5
Version=2.00
Display Name=Lichtkegel - (c) Flyways2005
Radius=250
Priority=0


[Properties]
Cockpit=1
VirtualCockpit=1
Spot=1
Tower=1
Map=1

[Emitter.0]
Lifetime=0.50, 0.50
Delay=0.00, 0.00
Bounce=0.00
Rate=1.00, 1.00
X Emitter Velocity=0.00, 0.00
Y Emitter Velocity=0.00, 0.00
Z Emitter Velocity=0.00, 0.00
Drag=0.00, 0.00
X Particle Velocity=0.00, 0.00
Y Particle Velocity=0.00, 0.00
Z Particle Velocity=0.00, 0.00
X Rotation=0.00, 0.00
Y Rotation=0.00, 0.00
Z Rotation=0.00, 0.00
X Offset=0.00, 0.00
Y Offset=0.00, 0.00
Z Offset=0.00, 0.00
Pitch=0.00, 0.00
Bank=0.00, 0.00
Heading=0.00, 0.00

[Particle.0]
Lifetime=0.00, 0.00
Type=19
X Scale=60.00, 60.00
Y Scale=60.00, 60.00
Z Scale=00.00, 00.00
X Scale Rate=0.00, 0.00
Y Scale Rate=0.00, 0.00
Z Scale Rate=0.00, 0.00
Drag=0.00, 0.00
Color Rate=0.00, 0.00
X Offset=0.00, 0.00
Y Offset=0.00, 0.00
Z Offset=0.00, 0.00
Fade In=0.00, 0.00
Fade Out=0.00, 0.00
Rotation=0.00, 0.00
Ground Normal=1
Static=1
Face=0, 0, 0

[ParticleAttributes.0]
Blend Mode=2
Texture=TR2.bmp
Bounce=0.00
Color Start=200, 200, 200, 50
Color End=200, 200, 200, 50
Jitter Distance=0.00
Jitter Time=0.00
TempK=100.00
TempRate=0.00
uv1=0.00, 0.50
uv2=0.50, 1.00
X Scale Goal=0.5
Y Scale Goal=0.5
Z Scale Goal=0.5
Extrude Length=0.00
Extrude Pitch Max=0.00
Extrude Heading Max=0.00

Thanks
Frits
http://triengtrieng.webs.com/

 

[Azurafiles]

I guess you will have to adjust the height of the ground lights a little.
Had some issue in p3dv3 and adjusted the height a little and problem was solved.