• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Attach point lights moving around?

Messages
18
Country
unitedstates
Been stumped by this problem for a while now. I'm bringing an FS9 model into FSX, and am stuck on adding lights to the model. I have a single poly geometry, with the pivot point where I want the point light to go, and used the attach point tool to add the light effect and visibility controls to the poly. But, when I export and look at it, the light is drawn offset! Even more mind-blowingly, the light point moves around too, depending on which way I'm looking at the aircraft. When I look at it from directly overhead, it appears in the right spot, but if I lower the angle it shifts off to one side, and if I pan around it moves!

(Left shows the pivot point in Gmax, right shows what it looks like in the sim from a similar angle)
lighteffectproblems.jpg


All of the lights I've placed on this model in this way do this. I'm sure I'm missing something really dumb, but I can't for the life of me figure it out. Any ideas?

Thanks in advance for your help.

Nick
 
Hi, rembember I had the same problem (or very simular)

The light effects shifted position as I moved around the aircraft.

The solution was to reset X-form on "most" parts.

It was not the poly itself that made the error, but another one.
So try to select all parts and reset the x-form then do a export and have a look.

Its worth a try and just hope it does not screw up any advanced parts...
 
No dice, unfortunately. :(

I even tried deleting everything except the light poly, the light lens, and the fuselage, and resetting xform on all those parts (since doing it on the complete aircraft basically destroyed it - engines sticking out of the fuselage perpendicular and all that...), and the beacon still moves around and isn't in the right place unless I'm dead overhead.
 
I've noticed this myself and I think it might actually be the effect, if you examine most of the default lights with the effect tool there's a bit of an offset for some of the emitters. I think it could be solved by rewriting the effect but I haven't got round to trying.
 
Thanks for the reply. Unfortunately I also noticed that, and tried both re-editing the default light effects, making a copy of them and editing those, and using some custom light effects, and it still didn't help.

Edit: I didn't think to check this before, but I tried out a couple other aircraft (a default one and a third-party one), and they do the same thing. So I guess this is just another FSX bug... :(

So, anyone know any good material recipes for a modeled, three-crossed-plane "light"?
 
Last edited:
Hi
Another work around if your attached lights are fixed is to use a mixture of attached lights(which throw a beam on ground objects but move around) and aircraft.cfg effects lights (which dont light up ground objects but stay put) is to use a bit of hidden code to hide the attached lights when off the ground...
Code:
 <PartInfo>
	<Name>NavLightsOffGrnd</Name>
	<Visibility>
	    <Parameter>
	<Code>
	     (A:Radio Height,feet) 50 &lt; if{ 1 } els{ 0 }
	</Code>
	    </Parameter>
	</Visibility>
   </PartInfo>
if the lights are attached to moving parts then it gets complicated :)
 
Back
Top