• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Damper animation?

Horst18519

Moderator
Resource contributor
Messages
2,385
Country
germany
Maybe I'm blind once again, but I cannot find the animation tag for gear dampers. How do you do dampers?

EDIT: And another tag I cannot solve: The center wheel steering. I tried "c_wheel" but it seems this animation only knows 100% left or 100% right. It kind of works if I steer left and right, but not smoothly and with no middle position. It jumps from left to right and back.
 
Last edited:
Figured it out all by myself. :D

The trick is to use an animation with lenght 200. 0-100 ist for gear extension, 100-200 is for damping. Cool. :)

The other issue is just the same: c_wheel does not work from 0 to 100 but to 200 with mid position being 100.
 
One more anwer (or better: question) from my side.

c_wheel doesn't seem to work properly.

Can it be that I have to define somewhere if it is a front center wheel or a tail wheel?

In the sample the DC3 uses c_wheel for it's 360° tail wheel. This cannot be the same animation as for a C172 front wheel, can it?

Maybe the cessna uses 0-100 and the DC3 from 100-200? No, that can't be the case...

I know there are a lot of developers out there who know exactly how it's done. So please... :D ;)
 
This thread seems to be rather onesided...

Is it really such a precious secret how to animate the center wheel? :(
 
C_wheel Angle

Hi,

I hope that i dont came to late, but when I remember I see

that the steering angle was definded in aircraft.cfg, subcategory

CONTACT POINTS.

Greetings
 
Oh, sorry, forgot about this thread.

Yes, thanks, Felix, I found a solution for my issue. :)

Still some trouble, but nothing that can't be solved by the experts at FFDS. :D
 
Hi there,

I have the same problem as Horst and hope to find an answer...

First of all, I'm using Gmax, FSX and the latest SDK.

My problem is:
The gear retracts as it should but the damper doesnt work. The contact points are ok - when the plane stands on the ground in the FSX, it goes down a little bit, buuuut the animation doesnt show up.

The keyframes 0, 101 and 200 are set for the bottom part of the damper, and 101 and 200 are used for the animation.


Furthermore, I have a question about the steering animation. Which animation has to be attached and which keframes should be used? It cant be the c_gear animation, because the keyframes 0 to 200 are used for retracting and damping, or am I wrong?



I suggest to make a list about the animations and the related keyframes.

I can start with:
purpose: retracting center gear attached FS Animation: c_gear keyframes: 0-100
purpose: retracting left gear attached FS Animation: l_gear keyframes: 0-100
purpose: retracting right gear attached FS Animation: r_gear keyframes: 0-100
purpose: damper center gear attached FS Animation: c_gear keyframes: 101-200
purpose: damper left gear attached FS Animation: l_gear keyframes: 101-200
purpose: damper right gear attached FS Animation: r_gear keyframes: 101-200




I hope you can help!

regards
Vitus
 
You're correct about gear and damper animation.

At key 100 the gear is extended 100% and damped 0%. At key 200 the damper is at full compression. But you don't tag it twice. You simply tag the whole animation 0-200 with ?_gear

For the steering you need the c_wheel-tag, as stated in the FFDS-thread:

Fixed Gear -

0 = blank position and rotation key set
100 = 0º
125 = 90º
150 = 180º
175 = 270º
200 = 360º

...

Retractable Gear -

0 = 0º
50 = 90º
100 = 180º
150 = 270º
200 = 360º
 
Hi Horst,

thanks for the answer.

About the damper: As far as I see, I'm doing right, but it still doesnt work?! ;)
Is it necessary to set keyframes for rotation, position and scaling, even if I just need the positioning key?

Second: Do I have to set the steering animation for the whole 360°, even if I just have a steering angle of 90°?

Third: I thought the ?_wheel animation is for the rotation of the wheel?

greetings
Vitus
 
One after the other:

For damper animation you only need position keys (unless the damper works with ratation also). You have to set 3 keys: 0, 100, 200 and tag it with "c_gear" or l/R gear.

For the steering: It is neccessary that you set exactly the keys described in the quote. FSX calculates itself what range of animation it renders, depending on the angles you set in the aircraft.txt.
 
once again, thanks for the answer. I will try it, once I am back home!

The third question is remaining: I thought the c_wheel animation is for the rotation animation of the tyre?
 
For tire animation you use anim_tyre if it's for the center wheel (no brakes) or l_wheel / r_wheel (or is it called l_wheel_blurred/still? not sure at the moment) for the tyres that are affected by l/r-brakes.

It's a bit confusing, but that's the way it works.
 
once again, thanks for the answer. I will try it, once I am back home!

The third question is remaining: I thought the c_wheel animation is for the rotation animation of the tyre?

No... c_wheel is strictly for nose/tail gear steering.

For tire rotation, use:

c_tire_still
c_tire_blurred

l_tire_still
l_tire_blurred

r_tire_still
r_tire_blurred

Please note that the "British spelling of 'tyre' is not supported!" :)
 
ok, thanks fo your response! It works fine by now.


Please note that the "British spelling of 'tyre' is not supported!"

Maybe I was a bit tyred ;)


Greetings (yipyipyip)

Vitus
 
ok, thanks fo your response! It works fine by now.

Maybe I was a bit tyred ;)

Greetings (yipyipyip)

Vitus

Well, actually in FSX one could create custom XML script to support the "tyre" spelling, but it seems a bit pointless... :stirthepo
 
Back
Top