• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Exclude default ILS beacons / lights

Messages
204
Country
us-texas
How do I hide the ILS beacons, I checked the runway properties but maybe I missed it...

I have DeleteAllILS = true and I tried an exclusion rectangle as well, still no go.
It's because I have the ILS set as secondary for the runway, so now it refuses to hide.

Any ideas?

Thanks in advance...
 
Last edited:
If I'm not mistaken, "ILS" uses instrumentation to establish a flight path, not visual cues. So I'm pretty sure the VASI lights aren't part of ILS. Regardless, they are both adjusted in runway Properties.

runway.jpg
 
I am not speaking of VASI lights, the Beacons themselves have lights on them.

My problem is deleting the beacon objects and its lights, and there is no property that I see.

I will look again, but I looked quite a few times...

Anyone know exactly where the setting is?
 
Last edited:
Thanks for your interest! Yes I have played MSFS. I take for granted the fact that ILS is only at large and metropolitan airports, it's pretty technical and specific for each individual airport and since I get confused easily, I tend to learn only what I need for each project and much of it is forgotten all too soon. Now that we are acquainted, I will go ahead and offer an observation.

From the perspective of creating projects, I can observe that ILS is specific for each runway and that one must place a localizer scenery object, to which one assigns coordinates and specifications that correspond to that scenery object. Removing the specifications, will not remove the object.
 
The objects that it draws are removable somehow, pretty sure, there are tons of custom sceneries with custom beacons.

Again, I have already been deep into the ILS settings and tested my ILS and it works fine.
The problem is checking the box "ILS" and creating my own custom ILS causes MSFS to draw the beacons.
If I uncheck it, then there is no method I am aware of to have an ILS with that box unchecked.

That is my issue.
 
The problem is checking the box "ILS" and creating my own custom ILS causes MSFS to draw the beacons.
This is not consistent with my own experience, nor is it consistent with online tutorials. Is it at all possible you could be mistaken?

If you'll refer to the screen I captured, specifically to address my assertion above, you'll see there is an ILS placed, the feathers of which, at 30° off true North, significantly diverge from runway "3," but what I really want you to try to see, is any sort of "beacon" model at the placement of the ILS.

ILS Placed.jpg


Now, if you will review this video tutorial by "FlyingTheston," you can see he has created an entire video instructing how to add ILS transmitter models and align them with the ILS specified coordinates. According to him, the simulator does not automatically draw beacons.

 
Probably this:

Untitled.png


The above deletes the photogrammetry that is showing the 3d objects. Rick is right, as there is no object placed by the ILS code itself.
XML:
        <Ils lon="-87.8919361531734" lat="42.9638778045774" alt="210.616" frequency="110.300" magvar="4.000" range="50017.000" backCourse="TRUE" heading="11.131" width="3.4" ident="IMKE" name="ILS RW01L">
            <GlideSlope lon="-87.8952915966511" lat="42.9345693066716" alt="210.616" range="50017.000" pitch="3.000" />
            <Dme lon="-87.8909584879875" lat="42.9641500487924" alt="220.98" range="50017.000" />
        </Ils>
 
I figured it out, it's a cross-flag caching issue between the approach light settings and the ILS setting.
You have to disable the approach lights, close MSFS, and reload the project from scratch.
Just reloading doesn't always work.
 
Last edited:
I figured it out, you caught up, you're welcome.
Thanks, sorry, it's just these darned CACHING issues can drive me bonkers sometimes...

Now onto my next issue, which is faking the orb effect for the custom approach beacons using a Light Row I guess, I have to create those custom properties in the light row project.
I cannot believe Asobo hasn't added a default light orb yet, geeze they make everything harder than it needs to be with lights.
 
Back
Top