• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Frame Rates

Messages
612
Country
peru
Hi guys, looking at FlyTampa Hong Kong & KaiTak Airport which I wanted to buy, I came across an issue that has been on my mind several times. The people form FlyTampa recomend that if your computer in not capable of a minumum of 30 FPS frame rates, better not buy the product. And the question that has been in my mind after moving the settings display to different positions looking for the best setting is: how do I get to know or in other words how to I meassure the frame rates that I am getting with an especific setting. I am sure that more that one knows how to do this, an appreciate some help
Thanks
 
framerates

framerates arent as important as what you see on your screen...the max fps
possible depend on your monitor, if at 60hz. thats the max..lots of people claim amazing fps for theyre graphics card.if its more than theyre monitor they are discarded...waste of the gpu resources...framerate anxiety is a fetish
that some people suffer from, fsx is not a game,and doesnt behave like one..

if fsx,you must have sp1 and 2 installed, makes a big difference...

if fsx with acceleration then you already have...

if your present set up runs nicely, then your cpu is the place to look for extra
power..

fsx is quite happy with a mid range gpu, but needs cpu cycles...you could always run the in game framecounter.in the manual........use your eyes to judge not the fps...there are many tweaks available, depending on hardware..

some work for some,some dont work for others,,fsx fps behaves differently
from fs9..we are all looking for the perfect set up..nobodys found it yet..
keep searching...jim
 
Mameni

While in the sim hit ctrl+z twice and a frame counter will appear in the upper left corner.
THe PDF for Fly Tampa Hong Kong says that you should get at least the same of better performance as you do at any large default FSX airport at the same settings. So, if you are getting 10 fps at London, you may get that at Fly Tampa Hong Kong.

Bob
 
ok Jim,got you. And Bob thanks I will hit ctrl+z twice whilst on the sim a see what comes up.
 
Bob let me see if I understood, you say 'While in the sim hit ctrl+z twice and a frame counter will appear in the upper left corner. This is what I did and nothing showed:
1.-Opened FSX and whent to SPIM airport
2.-Placed my plane at the Gate
3.-Hit ctrl+z twice
4.-No frame counter appeared.

Did I do something wrong?
 
i was going to say the same....but its worth looking through the in game recource section, there are some suprising keyboard moves...with photo scenery installed and zoomed out to the planet earth view, i impressed my brother, who knows nothing, with my own sattelite feed by promptly zooming
in on his house..ime of to track down some degenerate polys...jim
 
yes yes ....shift+z. Too much on my mind, lately. Been doing a lot of music writing and editing. Ctrl+z is my friend>

Bob
 
Last edited:
OK my friends,will check with shift+Z, and Bob great on the music writing, I play the guitar,but never leaned to read music.
 
Bob,

I knew about a key that looks like a flipped & and another one like a C: and then you have those ## but how do you play ctrl+Z ?
 
FSXFrame Rates

Well my friends just to tell you that shift+Z did made the FRS indications to show up on the left corner of the screen. Now that I have them and see how they work as one moves the setting rulers up or down or go from a big airport to a small one, I guess that it's just a matter of working out the best setting, that will of course depend on what computer one has.
For intance with the same setting(Extremely High) I got the following readings for:
KMIA 2.8/3.5 FPS
SPIM 7.5/8.0 FPS
And when I droped to Dense settings;
KMIA 6.5/7.0 FPS which was allright and could see the Jetways
SPIM 10.8/19.0 FPS
Once again thank you
Regards
 
Mameni,

Always nice to meat a fellow guitar player. When I have time, I build guitars, also.
Don't forget to experiment with other settings, like water and clouds, and AI.

Roby,

Sometimes I play ctrl+z with one hand. Other times, I have to use two hands. It depends on which shift key I have to use. Yes ## and bb can be a pain;)

Bob
 
(Gee, another thread about framerates.)

In a previous thread there was this Hezooz that offered a previously unknown tweak to the FSX.cfg
Well, my framerates could not be worse, what with my Vista + Intel D915 2.8 , 2Gb RAM and Nvidia 7300SE is not surprising, so I thought I would try his tweak and surprise: it works, hardly any stutters no more and FPS went up by at least 5 (which is a lot when you only go down to 15 instead of 10).
The entries I added to my FSX.cfg:
[GRAPHICS]
...............
HIGHMEMFIX=1
STALE_BUFFER_THRESHOLD=2147483647

and


[JOBSCHEDULER]
AffinityMask=14

My FSX settings are:

Target frame rate unlimited
Resolution 1280 x 1024 x 32
Bilinear filtering, no antialiasing
Global texture resolution medium
Advanced animations checked
Level of detail radius medium
mesh complexity 100
mesh resolution 1m
texture resolution 30cm
Water effects 2x low
scenery complexity very dense
autogen dense
special effects high
airline traffic density 91%
GA 19%
Airport vehicle low
Road vehicles 17%
ships and ferries 72%
Leisure boats 7%
Detailed clouds, drawing distance 90 mi, cloud coverage medium.
That does not mean it works for someone else, but I am very pleased with it.
Turns out tuning FSX is harder than tuning your guitar.
 
There are a couple of things you can also test to see if it improves your rig's frame rates.

* Experiment with Windows screen and full screen modes. One will work better. Oddly, mine works better in Windows mode, but most other people, its with Full Screen mode. My older computer couldnt run FSX in Windows mode. (odd....)

* Anti-Aliasing or AA in Graphics Display settings. With mine, I click on that, and my rig drops 10 frames; from 30 to 20 or less. Over a busy area, about 10 or even 7. If you do screenshots, just turn it back on. If it makes no difference, just leave it on.

* Clouds are a huge hit on computers. I was told by a gaming studio owner that its because each cloud is transparent on its edges and that the computer must manage the perhaps 20 to 100 diff clouds and their images behind them, overlapping and all. The resources needed for that are immense. So lowering your clouds settings will always help in busy areas.

Try those before reducing all your scenery settings and things. Special Effects scenery is the coolest scenery. I usually have that cranked for all teh cool things at airports. I will suffer to have that then without... Autogen is another killer. Mine is set at about 50%.



Dont you just wish we could turn our computers to full max settings and it runs at 40 FPS!??! Would that be awesome or what.....


Oh to dream...



Bill
 
Roby

Any chance you could get a better GPU? My old rig was a 2.0 Ghz core duo with a 7950 gt, and didn't run FSX too bad. They say FS is cpu bound, but you gotta have a gpu to back it up. You probably don't want any advice, but you should try tunning a 12 string.

I am trying the stale_buffer thing now. Can't tell much difference yet.
 
Hi Bob, Bill,

Do my comments lead you to think I do not want any advice?
Your advice is much appreciated although I am aware that my GPU is a bottleneck. It is just that I have been living in Holland for too long and have become hesitant in spending money:D without knowing if it will really do any good. I just need everything better.
I used the stale buffer instead of the bufferpool=0 because the latter did not help me much.
I have no difference in fps between full and windowed screen.
Set AA in Nvidia screen.
I only fly when the weather is nice and do not bother about setting other weather conditions. If I want clouds, I just look out of the window.
Hate to turn autogen down (I already explained why) and I do not see much improvement if I do.
Native FSX aircraft seem to have less impact than most FS9 converted ones.
I tuned two 6 string guitars without a problem!:)

Yeah, I wish.
 
Back
Top