• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX in Apple

Messages
612
Country
peru
Recently found out that apple computers allow that windows is installed on the same hard drive.
Once this is done, they claim that the computers will work with either the apple or windows opperational systems, provided a software called paralels is installed. Once this is done, any software that runs under windows is recognized by the computer. Asked if Microsoft FSX could work, and they said, ofcourse without any problem
Just wonder if anybody has done this and has a real experience.
 
Thanks for your reply and the lynk provided has been helpfull in finding that in effect theere are guys already using FSX in apple computers.
 
Ok... an Apple mouse has one button... all other mice have 2 or 3 (or more). A lot of FS gauges use left mouse, right mouse... mouse wheel... how on earth can you use that interface with a mouse that has one button??
 
Ok... an Apple mouse has one button... all other mice have 2 or 3 (or more). A lot of FS gauges use left mouse, right mouse... mouse wheel... how on earth can you use that interface with a mouse that has one button??

Buy a mouse for 5 bucks...
 
Up until a couple of years ago, I worked on an Apple iMac computer, 24" iMac (all in one). It has a regular mouse (I upgraded) and it worked great. You use Boot Camp (program) that allows you to flip between booting up in Windows and in OSX. Works brilliant.

There is 'Wine' that allows some programs to run 'in' OSX, but not programs that have DirectX, so FS will not work. Some kids have hacked FSX to work in OSX, but it works very choppy and how they did it was vaguely documented (this was 5+ years ago).

NOTE: I think they just stated in a release that Windows 7 is no longer supported by BootCamp. They also no longer support Win XP. So you would have to settle for Win 8. :S (grim).

Probably the best way to go if you are a developer is to clone the HD in the Apple onto a 2TB drive and put Windows on one side, so you have 1TB of room. Mind you, SSD's are the REAL way to go as they are lightning fast, so you could just use external drives (external ports, socket drives, etc) and keep the OS drive (primary C: drive) smaller, but... If you use iTunes a lot (like for Podcasts and movies and TV shows) then you will want at least a 1TB drive, especially if you put Windows on it.


If only Samsung made a 500/500+ Read/Write 1 or 2 TB drive that was 'affordable'. Sigh.....


Some myths about Apples;
* You can buy your own HD's for them
* You can buy your own memory for them, just get the right ones. BestBuy and Frys Electronics carry a lot that work fine in Apples.
* Most every single mouse in the world works with Apple (that is modern that is. Ancient technology, mayan and Egyptian probably wont).
* Keyboards will require to be 'Apple' versions as they have 'Option' and 'Command' keys on their keyboards. The keyboards work fine in Windows mode and those keys are then Control and Alt keys.

The flat, aluminum Apple keyboard is about the coolest keyboard you can use, but you need the drivers for it to use on a Windows computer. :( (find them and you are one blessed person).
 
Ok... an Apple mouse has one button... all other mice have 2 or 3 (or more). A lot of FS gauges use left mouse, right mouse... mouse wheel... how on earth can you use that interface with a mouse that has one button??

All the mice I have seen and used with Apples and my past 2 Apples had 2 mouse buttons and a wheel, both wireless and wired. But.... You have to go into settings (in OSX) and set 'left mouse button' to be the clicker as its stock setting is 'right mouse button.' Again, this is only in OSX mode. Windows is different.
 
After reading your post reply, whent to an apple store to hear what they had to say:
FSX has to be loaded to the imac hard drive. Then they said I had 2 options to run FSX, either using a software that comes installed, forgott the name, could it Boot Camp? Or would I need to buy it, and/or use another software by the name of parallels. Doing this they assured that FSX would perform perfectly.
The issue abour the mouse is now very clear thanks.
Now, how about the main programs that I like to use: ADEX, FSREPAINT, MYTRAFIC X,VOICE EDITOR, will they work and will my liveries be recovered.
As you can guess, my concern is that being apple a big investmemt, i really need to have all issues that I can thing of fully adresed and help coming from you guys is of most importance to me.
Nest regards to all
 
After reading your post reply, whent to an apple store to hear what they had to say:
FSX has to be loaded to the imac hard drive. Then they said I had 2 options to run FSX, either using a software that comes installed, forgott the name, could it Boot Camp? Or would I need to buy it, and/or use another software by the name of parallels. Doing this they assured that FSX would perform perfectly.
The issue abour the mouse is now very clear thanks.
Now, how about the main programs that I like to use: ADEX, FSREPAINT, MYTRAFIC X,VOICE EDITOR, will they work and will my liveries be recovered.
As you can guess, my concern is that being apple a big investmemt, i really need to have all issues that I can thing of fully adresed and help coming from you guys is of most importance to me.
Nest regards to all
Parallels is crap for running FSX, I'd reccomend getting a copy of Windows and installing it using the utility Boot Camp that comes pre-installed on Mac OSX, so you can dual-boot Windows and Mac, it works great.
 
There is no point in using FSX at all unless you are going to use it under Windows running on hardware directly. No virtualization, no emulation.

Since Apple now uses industry standart components (IBM PC clone as used to be known back in the day :) ) and not PowerPC architecture anymore, you can run W7 on it. There was talk of BootCamp not being happy with Win7 anymore, worst case you use Grub. MacOS is just a Unix in pretty clothes anyway.


btw. I have to say, why Apple, specifically? Do you have a reason why you want to use OSX? You can usually get, or better yet, build a PC with equivalent power for less price.
 
Thanks again guys. really what I am trying to do is to improve my current PC which is in fact a vaio 17 inch laptop, with i7 processor 2gb, an Nvidea 550 graphics card, 8GB RAM and recently a 1TB hard drive. In spite of all this, which I think is more than enough, I am not happy with how FSX performs and it often crashes. Maybe because it is a laptop? Don't know. Anyway, being that the reason, I was considering the apple imac because of what I have heard, concerning its stability and looking for FSX to perform as it should. In the process I am of course considering the possiblity of building a PC with the equivalent power as per pfabian recomends, and have started to quote it.
Mean time I have sure learned a lot from you guys
 
H
Whilst I can appreciate the beauty and the design that go's into the Imacs...they are an absolute pigs to work on :) Ive had 2 come through in the last 6mths both needing new HD's which had failed(these were both 4 to 5 yo)
 
Than
H
Whilst I can appreciate the beauty and the design that go's into the Imacs...they are an absolute pigs to work on :) Ive had 2 come through in the last 6mths both needing new HD's which had failed(these were both 4 to 5 yo)
 
Of all the various points touched, none have mentioned if the crash problems that I am often having with FSX could be because of the use of a laptop as described above instead of a desk computer. In other words are desk computers more efficient than laptops when FSX is considered, having both the same specs? Comments appreciated on the matter.
 
Of all the various points touched, none have mentioned if the crash problems that I am often having with FSX could be because of the use of a laptop as described above instead of a desk computer. In other words are desk computers more efficient than laptops when FSX is considered, having both the same specs? Comments appreciated on the matter.

Laptops are inherently worse at thermal management. That's about it... if you aren't overtemping, than the crash should not matter if you have a laptop or a desktop. Beware though that they are actually comparable - devil is in the details. You may not think much about HDD speed, but it can bite you in a laptop. And be aware that sticking an M to the model number doesn't mean the same power, just made to fit in a laptop.

Other than that, I can say that I used laptops extensively and exclusively as my FS machines for about 5-6 years, and they served well.

Sent from my Nexus 10 using Tapatalk
 
Bootcamp comes 'with' OSX. You then follow the instructions for loading up Windows in it.

You will need Windows to run all of your tools programs with. You boot up your Apple, hold down Option key when the Apple is booting up. You will see hard drive icons appear, named. Select the Windows version and it will boot up into Windows.

My laptops can run FSX and P3D (especially P3D) fine, but I have powerful laptops. You do need to reduce some of the settings though as usually the chips in laptops aren't moderately powerful, nor the built in Mobo graphics cards.

My ole Alienware laptop, M9150 literally had 2 hard drives and 2 actual plug-in powerful graphics cards (small graphics cards for laptops). Amazing for an ole WinXP computer and laptop. I wonder what their new laptops are like. Probably screaming powerful....
Note; the M1950 probably weighed 10 pounds, lol. Difficult to carry around. Its powerpack was also nicknamed the 'brick' by Alienware users. Its about 4 or 5 pounds of weight in itself. Plus the Battery in the AW only lasts a short time as you have high performance chips and GC's.
 
Back
Top