• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Multiplayer visibility issues

Messages
468
Country
ca-ontario
While testing my aircraft in multiplayer last night we noticed a problem with parts that have a visibility condition attached to them and I wondered if anyone here knew what caused it and if there is a fix.

I have chocks that appear when the aircraft is on the ground and the parking brake is on and I have tie-downs, concrete blocks and a pitot tube cover that appear when the aircraft is on the ground, the engine is off and the parking brake is on. All the above work correctly in single player mode.

In multiplayer we noticed that the tie-downs, chocks and pitot cover were visible on the other aircraft when the engine was running and when it is in the air. The chocks never showed on the other aircraft at all, regardless of parking brake setting.

I can live with the invisible chocks but the 'parked parts' are a show stopper in multiplayer. Has anyone seen this behaviour before and if so is there a solution to the problem?
 
Last edited:
Well I just tried that and the parts still show on the other aircraft in multiplayer regardless of engine and on-ground state. :confused:

Here is the code line I am using now:

Code:
<Code>
       (A:SIM on GROUND, bool) ! == (A:IS USER SIM,bool) == (A:BRAKE PARKING POSITION, bool) == if{ (A:ENG1 HYDRAULIC PRESSURE, psi) ! 100 * } els{ 0 }
      </Code>
 
Well I just tried that and the parts still show on the other aircraft in multiplayer regardless of engine and on-ground state. :confused:

Here is the code line I am using now:

Code:
<Code>
       (A:SIM on GROUND, bool) ! == (A:IS USER SIM,bool) == (A:BRAKE PARKING POSITION, bool) == if{ (A:ENG1 HYDRAULIC PRESSURE, psi) ! 100 * } els{ 0 }
      </Code>


Your code lacks of and operator.

I would try, for pitot tube covers:

Code:
<Code>
      (A:SIM on GROUND, bool)   
      (A:BRAKE PARKING POSITION, bool) and 
      (A:ENG1 HYDRAULIC PRESSURE, psi) 0.1 &lt; and
      if{ 100 } els{ 0 }
</Code>

Tom
 
Thanks Tom that fixed it. Here's my working code if anyone needs it later.

Code:
<Code>
(A:SIM on GROUND, bool)
(A:IS USER SIM,bool) and
(A:BRAKE PARKING POSITION, bool) and 
(A:ENG1 HYDRAULIC PRESSURE, psi) 0.1 &lt; and
if{ 100 } els{ 0 } 
</Code>
 
I think it is better to create an extra model for online flights.

In FS recorder would all options, with "A:IS USER SIM" lost.
 
Back
Top