- Messages
- 1,451
- Country

Hello lads!
I just want to do a brief history of my Bell 429 project. Since the very beggining, I always wanted to create a model from scratch. He was so excited, that I purchased my 3D images and FSDE (with its own 6 book collection). I tried many things and I couldn't master this program. Not all was a waste, with those ebooks, I have an exelent reference material. Here are some poor samples:
1.- Learning the basic "box modeling" technique:
2.- Learning how to "bend tubes"
3.- And finally, getting some results...
As you may, see, all meshes are wrong... However, I manage to use the boolean tools to do some cuts (I hate those in any program!
). Nowadays, this is my worst scenario: try to model a neat, clean and well designed mesh for windshields, windows, doors, etc. without any boolean involved.
I was happy to see my basic model working in FS9. I did some "test flights" and now was the "right time" to work on the parts mentioned above. Many troubles and I was not able to tackle the problems... That's why I left aside this program.
After watching, reading and try to find a new software to use, I decide to use a 3ds Max trial version (2013, 64 bit). I was like a child in a toy store! I learned many things and I am still doing it. When the trial time expired, I was lucky enough to have sorted some troubles. I managed to export the basic geometry to Gmax. My meshes are intact! However, the progress is very slow and the overall scale was killed...

I start (again...) from scratch the transition between using 3ds Max and Gmax and this is what I have today:
(This image above shows the imported mesh from 3ds Max).
With box modeling (a tube as basic primitive) and using the "cut" tool I was able to round this basic profile. It took me months and many head aches to achieve this only...

I am very happy on how the windshield basic shape looks and and I have to start again (for the thousandth time) just to get this point in Gmax.

A few minutes ago, I used Makemdl.exe to send this to FS9. And surprise... it was 150m long!!!!!!!!!
As you can see, no errors were dropped by MakeMdl.exe
I learned how to overcome the triangulation and overlapping vertices problems (a big step for me).
Now, I will use Gmax and try to sort crash problems with this "geriatric tool" (I am quoting someone here and I can't remember who!) I am like a child playing with clay compared to you.
Any ideas on how to tackle the windshield, doors and other cuts will be very welcome (matched to Gmax and FS9).

Here are some details:
After all this painfull years, I don't want to stop trying. Hopefully, someday this model will brought to light...
Kindest regards,
Sergio Kauffman.

P.S. sorry for this long post.
I just want to do a brief history of my Bell 429 project. Since the very beggining, I always wanted to create a model from scratch. He was so excited, that I purchased my 3D images and FSDE (with its own 6 book collection). I tried many things and I couldn't master this program. Not all was a waste, with those ebooks, I have an exelent reference material. Here are some poor samples:
1.- Learning the basic "box modeling" technique:
2.- Learning how to "bend tubes"
3.- And finally, getting some results...
As you may, see, all meshes are wrong... However, I manage to use the boolean tools to do some cuts (I hate those in any program!
I was happy to see my basic model working in FS9. I did some "test flights" and now was the "right time" to work on the parts mentioned above. Many troubles and I was not able to tackle the problems... That's why I left aside this program.
After watching, reading and try to find a new software to use, I decide to use a 3ds Max trial version (2013, 64 bit). I was like a child in a toy store! I learned many things and I am still doing it. When the trial time expired, I was lucky enough to have sorted some troubles. I managed to export the basic geometry to Gmax. My meshes are intact! However, the progress is very slow and the overall scale was killed...
I start (again...) from scratch the transition between using 3ds Max and Gmax and this is what I have today:
(This image above shows the imported mesh from 3ds Max).
With box modeling (a tube as basic primitive) and using the "cut" tool I was able to round this basic profile. It took me months and many head aches to achieve this only...

I am very happy on how the windshield basic shape looks and and I have to start again (for the thousandth time) just to get this point in Gmax.

A few minutes ago, I used Makemdl.exe to send this to FS9. And surprise... it was 150m long!!!!!!!!!

As you can see, no errors were dropped by MakeMdl.exe
I learned how to overcome the triangulation and overlapping vertices problems (a big step for me).
Now, I will use Gmax and try to sort crash problems with this "geriatric tool" (I am quoting someone here and I can't remember who!) I am like a child playing with clay compared to you.
Any ideas on how to tackle the windshield, doors and other cuts will be very welcome (matched to Gmax and FS9).
Here are some details:
After all this painfull years, I don't want to stop trying. Hopefully, someday this model will brought to light...
Kindest regards,
Sergio Kauffman.

P.S. sorry for this long post.
