• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX SBuilderX ?

Messages
79
Country
ca-britishcolumbia
What does SBuilserX have that ADE doesn't, do I need them both?
One of the issues I have with ADE is that I'd like to place a float plane dock against the shore at 99Z but there's no way to tell where the shore line is. I tried the background image thing but that's way above my pay grade. Will SBuilderX be easier to do this with?

Also, is there an objects library available to download on this site?
Thanks for any insight. :)
 
Well, I must be missing something, I locked both ADE and FSX together but I stll see no way of adding a floatplane dock to the shore at the end of the west runway. :(
 
Mark two points of the shoreline:



Add the dock model:







Position at the shore:



Create a start point:



Close FSX. Compile the airport and add to an active scenery area.

Open FSX and select the airport:



You should be at the dock:

 
I feel like I must be stupid. I understand how to place objects, that's not a problem, my issue is step #1 in your tutorial. I have FSX in the downward view and ADE locked to it, but I see no way to draw the points on the shoreline. Thank you for your trouble.
 
Whilst FSX is in focus, press the "M" key. This will place a mark on the ADE grid.

BTW. There is a comprehensive manual installed with ADE.
 
Well, thanks anyway, I made marks in ADE, nothing shows in FSX pressing M or not. Have a good day. :)
 
http://www.fsdeveloper.com/forum/threads/sbuilderx.441287/#post-783626

Whilst FSX is in focus, press the "M" key. This will place a mark on the ADE grid.

BTW. There is a comprehensive manual installed with ADE.

Hi George:

Are you referring to a particular version of ADE regarding use of the "M" key, and with regard to inclusion of the ADE Manual ? :scratchch

http://www.scruffyduck.org/downloads/4584110854

cP025dtqHja9ueqEgf31Jcf3Pws.png

ScruffyDuck Software

The current production version of ADE (1.75) can be downloaded from here.


The model footprint database for ADE 1.70 and later can be downloaded from this link


The latest manual is no longer included in the full installer above but can be downloaded here


ADE v1.65 Manual, on Page 308 of 309 Pages ...states:

15.2 Keyboard Shortcuts

These are the keyboard shorts-cuts you can use in ADE:

"M – Centers the ADE display on your current mouse location."


Would I be correct, George, that you are referring to use of a "Guideline" or "Position Marker" ? :confused:


ADE v1.65 Manual, on Page 267 of 309 Pages ...states:

14.9 Guidelines and Position Markers

"14.9.1 Guidelines

Guidelines are ruler lines that can be drawn anywhere on the ADE airport schematic."


ADE v1.65 Manual, on Page 269 of 309 Pages ...states:

"14.9.2 Position Markers

These are just simple marks that you can place anywhere on the airport."


Thanks in advance for your further clarification. ;)

It has been a while since we have seen one of your excellent illustrated mini-tutorials; thanks for sharing your insights with us ! :teacher:

GaryGB
 
Last edited:
"14.9.2 Position Markers

These are just simple marks that you can place anywhere on the airport."

I fully understand how to place objects on a regular airport, my problem is how do I place a floatplane dock on a shore close to a water runway that shows nothing but a blue strip with start points. There's no reference to any land mass in ADE. How do I know where to place "marks?" There's no way that I know of to make marks in FSX to show up in ADE to show where the land is. Golf's first illustration just confuses me. Sorry.
 
Hi Alky:

Hopefully George might reply soon.

I am also not quite familiar with a process enabled by ADE which would (knowingly) re-map a key-press in FSX:


[FSX install path]\Uires\kneeboard_keys.htm

SIMULATOR COMMANDS

Magnetos (select) = M


http://stridspilot.se/files/FSX_KeyCommands.pdf

ENGINE COMMANDS


On multiengine aircraft, engine
commands affect all engines
unless you first select an engine

Magnetos (select) = M


Perhaps George is familiar with an undocumented key-press re-mapping feature in ADE that we do not know about ? :scratchch


BTW: Is this a fictional water RWY you are creating ?

If so, are you using default Land Class scenery textures ?


Or are you instead using custom photo-real aerial imagery Land Class textures ?

If you are using custom photo-real aerial imagery Land Class textures, did you 'Add' a "Background" image of the site into ADE ?


Alternatively you can do this in SBuilderX over a photo-real aerial imagery "Background" image that it downloads for you.

SBuilderX will also "connect" to FSX via FSUIPC, BTW.


Both SBuilderX and ADE show the aircraft position with a cross-hair in their respective work-spaces if 'connected' to FSX.


Hope this helps ! :)

GaryGB
 
Last edited:
BTW: Is this a fictional water RWY you are creating ?

If so, are you using default Land Class scenery textures ?

Or are you instead using custom photo-real aerial imagery Land Class textures ?

If you are using custom photo-real aerial imagery Land Class textures, did you 'Add' a "Background" image of the site into ADE ?

The runway is 99Z in FSX. I imported the ORBX .bgl file and saved it as a project file to be saved to the FSX scenery library later.
I downloaded the manual and am trying to make sense of the 14.13.2 section regarding the slewing of the aircraft in FSX and making marks in ADE. I may be getting on to it. :)
 
Ok, looks like I got it. The aircraft has a symbol for it's location in ADE when it's locked with FSX, you slew the plane to desired positions and then mark them in ADE.
I've accomplished my goal and learned something today. :)
The dock needs to be replaced, it was a random pick because there was no thumbnail. Will find something without railings LOL



e2bjGJD.jpg
 
I am also not quite familiar with a process enabled by ADE which would (knowingly) re-map a key-press in FSX:
It is apparently undocumented but is exactly the same as Afcad2:



It doesn't remap the key in FSX (why would one require a magneto command when connected to ADE? ), it is intercepted by FSUIPC.
 
Last edited:
http://www.fsdeveloper.com/forum/threads/sbuilderx.441287/#post-783639

Ok, looks like I got it. The aircraft has a symbol for it's location in ADE when it's locked with FSX, you slew the plane to desired positions and then mark them in ADE.

I've accomplished my goal and learned something today. :)

The dock needs to be replaced, it was a random pick because there was no thumbnail. Will find something without railings LOL

Looks good, Alky ! :cool:

To see more choices of docks, here's a visual guide to default Water Objects in FSX: :idea:

http://lc0277.gratisim.fr/sceneobjects/waterobjects/

Have Fun ! :)

GaryGB
 
http://www.fsdeveloper.com/forum/threads/sbuilderx.441287/#post-783640

It is apparently undocumented but is exactly the same as Afcad2:




http://www.fsdeveloper.com/forum/threads/sbuilderx.441287/#post-783640

(why would one require a magneto command when connected to ADE? )

Perhaps to keep Jon "energized" ? :p

Just kidding, of course ! :D


http://www.fsdeveloper.com/forum/threads/sbuilderx.441287/#post-783626

Whilst FSX is in focus, press the "M" key. This will place a mark on the ADE grid.

I assumed ADE would have to remap the key in FSX when you stated:

"Whilst FSX is in focus, press the "M" key. This will place a mark on the ADE grid."


Upon reading your statement with no other accompanying explanation, and nothing to be found in the ADE v1.65 Manual that substantiates your assertion of an option to press "M" to 'Create A Marker' via "Keyboard Functions" as described, I believe that one would most likley infer the FSX task session "is in focus" ...within Windows task manager, and therefore the key-press is being "re-mapped" (whether by FSUIPC at the direction of ADE, via another process implemented by ADE itself). ;)


http://www.fsdeveloper.com/forum/threads/sbuilderx.441287/#post-783640

It doesn't remap the key in FSX...

...., it is intercepted by FSUIPC.


The only search results I could find on "ADE Keyboard Functions" is here:

http://www.fsdeveloper.com/forum/threads/suggestion.439178/

http://www.fsdeveloper.com/forum/threads/add-position-markers-from-fs-to-ade.429162/

https://www.google.com/search?biw=1173&bih=624&q=site:www.fsdeveloper.com+ADE+Keyboard+Functions+"Marker"&oq=site:www.fsdeveloper.com+ADE+Keyboard+Functions+"Marker"&gs_l=psy-ab.12...227387.243697.0.246379.3.3.0.0.0.0.74.206.3.3.0....0...1.1.64.psy-ab..0.0.0....0.0RoHptzgStQ


Apparently this means that one must have both a payware version of FSUIPC ...and a ADE ProKey. :rolleyes:

GaryGB
 
Last edited:
Back
Top