Milton_Shupe
Resource contributor
- Messages
- 331
- Country

This is a pesky little problem that has now cost me a day and a half of work.
Background: Converting an FS9 aircraft to FSX native (EDIT: using gmax and FSXA direct export). Finished all the exterior animations, tags, visibilities. Exported fine 5-6 times as tests. Started in the interior model, got all animations, tags and visibilities done except VC. To save time, I had cloned exterior control surfaces, props and gear to the interior model and re-linked, then used the animation manager and attachpoint tools to reapply those things.
Somewhere in the clone process, I also cloned some flap hinges unknowingly. They are duplicates. EDIT: They are NOT animated parts.
So, now I have an exterior model and interior model that individually export fine (sometimes), and I have some extra parts that belong to neither, root parent is the scene, that also exports fine.
Problem: If I try to delete those extra parts, my exports fail with the attached message.
What I have done:
1) No modeldef changes in 10 days (its also backed up)
2) Checked Animation Summary to ensure all tags, animation names, and key frames are correct (no negatives, no out of range numbers)
3) Checked Trackview: No scale issues on any part; no Notes of any kind.
4) Dropped back 15 saves to where i cloned parts and problem exists right after the clone
5) Went back further and all is well (represents minimum 6-8 hours work if I start over)
6) Tried merging exterior and interior only to new scene without extra parts-same export problem
7) I can export the extra parts fine alone, or with either the exterior model or interior model and export works without errors
8) I just cannot delete the extra parts.
9) I have successfully deleted 7 of the 8 sets of parts and I can still export as #7 above
10) Tried linking the parts to the exterior model, and to the interior model, export fails either way.
11) I checked all the gmax root folder files to see if any updates of any kind have been done. I see none. I also checked all the cfg files, root paths, etc and see nothing that has changed.
12) Viewed successfully exported mdls in MCX and it reports no issues loading, and none in the various object viewers.
13) Exterior model size is 30,278 triangles, 25,945 vertices
EDIT: Other things to consider:
1) FSTools does not always start with gmax; I almost always have to start it manually. It runs out of the FSX Gmax Game Pack Scripts.
2) Second, after the attached message is displayed and all other export failed messages, when I go to close gmax, it usually (not always) freezes my system hard requiring a power off re-boot.
Next Steps:
1) I can always start over if not resolved; I do not want to carry these problem parts forward
2) Looking for ideas to find the solution to this issue
EDIT: Well, I finally worked through about another 20 senarios with no resolution. So, I decided to go back to the beginning. Now I get the same error on the beginning of the series. That makes me think this is system related. I will go test other previously successful conversions.
EDIT2: I successfully exported other aircraft earlier conversions without issue. :-/ no,
So, still confused on this one. That tells me there is a "triggering" object/UVW/material/link/tag/animation causing this in this scene only.
EDIT3: I am attaching the gmax1.2 source if anyone would like to look at it.
EDIT4: I went back 7 versions, grabbed an exterior model that exported successfully; got the most recent interior model merged to that. Deleted 7 of the 8 cloned parts that were causing issues. Also deleted another part from both models that on occasion would show a UVW mapping error.
So far, I have been able to export both ext/int models without the error. I do not export the 1 set of cloned parts; ignored that. I have proceeded to complete all animations, visibility tags, and exports continue to work. However, the warnings after export show many of the interior model parts as being pruned from the animation scene. However, all interior animations are working fine. Confusing.
Also, I still get a gmax lockup on occasion when closing it, sometimes just a 10-30 second wait before it closes, or it will lock up the system hard requiring a power off-reboot. This may be unrelated to this problem as I had the slow gmax FSX closes before this project.
Curious if when you merge in another interior model, does that get accepted by the GUID friendly name (both should have been the same.) Also, is there a way to homogenize the two models to eliminate the list of pruning messages.
Suggestions appreciated
Thanks in advance
Background: Converting an FS9 aircraft to FSX native (EDIT: using gmax and FSXA direct export). Finished all the exterior animations, tags, visibilities. Exported fine 5-6 times as tests. Started in the interior model, got all animations, tags and visibilities done except VC. To save time, I had cloned exterior control surfaces, props and gear to the interior model and re-linked, then used the animation manager and attachpoint tools to reapply those things.
Somewhere in the clone process, I also cloned some flap hinges unknowingly. They are duplicates. EDIT: They are NOT animated parts.
So, now I have an exterior model and interior model that individually export fine (sometimes), and I have some extra parts that belong to neither, root parent is the scene, that also exports fine.
Problem: If I try to delete those extra parts, my exports fail with the attached message.
What I have done:
1) No modeldef changes in 10 days (its also backed up)
2) Checked Animation Summary to ensure all tags, animation names, and key frames are correct (no negatives, no out of range numbers)
3) Checked Trackview: No scale issues on any part; no Notes of any kind.
4) Dropped back 15 saves to where i cloned parts and problem exists right after the clone
5) Went back further and all is well (represents minimum 6-8 hours work if I start over)
6) Tried merging exterior and interior only to new scene without extra parts-same export problem
7) I can export the extra parts fine alone, or with either the exterior model or interior model and export works without errors
8) I just cannot delete the extra parts.
9) I have successfully deleted 7 of the 8 sets of parts and I can still export as #7 above
10) Tried linking the parts to the exterior model, and to the interior model, export fails either way.
11) I checked all the gmax root folder files to see if any updates of any kind have been done. I see none. I also checked all the cfg files, root paths, etc and see nothing that has changed.
12) Viewed successfully exported mdls in MCX and it reports no issues loading, and none in the various object viewers.
13) Exterior model size is 30,278 triangles, 25,945 vertices
EDIT: Other things to consider:
1) FSTools does not always start with gmax; I almost always have to start it manually. It runs out of the FSX Gmax Game Pack Scripts.
2) Second, after the attached message is displayed and all other export failed messages, when I go to close gmax, it usually (not always) freezes my system hard requiring a power off re-boot.
Next Steps:
1) I can always start over if not resolved; I do not want to carry these problem parts forward
2) Looking for ideas to find the solution to this issue
EDIT: Well, I finally worked through about another 20 senarios with no resolution. So, I decided to go back to the beginning. Now I get the same error on the beginning of the series. That makes me think this is system related. I will go test other previously successful conversions.
EDIT2: I successfully exported other aircraft earlier conversions without issue. :-/ no,
EDIT3: I am attaching the gmax1.2 source if anyone would like to look at it.
EDIT4: I went back 7 versions, grabbed an exterior model that exported successfully; got the most recent interior model merged to that. Deleted 7 of the 8 cloned parts that were causing issues. Also deleted another part from both models that on occasion would show a UVW mapping error.
So far, I have been able to export both ext/int models without the error. I do not export the 1 set of cloned parts; ignored that. I have proceeded to complete all animations, visibility tags, and exports continue to work. However, the warnings after export show many of the interior model parts as being pruned from the animation scene. However, all interior animations are working fine. Confusing.
Also, I still get a gmax lockup on occasion when closing it, sometimes just a 10-30 second wait before it closes, or it will lock up the system hard requiring a power off-reboot. This may be unrelated to this problem as I had the slow gmax FSX closes before this project.
Curious if when you merge in another interior model, does that get accepted by the GUID friendly name (both should have been the same.) Also, is there a way to homogenize the two models to eliminate the list of pruning messages.
Suggestions appreciated
Thanks in advance
Attachments
Last edited:


