• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

ailerons

Messages
3
Country
us-newjersey
hi, new to fsx and dont have a joystick yet but was wondering i see youtube videos show aileron and rudder movments but when in autopilot mine do not move. if not in autopilot i use arrows and see movement, but in autopilot do not see this cany someone help me?
thank you
 
Hi,

When in autopilot heading and altitude are fixed and controlled by the autopilot. Your manual control surface inputs are therefore not honored something which seems rather logical to me.
There is a small program though that re-enables manual heading inputs. It is a file called ffwlvx.zip (Flight Simulator Force Feedback and Wing Leveller Utility).
 
hi what i was asking was how come fsx doesn't show aileron and rudder movements when in autopilot. it only shows flap movement. if i turn autopilot off and use my keyboard the ailerons will move when i turn using the arrow key on the keyboard. is there any way to have the aileron and rudder show movement when in autopilot?
 
Hello,

default FS autopilot works by changing trim instead of actual controls (as far as I can tell). I am afraid with using default AP it would be kinda more difficult to do.
 
hi what i was asking was how come fsx doesn't show aileron and rudder movements when in autopilot. it only shows flap movement. if i turn autopilot off and use my keyboard the ailerons will move when i turn using the arrow key on the keyboard. is there any way to have the aileron and rudder show movement when in autopilot?

Autopilot uses the trim in most aircraft to impact the travel path. Very minor changes in the surface is all thats required to turn the aircraft. A 2 min turn (standard rate for commercial a/c and all ifr) doesnt need much bank to complete.

Also, flaps are used for landing, and rarely takeoff, only. Dont confuse flaps for ailerons. Flaperons are ailerons that act as flaps in the landing phase.
http://en.wikipedia.org/wiki/Flap_(aircraft)
http://en.wikipedia.org/wiki/Aileron
http://en.wikipedia.org/wiki/Flaperon
 
thx kevin that explains somethings, http://www.youtube.com/watch?v=hsumayyjJsY when i saw this i was wondering when i land my planes they dont have movement of the rudder or ailerons, starting at 1:28 the ailerons and rudder show movement. i was wondering if there is something wrong with my settings the only time i see aierons move is when not in autopilot and using arrow keys since i dont have joystick.
 
Last edited:
Yea, most commercial aircraft land with autopilot on until final. Even then some keep it engaged until short final (1 mile or less usually) then use manual to get the flare. To see that much movement in the ailerons that close to the runway shows the pilot is not experienced. Always remember, make Small corrections, light on the controls. A stabilized approach is an easy approach. Stiff arming will make a rough landing. Note that Wind can make a big difference in control type, and with a fog like that, you would have calm wind. Usually higher winds blow the fog out.

AP is entirely pilot choice though. Pilot can take manual.
Autopilot is required for RVSM flights, Cat II and III ILS approaches but not necessarily used. Each operator if under Part 121 or 135 or 91 must submit policies to indicate whether they require it, but its organization dependent. Its not required to use, but if you are flying with minimums less than 300ft of drift altitude (RVSM) and you drop outside of that limitation, then you will have a nice time with ATC and FAA when you land, and the ASRS form you will need to file to protect your butt. The line "I didnt notice it for the first few seconds" is not a valid statement, and it will be countered by the "Use all available information and tools to satisfy the rules and operate safely." Operating safely means holding your altitude. When its assigned, its for a reason. Ill stop here because I will go on if I dont.


PS: I recommend getting a joystick. Walmart had a cheap one for $20 a few weeks ago. I cant remember what it was. Newegg.com as well.
 
Last edited:
Back
Top