• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Alpha and Reflections

Messages
35
Country
australia
Hi,

I'm new to this forum, though I've painted on-and-off since FS95. I hope this is in the right forum. If not, please relocate it and let me know. I also searched several forums on this issue before posting.

In FSX, I've successfully added a chrome effect and a reflective paint effect to some payware aircraft textures, but I've run into 2 problems.

1. For Camsim's Phenom 300, I tried to give the existing texture a shiny surface, first from scratch, then making 2bit grey scale bmp's, then modifying existing 8 bit 256 bmp's from other aircraft. Each time, instead of shiny I get transparent. I'm thinking that maybe the model design hasn't got "shiny" turned on, or is there a way to still get shiny paint?

2. For FSD's Cessna 337H, I successfully created reflective chrome leading edges. So I thought I would try some chrome on the fuselage. All I get is charcoal paint where the chrome should be. What am I missing?

Are these 2 issues related in some way?

Thanks,
Narrator
 
Hi!

Not having either of the two aircraft you mention it's difficult to give an informed opinion. Have you analyzed the original textures in question - sent them through mdlmatxx or dxtbmp or imagetool, and have you replicated their original parameters exactly? (dds type, alpha etc)?

Nice alias ...
 
Last edited by a moderator:
In FSX models you can decide on the source file level wether you want the alpha channel to define reflections or transparency.
Also one can define what kind of algorythm to use for reflections, in a nutshell chrome and default.
Assumed the Phenom is an FSX native mdl you'll probably be out of luck then since the properties are burned into the mdl.
 
Last edited:
Assumed the Phenom is an FSX native mdl you'll probably be out of luck then since the properties are burned into the mdl.
It is possible that they have used the alpha channel in the spec map to modulate reflection, which might enable you to create a shiny (if not chrome) surface.

The alpha channel in the diffuse channel is clearly being used for transparency, so that is not an option for you, and not changeable.

It may be possible to open the mdl file in ModelconverterX to take a peek at the material settings for this particular material. (probably quite a useful tool for painting too, if the truth be known)
 
Have you analyzed the original textures in question - sent them through mdlmatxx or dxtbmp or imagetool, and have you replicated their original parameters exactly? (dds type, alpha etc)?

Nice alias ...
Thanks, I've always liked the alias.

I use dxtbmp. The original textures had no alpha image. Beyond that, I'm very much the amateur.

In FSX models you can decide on the source file level wether you want the alpha channel to define reflections or transparency.
Also one can define what kind of algorythm to use for reflections...

I assume this advice is as a model designer, which seems like it's well beyond my current skills.

The alpha channel in the diffuse channel is clearly being used for transparency, so that is not an option for you, and not changeable.

It may be possible to open the mdl file in ModelconverterX to take a peek at the material settings...

Thanks much. I googled and downloaded ModelconverterX. I then loaded the mdl file for the Phenom 300 into it. I'm guessing at the meaning of much of it, and the consequences of changing any of it. Is there an idiots guide for using it? It certainly has me intrigued.
 
The information for the materials is the same as the that in the FSX SDK

If you can post the Material rollout for the relevant texture, we may be able to explain it for you.
 
The information for the materials is the same as the that in the FSX SDK

If you can post the Material rollout for the relevant texture, we may be able to explain it for you.

Not sure what you mean by the rollout. In the right hand pane of the material editor, there's about 50 items - everything from Alpha test and bloom to z-bias and zz_ignore. And that's just for the item 300FUSEP_T, one of several items.

As for the SDK, I'm following the wiki on installing it and the "essential components" to go with it. I can see a steep learning curve ahead...
 
Fuse_T is probably the fuselage.

All of those parameters are the ones I was referring to.

A screenshot / list of those should be easily deciphered.
 
If the original texture hasn't got an alpha it probably doesn't for a reason.

If the model uses a specular texture sheet associated with the material in question - look out for a file name using _SPEC - then try tweaking that, as has been suggested.

If there is no spec sheet then your remaining best bet is the specular color slot. Check what its value is - the material ed in MdlConverter will show you - and if it is middling dark, lighten it. Save as a mdl. If that doesn't work, try mdlmatxx to patch the value into the mdl.

Mind you, patching the mdl can only be for your own use...

Edit: Bah, googling "camsim phenom" most finds seem to refer to a FS9 portover - in which case you can disregard all FSX-related comments here, and you should've told us from the beginning.
 
Last edited by a moderator:
Edit: Bah, googling "camsim phenom" most finds seem to refer to a FS9 portover - in which case you can disregard all FSX-related comments here, and you should've told us from the beginning.

lol.. Apologies, I had forgotten that aspect of the model. I guess I assumed it was a faithful port. And from what I've seen, a majority of 3rd party FSX aircraft seem to originate from FS9 parents. But then, as mentioned, I'm very much the amateur, trying to learn. Cheers.
 
you can make alpha textures 2 ways in FSX, although they made it easy so you can adjust the alpha with a slider rather than the darkness of a alpha layer applied. And less work. There is a posting here with pictures showing what setting to use in the material editor!
 
The issue here is a pre-made model, which the OP is painting.

Using the spec alpha might be interesting, but the Alpha Multiply slider is not going to be of use here.
 
Back
Top