• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Animated Skis

n4gix

Resource contributor
Messages
11,674
Country
unitedstates
Does anyone know off hand how to animate skis?

I've just spent a couple of hours animating skis and bungee cords for the DHC-2 Beaver and it'd be a real shame not to see them moving in the sim. :oops:

Ignore the 'bones' as they won't show up in the sim...

l2vkH.jpg
 
Found some good pics. The last 2 pics show the up and down position.

1292009761-deHavilland_Skis_011.jpg

1196_C-FXPC_Rob_Mitchell_Cochrane_17122009_ski_450.jpg


Up position

47a_n929kt.JPG

Down position
54c5358c0.jpg


When the hydraulic is retracted the ski is lowered. And when the hydraulic is extended the ski is raised. This seems backwards but i can see it from these pics. I am making a quick sample of how it works and will post it here later.

SKI_1.jpg

SKI_2.jpg


Gmax file to see what i animated.
http://flysimware.com/website/FSDEVELOPERWEBSITE/SKI.gmax

I would use bones animation for the suspension shock just for lowering and raising the ski and not for the actual suspension.

The Maule has a good cfg to use for setting up the contact points.
 
Last edited:
Bill-Just a thought....What about adding a wheel contact point at the tips of the skis? Have the suspension loose so that it hangs correctly, and once on the ground follow the contour. Make the contact point wheel a smaller diameter so it does not affect the main wheels in ground handling....Was just a thought...
 
Would the "functionality" not be similar to the main gear on a 747. They hang nose up until touchdown.
 
The difference between a 747 and a DHC-2 is the Beaver is a taildragger, so not only does the ski need to move up and down, it also needs to pivot fore and aft. A tricky problem and I think you'll need some code to animate the pivoting while taking into account being on the ground.
 
Hence why I suggested making the extra contact points have a very loose suspension.
 
From pictures it looks like the back, flat part of each main ski is aligned with the bottom of the tail wheel ski and the front is curved up like your average ski.
In a three point landing the nose-up attitude will cause the main support surface of the ski to be parallel with the snow.
In flight the curved front part will be sort of aligned with the airflow to minimize drag.
Nice picture on Airliners.net 2714598.jpg
Roy
 
Pivot animation:
Derive a formula that tracks deviation from the standard pitch angle on the ground and compensates the ski orientation accordingly. Also take aircraft weight into account.
 
The difference between a 747 and a DHC-2 is the Beaver is a taildragger, so not only does the ski need to move up and down, it also needs to pivot fore and aft. A tricky problem and I think you'll need some code to animate the pivoting while taking into account being on the ground.
Yes, that is precisely what I was considering. The skis must pivot fore/aft similar to the wheels on a large aircraft. The problem being I don't know how that is done either! :laughing:
 
Yes, that is precisely what I was considering. The skis must pivot fore/aft similar to the wheels on a large aircraft. The problem being I don't know how that is done either! :laughing:

Check any FSX native model of a 747, 767, A330, etc... in ModelConverterX to see how it was done by the original author.
 
Although I have managed to get the skis to rotate, unfortunately my bone-skinned animations are not working in the sim for some odd reason. :(
 
Ezekiel connected dem dry bones,
Ezekiel connected dem dry bones,
Ezekiel in the Valley of Dry Bones,
Now hear the word of the Lord.
 
The difference between a 747 and a DHC-2 is the Beaver is a taildragger, so not only does the ski need to move up and down, it also needs to pivot fore and aft. A tricky problem and I think you'll need some code to animate the pivoting while taking into account being on the ground.

At first I was going to post for rotation for the aircraft position. But there might not be any rotation as the ski has a bent shape. I noticed the shape of the ski is designed to sit at the angle when the taildragger is parked. And the nose of the ski is sloped for take off and landing. I noticed the Maule also used no rotation as well. I think it has a small amount of rotation which is actually the ski suspension and the ski is designed to be static with a small amount of suspension. So i would not animate this.
 
Last edited:
If in doubt consult the pilot"s manual
http://www.austingwatson.com/yahoo_site_admin1/assets/docs/DHC-2-Beaver-POH.128151001.pdf
Section 6 (page 75 onwards) deals with skis and floats.
The skis are raised to expose the wheels for taxying on tarmac and lowered to cover the wheels so that the skis can be used on snow. The mechanism is hydraulic operated by a hand pump.
Looks like the pitch attitude of the skies is maintained by bungees fore and aft.
Roy
 
Thanks to everyone for their comments and hints, especially Roy for the POH link, and AuMav for the FFDS links. I now have an "action plan."

Just as I was drifting off to sleep late last night, the cause of my non-animating skin-bones floated up into my conscious mind. I'd totally forgotten to set the FSX Material for "skinned mesh."

That's what happens whenever you only deal with a specialized subject one or two times a year... :confused:
 
Back
Top