• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Annotator-Not responding

Messages
454
Country
wales
This is a guess a technical question but as it is the subject I am asking it here.

One problem I have come up against is the very slow response of the annotator when loading an aerial image (Gen X) and then zooming and panning.

I very frequently get the dreaded "Not Responding" message appear.

I have shut down everything that I am not using.

I have a 3.2 cpu.

(FSX + Acceleration)

Any thoughts?

Regards

Richard
 
I have resolved this issue.

I was trying to open up the 1.2m bgl's but then changed to the 2.4m bgl's and it seems to work fine now.

Now back to trying to identify which bgl to open??

Regards
 
Hi Richard:

Since (as Dick has explained in one of your other recent posts here in the Autogen sub-forum), the developer can use a proprietary file name for their photoreal imagery BGL, if "those who know the inner workings GenX system" do not release a cross-walk table correlating the default and proprietary file names, one would have to view that BGL in FSX SDK TMFViewer to identify areas visually.

TIP: One can load other scenery components besides just the imagery BGLs (ex: roads, rivers) into a single running TMF viewer "instance" to help get one's bearings; additionally one can note the LAT/LON coordinates as the cursor is moved around to correlate with a live FS flight in the GenX scenery or google maps etc..


I don't think Jim Keir's LWMViewer 1.x or 2.x would be able to identify anything but default legacy format terrain file names, but the screen grab function might be of some help as it creates a geo-reference file for the screenie.


Hope this helps ! :)

GaryGB
 
Last edited:
Hi Gary and thanks.

I not so sure we are not at cross purposes here.

I have no difficulty opening up the Gen X scenery bgl's using either the Viewer or the Annotator.

I can find my locations easily in Google Earth because I have the co ords of them all.

I have also added them all to my FSX using ADE.

I know, approx, where my location is in the country and therefore can work out which volume and Area of Gen X it falls in but there are, what? a 100 different bgl's in each area so which one is it that my airfield situated in?

( I have added scenery including vegetation to 97 so far but of course Instant Scenery (V2) does not have the ability to add vegetation with seasonal changes as you get with the Annotator. You can only add one season or another)

Regards

Richard
 
Hi Richard:

I'm not sure I understand what you are describing. :confused:


In TMFViewer, for example, first I'd load up the FSX default DEM file:

[FSX install path]\Scenery\0501\scenery\dem0501.bgl

(...you can substitute a GenX UK non-default terrain mesh BGL if you own it)



Next I'd load up a single GenX imagery BGL of Edinburg Scotland airport RWY 30 start position (1.2m or 2.4m resolution... your choice).


BTW: For clarity, may we please use a term "imagery" or "photoreal" BGL to distinguish that from the other types of CVX vector BGLs such as Roads, Rivers/Streams etc. ? ;)

Finally, in TMFViewer, "Jump" to: -3.33446592296421 W LON x 55.9436541802509 N LAT


When I move the mouse cursor over the TMFViewer window, if I look at the status bar at the bottom of that window, I see info displayed such as:

"DIR#0501, File#4712" etc.


Do you see that too ? ...or are you instead getting:

"DIR#0501, File#[non-default GenX file name or number]"

If you could answer this first, perhaps that info could clarify the situation better so others here can also try to assist you more.


I hope this might get us closer to a better way of helping you. :)




PS: George's IDTileX version 1.0.0.1 dated 12-17-2006 says the FSX start position of RWY 30 at Edinburg corresponds to:

"V3-24-11753193
Volume3/Area1
"

JimKeir's LWMViewer2 (centered on plane) - "Information" window says:

Cell : 376 x 96
Area : 28 x 27
Point : 80,213
Lat. : N55* 56.65'
Long. : W3* 20.11'
Region : 1 (Europe)
File : ??947120.BGL
Photo : 010331100033122Su.bmp
LClass : 111 (Large City Suburban Non Grid Wet)
WClass : 1 (Shallow Inland, Blue)
Alt. : 11 m


IIRC, these legacy "Photo" file name strings are still a part of the coding used in FSX custom photoreal land class file names.

IIUC, in FS2004, the SDK Autogen Annotator output file name would be: 010331100033122an.agn


Here's another part that Dick (Rhumbaflappy) might be able to answer for us:

If the numeric file naming scheme for custom photoreal land class file names is still "locked" in FSX, where are they used... on the imagery sub-tiles INSIDE the compressed and renamed imagery BGL file (in this case bearing a proprietary GenX "volume" file name) ?


[EDITED]
And where does one find a cross-reference table documenting the correlation of the legacy FS2004 custom photoreal land class numeric file names by "legacy custom LOD13 quad imagery tile number", and the FSX numeric file naming scheme for "custom" *.agn files (ex: by comparison with the "default" new numeric file names as seen in [FSX install path]\Scenery\World\Texture folder) ? :o

[END_EDIT]


NOTE: What I refer to above as "legacy custom LOD13 quad imagery tile number", Dick refers to as "CUSTOM ( photoreal ) texture" in ReadME.txt from the TCalc2004 version 2.0 package for FS2004.

http://library.avsim.net/esearch.php?CatID=fs2004sd&DLID=55467


Thanks for any additional insights posted here to help us better understand this aspect of FSX Custom Land Class and Autogen file naming.

GaryGB
 
Last edited:
Hi Gary,

OK have loaded the demo0501.bgl and see at the bottom of the viewer a Dir and a File.

I cannot load at Edinburgh as I do not have Gen X in Scotland.

Still, when I move my mouse over the viewer the numbers change.

(By the way I have been in touch with George Davidson today and he tells me that he no longer has the original IDTileX and in any case it won't work because Horizon changed the numbering.)

So what's next??

Regards

Richard
 
Hi Richard:

When I move the mouse cursor over the TMFViewer window, if I look at the status bar at the bottom of that window, I see info displayed such as:

"DIR#0501, File#4712" etc. ?


Do you see that too ? ...or are you instead getting:

"DIR#0501, File#[non-default GenX file name or number]"

You said: "when I move my mouse over the viewer the numbers change"; ...what exactly are the numbers you see after "FILE#" ? :confused:


PS: Would a particular RWY start location at Heathrow be within the GenX coverage area you have installed ?

Also, do you still have FS2004 installed, just in case you end up needing it for a heavy-handed work-around?


George: (aka Ananda / GHD/ Golf-HotelDelta): What happened with Genx and IDTileX subsequent to this thread of November 2009:

http://www.visualflight.co.uk/forums/topic.asp?TOPIC_ID=8827

....did you stop updating IDTileX because GenX changed its file names yet AGAIN ?


Thanks for your kind help with this ! ;)


GaryGB
 
Last edited:
Back
Top