• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Any Comments?

Messages
18
Country
us-washington
I've run across something with the vertices I thought Microsoft fixed with the FSX SP2 SDK. This error occured using Max7 with the provided Max7 plugins in the SDK. Any comments or work arounds? {See attached}
 

Attachments

  • 3DS Max error.JPG
    3DS Max error.JPG
    93.7 KB · Views: 770
You have too many texture vertices assigned to the same material! There is a limit of 65k texture vertices per material.

The simple solution is to create a new FSX Material with a very tiny and insignificant change to the "recipie" (such as Reflection=31 versus Reflection=32), and take about half the parts that use the same material, and apply the new FSX Material to them.

The limit you are thinking of is that of polygon vertices, which in FS8/9 are absolutely limited to 65k.
 
Thanks Fr. Bill for the news on changing the texture data. I didnt know you had to do that as well, only to create a new one and 'spread the load'.



Bill
 
Ok, you were right!!! I had to create 7 new materials and divide the parts up and assign each set to a new material, but it finaly compiled!!! You are a lifesaver Sir!!! Thanks!!
 
Just out of interest, what on earth are you modelling!?

I can put a level 2 mesh smooth on my entire project and still not reach 200,000 polys.
 
Let me guess... High poly people made from Poser! That would do it with just two people really quick, lol...
 
Hi there,

I also run into this problem from time to time and it can be really painful to solve it.

What Bill described is a workaround for the problem that - in my opinion - should be used as the last option! Before flooding your texture memory you should really think about what causes this problem. So first off find out how many "physical" vertices are on one material.
IF you have a massive 3D structures and you are indeed exceeding the 65k mark just with the basic geometry, you can use the work-around technique as described above (my Bleriot now has almost 200,000 vertices - so it is really not hard to reach these limitations).

But it also happens that your number of vertices is significantly LOWER than the 65k material-vertice-limit and you still get this error and in that case it is difficult to find the actual problem - but worth it.

I ran into this problem with my Electra. One weekend I decided to redo the R985 engine and after three days work the new model was ready to get exported but I just got the 65k-error message. The first thing I did was to add a new material, as Bill suggested and solely assigned this material to the engine. Export -> same error. The engine itself had just about 5000 vertices and even when I deleted everything EXCEPT the engine, it could not be exported.

So here is what happened: In addition to the "geometry-vertices", the exporter creates additional "uvw-map-vertices". If you don't map your parts wisely, the amount of additional vertices can go nuts. For instance: if you map a part in a way that polygones cross the "border" of the texture map, additional vertices are generated to virtually split up the faces.

So here is the solution: find the part that causes the problem. Check the "physical vertices" of that particular part. If the physical vertices exceed 65k you really should change your modeling style ;)
If not, try remapping the object from scratch and export again.

Still no luck? Either go with Bills workaround, or better: start modeling the part again. In the end, by clone-creating a new material you are unnecessarily using up memory space thus decreasing the performance.

Cheers,
Vitus
 
I found that this error happens when you have too many small detailed parts. I have tried to split them up over 6 different textures and you get the same result. I found that parts like, hooks, bolts, nuts, cable and other small round parts is where you have to budget wisely.

Your parts might total to only 9,000 poly's, but mapping small round parts cost in high vertices. So you can exceed this limit with only a few parts that are over detailed.
 
I do realize how old the post is. There are links that direct here from many other posts. i have been reading this page over the last year! I decided to add info about this error and make it easy to avoid! So i wanted to add more information! If you read this page you will find that everyone has a few different methods.

Happy Developing:D
 
Hey DG,

This is so true on parts and smoothing. If you have a block/cube that is smoothed out over the entire area, it will have 8 Vertices. If you unsmooth it, it will have then 24 Vertices.


So, if you have different smooth sections on a landing gear cylinder with multiple changes in cylinder diameter, and 20 to 30 sides on it, imagine the massive gain in Vertices per that Material....



On a side note, to add to this for future readers on this error, if you create a new Material (click Copy on the Material Editor, rename new material), then you 'must' make that small change Bill Leaming mentions to any setting that you choose, one that will not be visible enough to matter, or the crash will still occur.


Bill
 
Incidentally for those having problems finding the guilty part I've found the easiest thing to do is use the 'select by material' option (or download the script for gMax that does it) and then use 'Export Selected' rather than 'Export'.
It takes a lot of the guesswork out of finding the guilty party, obviously once you've narrowed it down to a specific material you'll need to hunt through the assigned parts...
 
That's why 9,000 poly's hit 64 to 75,000 vertices. It was because i smoothed them at the standard 45. Crap next time on small hooks and rings, I will use 15 or 20 on smoothing level.......Thanks Lionheart!:eek:
 
Back
Top