• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Berliner Joyce OJ-2

Messages
392
Country
us-nevada
Added COP-30 to the Berliner Joyce OJ-2. Problem, when launching it flips nose down, crash. How can I correct it from flipping over?
 
Ahh so....


I would highly suggest emailing Rob and ask him (my humble 2 cents). I don't have the addon, sounds pretty cool, but he would be the one to ask if no one here knows the answer.

Another place you might ask is at Sim Outhouse as there are a lot of WWII people there that would more then likely have this and can walk you through getting it working right.



Bill
 
Berliner Joyce

Oh ya. Beautiful plane. I have both one as the o2 sea plane the other wheeled landing gear which I launch and land off the USS Ranger. Don't know why the sea plane flips over when using the cop30. The other with wheels works with it though not very real, usually just leave the carrier normal.
 
OK , is the OJ-2 just falling nose down off the cat? I know it is hard to catch but can you post a screen shot of it flipping over? Also, your comment about the wheel version just taking off the CV-4 in a "regular way" leads me to believe the catapult gauge may not be installed correctly. I fly the OJ-2 off the CV-4 and it takes off with a real boost from the catapult gauge.

Best, Paul
 
Berliner Joyce

Here's what's happening

joyce.jpg
 
WOW! That's not a good way to start the day. Looks like it stubbed it's toe on something. I have not had that experience in hundreds of catapult launches with several different planes by both me and other developers. The pictures below show the OJ-2 right at the end of the cat and then farther out. It didn't tip over. One thing; notice the little green lights I have circled? These are from the status gauge of COP-30. I notice they are not in any of your screen shots. This indicates that COP-30 is not completely installed on your system. I also took a look at the Idaho model in ModConvX to see if there were any spurious crash boxes around the catapult on my copy. There aren't any.

Paul
 

Attachments

  • Takeoff.jpg
    Takeoff.jpg
    108.6 KB · Views: 608
  • Away.jpg
    Away.jpg
    83.3 KB · Views: 616
Berliner Joyce

PutPut, what you say would be all well and good except, I have the cop30 installed in dozens of aircraft and all work even an F86 will launch from this Idaho. I have not changed anything but add the cop30 to the Joyce. That's why I can't figure it out. However, yours works I can see so I must have done something wrong. I will take another look.
 
Confused

I just don't get it. The Joyce catapult works fine when on the water but when I try from the catapult it flips. All my other aircraft work off the catapult. So now, the COP30 seems to work and the Idaho seems to be ok with everybody but the Joyce but the Joyce catapults from the water. I am open to anything at this point.
 
If the problem is just with the Joyce as you say, it will be in the entries for cop-30 in your Joyce panel .cfg file. I have never attached a zip file in this forum so I don't know if it will work but I am attaching a zip file with the panel.cfg file from my copy of the OJ-2 which works on my system.

Paul
 

Attachments

Joyce

Your .cfg and mine are the same, same outcome. Maybe if I describe it. When I release the brake to launch the cop30 system is activated but the aircraft reacts as if the brakes were still locked. Maybe I need to release something?
 
OK. I believe we can eliminate the airplanes as the problem and concentrate on the catapult and or the Idaho itself. What you describe sounds like the catapult platform is missing or in the wrong place. I originally uploaded the Idaho to flightsim and simviation. If you downloaded it elswhere the file could be corrupt. When you get time send me a screen shot of the Joyce sitting at rest on the catapult before you try to release it. That will show me where the platform is located.

OT: I believe I saw someplace you are in Reno. I graduated from UNR in 1954 with a BS in Mechanical Engineering. The school had only 2500 students in those days. Have not been back since the early 80's. Beautiful country.

Paul
 
Joyce

Maybe, but I didn't get here until 87 anyway, here are a couple pics. One is my Seagull SOC-3. It works great. Same Idaho.
Just don't get it. Haven't changed anything everything should match your setup unless like the auto pilot is on or something hidden like that.

fsscr111.jpg

fsscr112.jpg
 
I want to try one more thing before I call quits to this. I am really out of ideas without access to your system. I really would like to look at your Idaho.bgl file compared to mine in ModConvX and see if there is a crash box that shouldn't be there or something different about the catapult platform. The platform is visible in Modconvx. Just go to Addon Scenery>USS Idaho>scenery> Idaho.bgl. Zip up the .bgl file and send it to me by email.

p.pandj@verizon.net

Best, Paul
 
Idaho

Thanks, You didn't maybe change the contact points in the Joyce did you? Cause all my other aircraft catapult off just fine even my F4 Corsairs and they are tail draggers. I don't know how to attach a zip file here. You could PM me.
 

Attachments

Joyce Catapult

A designer at Flightsim.com reworked the contact points for me and now the Joyce works great. I do thank you for your interest and would still like to know why your models (Idaho and Joyce) worked out of the box and mine did not?

joyce2.jpg

joyce1.jpg
 
Back
Top