• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Black squares ????

Messages
5
Country
southafrica
Hi all. HELP! I'm not a very clued up type with programs, so go easy on me plz. When flying choppers, as soon as I increase power, instead of the usual dust ring aroung the craft, I have black block outlines with wisps of black within, can also be seen when tyres touch the tarmac. Is there any quick fix or some way to sort this out apart from killing and reloading the whole program??? All help appreciated. Magoo
 
Which sim is this and are these default choppers or addons. Could be a video card problem. You might reload the drivers, or get newer ones.

Bob
 
Actually sounds to me like there is a smoke effects file either missing or damaged. I'm not sure what file it would be, perhaps someone with more knowledge on this could tell you the specific file.

-Chris-
 
Hi,

In view of the fact that I have the same problem when the scenery and aircraft are still loading up (black squares where the lights are supposed to be), and as I have an oldfashioned low end video card as well, I think Bob may be right in thinking it is a video card problem.
 
Well the black squares where lites should be is a different problem. Can't remember what the answer is, though. I ran FSX on a P4 256mb agp card system and never had black squares.
The computer now I use as a fax machine is a low end core duo. When it had an old 7950 gt (great card), it ran FS9 great. It could even run FSX not too bad. That card died and as I was low on funds (as usual) I put an 8400 gs in it. Yuck! Doesn't run anything as well.

Bob
 
Tis me again

Hi all and tks for coming back. The program is flt sim x, the graphics card is a nvidia GT 240, abt 2 months old and have just updated the driver. Yes I did download several add-on choppers, it has been suggested to me that one of them could be the culprit, so just now I plan to delete them from the file, restart the pc and see what happens with the default craft - fixed and chopper. Will definitely pop back and let you all know. Tks again Tony
 
Last edited:
No joy

Hi and - no joy. I removed all the add-on fixed and rotor craft files, restarted and tried the default DC3 and the EH101 but the black squares still persist. One of the guys at the club also thinks its a messed up effects file and we'll get together at club on Saturday - see if he or any of the others can shed some light on it / fix it would be preferable. Thanks for your interest and suggestions guys, I really do appreciate it. Tony
 
From my experiences within scenery design:

As cdogg said, it has to do with an effect. It isn't necessarily a missing file, just that it is taking a while for your computer to load the effect. This is most notable in my cases, when you are approaching an airport near dusk and the runway and taxiway lights are on. It takes a second or two for the lights to be visible. Before you see that there are lights, you see hundreds of small black squares.

Hopefully this helps

:twocents:
 
Nearly weekend

Hullo all. As I said above its nearly weekend, that means saturday get together for us simmers, we're having a set up at the SAAF 90th birthday airshow, and one of the long standing club members, has also said effects and lets look in that direction once we're up and running. Will keep you posted - watch this space. Again thanks for the interest and suggestions. Tony
 
Dust rings back!!

Hi all. After some trys at various posibilitys, Rob copied his texture and effects files then pasted them into mine - voila! Black squares gone and dust effects are back. Thanks again for your interest and suggestions - they were much appreciated. Airshow was amazing, 50.000 attended, some real good stuff to see. Michael, Phil 4:13 is mine too. Cheers Tony
 
Rotor clouds

Hi all. After some trys at various posibilitys, Rob copied his texture and effects files then pasted them into mine - voila! Black squares gone and dust effects are back. Thanks again for your interest and suggestions - they were much appreciated. Airshow was amazing, 50.000 attended, some real good stuff to see. Michael, Phil 4:13 is mine too. Cheers Tony

Hello! I eagerly read this thread to find a solution, but the answer was not posted. I have the exact same problem with all aircraft causing black square, blocky, clouds of dust close to ground. ie. On takeoff roll or hovering close to ground in a rotor craft. Does someone out there have the answer to this? I have narrowed it down to a missing effects/texture file issue, for ground effect smoke, but cant find it.. I have corrected the blocky nav lights but not this one. Thanks
 
Last edited:
The answer will be a missing Texture.

The reason there are temporary textures reported in some of the posts above is the lag it takes to load them. The difference here is that these are temporary lags.

No fx file, no effect.

fx file with absent or corrupt texture gives balck squares .... if it is a default effect, then the best option may be to find a friend with an intact Effects\Textures folder and find the missing texture there. (This is likely what has fixed the problem in the post above)
 
thanks

Thanks for the reply hcornea! I unfortunately have no friends! LOL. I tried several changes and eventually ended up having to dump FSX and reinstall it. Thus the reason for the long time to reply. I am happy to report after a frustrating 2 days of rearranging and reinstalling, all is well and my favorites are in their rightful place in the hanger. It needed to be done.
 
Last edited:
Back
Top