• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Can I do it?

Messages
6
Country
unitedstates
So I have read tutorials and the wiki on this site and want to dive in to creating scenery for FSX. I've used MSFS since FS98, but have never designed or created anything except for missions using Flight1's Instant Mission Maker.

I want to upgrade Idaho bush strips for the missions using photoreal ground imagery (nothing too fancy). Can this be done? Can a noob like myself have any success with this? Where would be the best place to start and is there anyone willing to help via TS?

Thanks!
 
One issue you'll run into is that you can't distribute commercial imagery so you'll have to find some public domain imagery to work with. That excludes SBuilderX unfortunately as any imagery downloaded by SBX is commercial to my knowledge, it can be used on your own system for your own enjoyment but you can't distribute it without licensing it.

That means you'll have to download some low-res 1m NAIP imagery or something from the national map server and write .infs to resample it into photoreal yourself. That isn't a huge deal though, there are some example .infs in the "SDK\Environment Kit\Terrain SDK\Resample Examples" folder that you can adapt.

Jim
 
Key to success is recognizing what your learning process consists of.

If you accept that your first effort will look poor compared to what you see posted, but you're going to do it anyway, just for the experience, then some day you'll be producing high class work.

If you consider your first effort a failure if it looks poor, you won't likely ever be successful.
 
If you're doubting yourself from the very beginning on, then you won't.

You sound like my dad Björn :) . He'd always say something to the effect of "You think you can, or you think you can't - either way you're right"
 
You sound like my dad Björn :) . He'd always say something to the effect of "You think you can, or you think you can't - either way you're right"

Well, he is/was a wise man then.

(Kudos on getting the umlaut right, btw.)



If you need a last push: JUST FORKING DO IT!
 
If you have done it before, then no worries. If you haven't and you have enough 'want' to do it, you 'will', no matter what.

:cool:

Just do a project one step at a time. Don't look at the total size of a project, just one thing in it.


Coming here, I'd say you just started it.

Try using check lists on your project. Helps.
 
Thanks for the help and inspiration.

I'm really just needing some direction in the beginning. I'm not wanting to create large areas of photoreal scenery, all I'd like to do is upgrade the strips themselves and place scenery objects.

I'm starting to learn SBuilder, but I've also seen other methods that might do the job just as well. I've got IS3, and Instant Object Studio for scenery objects and placement.

Thanks
 
Thanks for the help and inspiration.

I'm really just needing some direction in the beginning. I'm not wanting to create large areas of photoreal scenery, all I'd like to do is upgrade the strips themselves and place scenery objects.

I'm starting to learn SBuilder, but I've also seen other methods that might do the job just as well. I've got IS3, and Instant Object Studio for scenery objects and placement.

Thanks

Then you are covered. The basics, open SBuilderX, create a new project. Fly your aircraft in FSX to the scenery you want. Go to VIEW - SHOW AIRCRAFT and it will position the map over the area you are flying in. Now zoom into about 14 or so and go to EDIT - PREFERENCES and select the sat imagery provider you want. Now go to VIEW - SHOW BACKGROUND and it will load any imagery that is available. Once you figure out the best zoom/resolution, then go to FILE - ADD MAP - FROM BACKGROUND and a new window will open up. In this window, select the resolution you decided on before and draw a line around the area you want to be created (note, 16 zoom if the default FSX resolution of 1 m/pixel, avoid anything less as it is terrible quality) and then hit OK, it will then tell you about loading tiles, just let it do that till it is done and hit ok again. Once you get the image, select it and then go to the BGL compilation button and compile, done!!
 
Well, I've started a project (S90 - Elk City, ID). I created my background image as well as my blend mask. I'm having trouble editing the original BMP image with GIMP though. If I try to add a layer and edit then try to compile with SBuilder, it will not compile the edited image.

My bigger problem though: Somehow I lost all of my roads and rivers:confused: Not sure what I did. I've got ORBX NRM installed and had created a few bgl's with IS3, but they have been deleted.

Sorry for all the "newbiness" in this post...
 
To edit the image you do the editing in GIMP and then save it as the original otherwise Sbuilder will think it is gone if the original is gone.

as for the roads and rivers, you lose all vector items when you use photoscenery, besides, the photoreal roads are soooooo much better than the vector ones. The only choices to have on top of photoreal are custom ground polys, or do it with the AFCAD.


Elk city, nice choice, I have the photoreal done on that one, never got around to finishing it. best of luck!
 
Maxman, thanks for taking the time to reply and help!

To edit the image you do the editing in GIMP and then save it as the original otherwise Sbuilder will think it is gone if the original is gone.

When I tried, I added a new layer, edited the layer, then chose to overwrite the original. When I load in Sbuilder, I now see the updated image, but when I go to compile, it gives an error.

as for the roads and rivers, you lose all vector items when you use photoscenery, besides, the photoreal roads are soooooo much better than the vector ones. The only choices to have on top of photoreal are custom ground polys, or do it with the AFCAD.

As far as vector data, I've lost all of it! Not just around Elk City:( Something got messed up in the scenery library, but I don't have a clue. ORBX is at a higher priority than everything else.
 
I guess one can't edit an image from google earth without lost some data. this is the issue with any terrain resample works. some step is faulty. I guess.
 
Maxman, thanks for taking the time to reply and help!



When I tried, I added a new layer, edited the layer, then chose to overwrite the original. When I load in Sbuilder, I now see the updated image, but when I go to compile, it gives an error.



As far as vector data, I've lost all of it! Not just around Elk City:( Something got messed up in the scenery library, but I don't have a clue. ORBX is at a higher priority than everything else.


When you go to compile again, don't do it thru Sbuilder, go to the folder where all the photoreal files are stored, then open a new window and find the resample .exe. Now just drag and drop the photo01 setup info file into/on to the resample exe and it will start the compiling. Do this each time to compile. Unless you are going to do any vector data work, your sbuilder time is done for this project, everything else you do with the photoscenery is by hand and the resample .exe.

As for the vector data, nothing you did with the photo scenery should have made it all disappear.
 
I got the vector data back. I also figured out how to edit the image and use it in FSX. I have spent waayyy to much time with SBuilder and FSX today as my head is spinning and hands are hurting. However, as PC illiterate as I am, I think I'm making progress:)

Here is some of what I have accomplished today. I know this will look like a child's crayon drawing to many of you, but I'm that proud child today:D

Spring_zps901682ed.jpg


Winter_zps1cf0929f.jpg


autogen2_zpsbc009f00.jpg


I still have lots of questions and problems though. I'm using the autogen annotator and the autogen changes locations when I change seasons.

Also, after adding summer textures and compiling my scenery, the blend mask won't show up anymore.

Sorry if this thread has gotten out of hand and needs to be moved. But, I do want to thank everyone again for their help and support. I hope that this is just the beginning of scenery design for me.
 
did you fix the problem? BTW- your summer should be your original bmp. Never change that. Use it to do the others and saveas. Your winter, etc looks great. When or if you do night DO NOT add _LM. Instead add _N.

Yes compiling everything in a separate folder with a copy of resample.exe is good to do but not necessary. Always nice to have that on hand. Blend mask has to be same file name with _B and tif file otherwise you will lose it.
night- basically try this...... 1. use original bmp, in Gimp.... 2. create new layer....black... 3. reduce opacity to about 90%. 4. create another layer- yellow. 5. reduce opacity down to about 15%. 6. Go back to black layer, erase tool, circle shape, large..... your choice how large (play with it- you'll see why), and click once or twice or more (how bright you want street lights to be) everywhere you want street lights to show up.

Fun to do. Save as filename_N.bmp In SBX right click side of map - properties, seasons tab, choose 'night', new window shows, choose your new _N texture. compile. If you have learned all this, my apologies for wasting time. Bob
 
Back
Top