1) I was test-exporting my Phantom (P3D SDK) and after doing the checks, I'm getting scale broken errors, with scales of [1,1,1]. I obviously don't get the errors to go away, no matter how I reset the scale (via check window or XForm panel).
2) Another problem is that due to the complexity of the nozzle model, I'm going to get a lot of drawcalls.
Each nozzle consisted of 144 animated parts, multiply by 2 equals 288 draw calls.
Adding 6 fins x 2 wings=12DCs, 3 tail fins, an estimate of 8 parts x 3 gear legs=24DCs, canopies and glass another 4, pilots sticks and levers another 6, so far touching 334 drawcalls and there's more to come (exterior model).
What I want to ask (in order to reduce them):
I've made a skinned version of the nozzle (merged in one part and skinned). Will this count as one drawcall as a single object, despite having 48 bones? That would save me 96 drawcalls from the two engines (and I plan to do it with the other nozzle parts too).
2) Another problem is that due to the complexity of the nozzle model, I'm going to get a lot of drawcalls.
Each nozzle consisted of 144 animated parts, multiply by 2 equals 288 draw calls.
Adding 6 fins x 2 wings=12DCs, 3 tail fins, an estimate of 8 parts x 3 gear legs=24DCs, canopies and glass another 4, pilots sticks and levers another 6, so far touching 334 drawcalls and there's more to come (exterior model).
What I want to ask (in order to reduce them):
I've made a skinned version of the nozzle (merged in one part and skinned). Will this count as one drawcall as a single object, despite having 48 bones? That would save me 96 drawcalls from the two engines (and I plan to do it with the other nozzle parts too).




