• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Classes on learning departments..

Messages
10,163
Country
us-arizona
I can see a use for starting classes.

What if we were to start having basic classes on one single subject at a time.

For instance, what if we started a class on how to make a C++ gauge? What if we started a class on how to make a 'something' that would work with SimConnect?

Over at the big CG sites, they offer classes (online) that show people how to do things. It would be interesting if we could start doing something like this. What do you think?

Would this work with our training siminars that we thinking of doing?


Bill
 
I think Yes, Personally I have an experience of teaching People 3ds max from zero to decent level, not C++. Using Skype and Teamviewer.
I didn't charge people I trained but then I came to conclusion that it is time consuming and little donation towards that would be very appreciated tho.
Some would say "hay there are lot of youtube tutorials", but I can assure that nothing compares with direct one to one course, just out of my experience.
 
Some would say "hay there are lot of youtube tutorials", but I can assure that nothing compares with direct one to one course, just out of my experience.

Of course. A YT tutorial can't answer any questions.
 
I can see a use for starting classes.

What if we were to start having basic classes on one single subject at a time.

For instance, what if we started a class on how to make a C++ gauge? What if we started a class on how to make a 'something' that would work with SimConnect?

Over at the big CG sites, they offer classes (online) that show people how to do things. It would be interesting if we could start doing something like this. What do you think?

Would this work with our training siminars that we thinking of doing?


Bill

Great idea.....:D

Alan
 
Hi,

There was some kind of online FS university a few years ago, but the idea never really came from the ground.

Are you more thinking of video tutorial with the possibility to ask questions and clarifications or more towards real classroom ideas where the "student" doesn't only watch but actively makes something while the "teacher" helps?

For the first the fsdevconf we are working on might help as well.
 
Hey Arno,

The FSDevConf sounds good. We could even have how-to videos and then questions and answers afterwords? Like 'how was this done, how did you do that, why does this work and not that?'

I could do a class on Ambient Occlusion, teaching people how to do it.

Bill
 
Hi Bill,

Yes, that is the idea. Have presentations/how to sessions by experts and in the end the audience can ask their questions (of course only if you attend live, watching the YouTube recording later will miss the interaction).
 
Hi Bill,

Yes, that is the idea. Have presentations/how to sessions by experts and in the end the audience can ask their questions (of course only if you attend live, watching the YouTube recording later will miss the interaction).

Quick question: WHERE would this conference be held? Members here are literally all around the world, so getting there would be a huge journey for the majority of us! :cool:
 
Hi,

Are you more thinking of video tutorial with the possibility to ask questions and clarifications or more towards real classroom ideas where the "student" doesn't only watch but actively makes something while the "teacher" helps?

That is a very good idea.

If we have a video playing side by side of the program that you are teaching that would be good. If it is possible to have a program that stop the video until you get it right the video will pass to the next step. That would be an interactive learning. Watching YT video is not always a good option. Sometime it is too small to see where the video click on and many times it is too fast to catch up.
 
Yes, please.

There is a lot of shop talk that assumes a certain level of knowledge that sometimes makes it more difficult for new folks to get traction. It can be a challenging experience, while serving as a sort of initiation. I know a lot of my own questions inspire thoughts like "Dude, go find a different hobby. Like stamp collecting or bowling."

Having some sort of baseline series would be great. I know there's stuff like that in the WIKI, but they say things like "assumes you know how to make an effects file." (What's an effects file?)

Most of the time, going to the SDK fills in the gaps. Sort of. Occasionally anyway.

We could use the SDKs themselves as a model - teach the baseline stuff in each category to accomplish the tutorials, or similar projects, that come with the SDKs. More or less just telling the "rest of the story".
 
Quick question: WHERE would this conference be held? Members here are literally all around the world, so getting there would be a huge journey for the majority of us! :cool:

Online, so you can attend from your own home. Doing a physical conference would not work, since everybody is everywhere.
 
These are great ideas! i see initially two problems:

1. lessons using what?
a. 3dsMax- wondrful... IF you have it after buying it or have the student copy. Most of us do not have it.
b. GMax- great... if you use it. If you don't it almost seems like you are shunned.
c. Sketch Up- another fine program- but again.... like b above.

2. Knowing or not knowing how to teach.
Everyone one of the fine fellows here knows their business to the upmost. Your knowledge and experience is phenominal to say the least; and everyone is so very helpful.
However, so often the answers we get are so above our heads we are worse off than before we asked. I know I am making enemies, saying all this, and will undoubtedly get some nasty comments in return; such as - well you better go and leaern this or learn that.... etc. And perhaps true. BUT-

having been a teacher for about 20 years and with two university degrees I have found a few things worth note.

Never assume the level of your student. You are the brain surgeon. Your student is probably a first year med student! :) Teach at his level. To do this- find out what his level is.
Teaching elementary ed and also teaching skiing I first find out 'where' my students are in their understanding.
If you can't do the above then assume you are teaching a beginner.

Give the student step by step instructions. If it is too lengthy.... PM the guy or ask if he/she would like to meet on Skype where there is one-on-one interaction and screen-sharing.
Video tutorials are very helpful. Just one fine example is Arno's tutorials for MCX. I am sure there are many others.
I'll end this rant here. ;) To all you brain surgeons..... keep in mind many of us are first year med students. Bob
 
Last edited:
Teaching students...

I taught microelectronic technology in my past and remember looking at a sea of faces, some comprehending, some NOT.

One guy was so intimidated by the subject matter, HE QUIT HIS JOB!!

However, he went into real estate and passed away a millionaire.

R.I.P., Gerry. Glad it worked out for you. You had me worried there for a while.
 
Last edited:
These are great ideas! i see initially two problems:

1. lessons using what?
a. 3dsMax- wondrful... IF you have it after buying it or have the student copy. Most of us do not have it.
b. GMax- great... if you use it. If you don't it almost seems like you are shunned.
c. Sketch Up- another fine program- but again.... like b above.


Not everyone uses the same tools. For those that do, it would be of great importance to them.
 
Back
Top