• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA default 747

if the issue is the same described here
http://fsdeveloper.com/forum/showthread.php?t=425456

then its probably a corrupt file and replacing the default with another default will not fix it as the corruption is most likely an add-on file scenery or aircraft.

Either re-install or repair FSX and see if the problem persist.
If it does its a default file corruption, not just the b747 aircraft corruption. A re-install/repair would be required.

If removing all addon aircraft and scenery fixes it, then its an addon corruption. If thats the case, replace the addons 1 at a time until you find the culprit
 
if the issue is the same described here
http://fsdeveloper.com/forum/showthread.php?t=425456

then its probably a corrupt file and replacing the default with another default will not fix it as the corruption is most likely an add-on file scenery or aircraft.

Either re-install or repair FSX and see if the problem persist.
If it does its a default file corruption, not just the b747 aircraft corruption. A re-install/repair would be required.

If removing all addon aircraft and scenery fixes it, then its an addon corruption. If thats the case, replace the addons 1 at a time until you find the culprit

Have you ever used the Repair FSX without it not working right???
 
Did the repair, when I came in at KMCO the 747 I came in looked like it should, then noticed other 747 were thw white ones again.
I changed the texture on mine and it went to the white. Changed the plane to the 737 looked normal..
I'm lost...:confused::confused::confused:
 
It appears FSX is having problems with the texture.cfg files.

I have seen issues with the user aircraft where if you select the white livery you can't select another livery until you select another model first.

What I would do if I were you is to copy all of the textures from ...\SimObjects\Airplanes\b747-400\texture to all of the other B747 texture folders and do not allow any overwrites.

This should cause FSX to ignore the texture.cfg and hopefully fix your troubles.

cheers,
Lane
 
It appears FSX is having problems with the texture.cfg files.

I have seen issues with the user aircraft where if you select the white livery you can't select another livery until you select another model first.

What I would do if I were you is to copy all of the textures from ...\SimObjects\Airplanes\b747-400\texture to all of the other B747 texture folders and do not allow any overwrites.

This should cause FSX to ignore the texture.cfg and hopefully fix your troubles.

cheers,
Lane
I thought we had it,but it is just something with that 747. I've removed all the others so far.
The texture looked normal when i came in but all the other textures were'nt there...
I guess it looks like a reinstall again....
 
I thought we had it,but it is just something with that 747. I've removed all the others so far.
The texture looked normal when i came in but all the other textures were'nt there...
I guess it looks like a reinstall again....

Reinstall may be your only choice. Its not the model thats the issue. BTW, what SP are you using?
 
OK I did a clean install of FSX on a new HD. I still don't have textures for the 747's, and this is the stock install without any addons....

Now what???? re-install Windows...

I'm beyond cornfused now
 
OK I did a clean install of FSX on a new HD. I still don't have textures for the 747's, and this is the stock install without any addons....

Now what???? re-install Windows...

I'm beyond cornfused now

Try changing hardware settings more and the complexity settings of FSX. Double check DirectX 10 Preview is turned off.
I think you may have your settings set too high for your pc to display correctly.
It could be a corrupt driver but that shouldnt only affect the 747.


For blurred, see this.
http://flyawaysimulation.com/downloads/files/4236/fsx-default-boeing-747-400-blurred-texture-fix/
 
Last edited:
That happens when there's not enough RAM available on the videocard or in the system to support loading all of the textures. It turning white is a fall back texture to reduce load and keep the sim running. Recommend running FSX with all other programs closed or upgrade video card to something with more RAM. I remember the discussion with this with the ACES team. It's designed to work that way.

Out of curiosity what are your video card specs?
 
OK I did a clean install of FSX on a new HD. I still don't have textures for the 747's, and this is the stock install without any addons....

Now what???? re-install Windows...

I'm beyond cornfused now

The default textures would have installed with the aircraft. If they are not showing, change your settings for FSX.

Hollywood,

He has a NVidia card from what I gather in his previous post. He also said he has adjusted the sliders but that they are also maxed.

I still maintain its an overload and I still think he should lower the settings to 'low' for scenery and a/c complexity (Reflections turned off). He should also close Yahoo, or any un-needed program while FSX is running.

Beyond that, between the other threads on this issue he has partaken, we have covered all bases with the exception of hardware replacement.

Checked according to his post:
FSX Complexity Settings
FSX DirectX 10 on/off
Hardware drivers up to date
Repair of FSX
Re-install of FSX






Update:
I just discovered this thread. Anyone encounter issues with Textures related to World of AI?
http://fsdeveloper.com/forum/showthread.php?t=425513

Below are other threads/posts he has made regarding aircraft and modifications. It may shed light on his exact issue.
http://fsdeveloper.com/forum/showthread.php?t=425513

http://fsdeveloper.com/forum/showthread.php?t=425512 (ADE related, not aircraft)

http://fsdeveloper.com/forum/showthread.php?t=425504

http://fsdeveloper.com/forum/showthread.php?t=425456

http://fsdeveloper.com/forum/showthread.php?t=425381
 
Last edited:
The default textures would have installed with the aircraft. If they are not showing, change your settings for FSX.

Hollywood,

He has a NVidia card from what I gather in his previous post. He also said he has adjusted the sliders but that they are also maxed.

I still maintain its an overload and I still think he should lower the settings to 'low' for scenery and a/c complexity (Reflections turned off). He should also close Yahoo, or any un-needed program while FSX is running.

Beyond that, between the other threads on this issue he has partaken, we have covered all bases with the exception of hardware replacement.

Checked according to his post:
FSX Complexity SettingsI have turned all down to 50%
FSX DirectX 10 on/offOFF
Hardware drivers up to dateYes
Repair of FSX
Re-install of FSXReinstall Yes

Nvidia GeForce GTX550Ti
Quad core (someone said could be a problem)
All the ram it will hold

I understand what you say about sliders, but this all worked with what I have now.
And the question is why only the texture for the stock 747's is affected, while all other planes ,buildings,grass everything I see is not changed.
 
Nvidia GeForce GTX550Ti
Quad core (someone said could be a problem)
All the ram it will hold

I understand what you say about sliders, but this all worked with what I have now.
And the question is why only the texture for the stock 747's is affected, while all other planes ,buildings,grass everything I see is not changed.

Hardware could be failing or have a bad file somewhere.
Try it with your sliders less, around 25% for a day or two and see if it still happens. Dont say it doesnt fix it without confirming. We cant help fix it if you assume it wont affect or help.

Texture issues can get funky and Ive seen them cause FSX/FS9/FS2k2, 2k, 98, 95 not run at all. I mean a little 28kb texture file that is corrupt can cause all sorts of issues. Not to say its the textures.
You just confirmed you reinstalled FSX. This would have replaced any damaged texture files with 'clean' textures.

How much machine memory and type?
SDRAM, DDR2, DDR3? Mixed and how much? Your memory could have a bad sector but I doubt it.

Also, you could have all the ram it could hold, but it may only see 1 of the RAM cards or RAM slots.

My older desktop PC has 4 RAM slots but each is limited to 4GB of DDR2 max. If I stick a 4GB DDR2 card in a single slot it either wont recognize it or limit the amount I can use to 1/4 of 4GB. Just because it fits doesnt mean it will work. Think Bicyle tire on a monster truck. It fits but wont work :)

Just an FYI, PCs slow down and perform worse with age, which is why maintenance is performed. Parts become brittle, some oxidized, some frail and frayed. Some overheat some have chared areas.
A processor will still work if it overheats, but if it did overheat you just shortened its life, by how much depends on the length of time it overheated and the temperature. Just because it worked yesterday doesnt mean it will today. Its just laws of time and nature. Even brand new items can be defective or fail on first use.

And the question is why only the texture for the stock 747's is affected, while all other planes ,buildings,grass everything I see is not changed.
Well, a law of nature states warm air rises. Then why is it colder the higher you go?
Also on that, why do temperature inversions exist? How can it be 20 degrees F at the surface but 50 at 6,000ft then back down to 10 at 12,000ft?
It doesnt sound logical, but not all things are logical.
 
Last edited:
Guys I was on the beta for FSX. I can tell you without a doubt that there are no corrupted files, the issue is running out of RAM and FSX falls back to the default white aircraft texture when that happens. This is straight from the ACES team and is designed that way.
 
Last edited:
I'm thinking memory now also as my son had told me this pc had all the RAM it would hold(8gb). I did a Crucial scan and it tells me I can put another 8gb ,as this is a 64bit system.
Any thoughts as you guys talk better computer knowledge than I got....
This is the Crucial sacn info:

Memory Type: DDR3 PC3-10600, DDR3 PC3-12800, DDR3 PC3-14900, DDR3 (non-ECC)
Maximum Memory: 16GB
Currently Installed Memory: 8GB
Total Memory Slots: 4
Available Memory Slots: 2
 
Not much point putting in extra 8gig just for FSX. Make sure you are not overloading the sim with traffic and look around for HIGHMEMFIX tweak, it is supposed to help FSX adress memory better on 64bit systems.
 
Guys I was on the beta for FSX. I can tell you without a doubt that there are no corrupted files, the issue is running out of RAM and FSX falls back to the default white aircraft texture when that happens. This is straight from the ACES team and is designed that way.

Yep. Its what we have been saying. Its the settings on his machine. The possibility of corruption or hardware failure was low, but possible.

Even though you have a 64bit PC and 8 gigs of memory, FSX is a 32bit program and limited to the constraints of a 32bit processor. 64bit programs have the ability to better manage memory usage by operating at better speeds.

The amount of programs you have running in the background probably uses between 1.5 and 3gb of the memory you have installed. you can check this using Task Manager performance tab. If you have only 2 or 3 gigs used, see what it jumps to after starting FSX. If you have 8gig and it rises above 6, you need to close some stuff, as even though you have 8gig, it will be a very slow pc if you actually use the 8 gig or even 7. Think of memory as a box, the deeper the box, the harder it is to reach the bottom, and the more arm-length you need to get there.

I have done some minor testing on this issue before (which is why I have said multiple times that you need to lower your sliders and settings of FSX) and determined that when you have 4gb ddr3 memory, you will revert to white after you reach 2.8gb usage or higher. This is approximate, not exact.

I am willing to bet if you close all the un-necessary programs, your white fall-back issue will probably stop occuring for a little bit, atleast until the remaining open programs occupy additional memory.

If it didnt, and you had a corruption in the files on install, it would have been corrected on the reinstall. A hardware failing/failure may be an issue, but as said before, it is unlikely.

On a side note, I did not use HIGHMEMFIX tweaks. I just lowered my sliders such as boat an automotive complexity levels.
The link to the tweak is below. I might give it a shot myself.
http://forums1.avsim.net/topic/283061-bojotes-fsxcfg-file/
 
Last edited:
I am not one of those .cfg experts, but as I understand it, while FSX itself is a 32bit application, it is compiled so that it may take advantage of 64bit adressing - such that normally, 32bit apps in 32bit systems would never use full 4gigs of addressable memory (since OS needs some, then video RAM needs to be addressed as well), this setting is supposed to allow FS to go to full 4gigs available.
 
I am not one of those .cfg experts, but as I understand it, while FSX itself is a 32bit application, it is compiled so that it may take advantage of 64bit adressing - such that normally, 32bit apps in 32bit systems would never use full 4gigs of addressable memory (since OS needs some, then video RAM needs to be addressed as well), this setting is supposed to allow FS to go to full 4gigs available.

But 4Gb is only available on 64-bit Windows
 
Back
Top