-
Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:
- Tag FS2020 specific questions with the MSFS2020 tag.
- Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
- Questions about aircraft design can be posted in the Aircraft design forum
- Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
- Questions about terrain design can be posted in the FS2020 terrain design forum.
- Questions about SimConnect can be posted in the SimConnect forum.
Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.
By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.
Development Computer Died...
- Thread starter n4gix
- Start date
- Messages
- 1,964
- Country
With uiautomationcore.dll and after a period of settling in, my initially ridiculously unstable (with respect to GMAX and FSX) Windows 8.1 install is now surprisingly much better than my XP system with regards to crashes. Except for PMDG aircraft, which require FSX being run in windowed mode.
I have no idea why it was so bad to begin with. And you can get WIN8.1 to look and act just like Win7 I think, although I never had the latter.
I have no idea why it was so bad to begin with. And you can get WIN8.1 to look and act just like Win7 I think, although I never had the latter.
n4gix
Resource contributor
- Messages
- 11,674
- Country
Yes Shaun, Win8.1 does reportedly work much better now than Win8 did. Yes, there are a number of neat little programs that will make Win8/8.1 look and feel remarkably like Win7. I guess my major gripe is that I shouldn't have to do any of this. Win7 "Classic" should be a user selectable option and not require any third-party stuff to "fix it..."
The other major "gripe" is that if there is a means to STOP a program from running and free up memory, I've yet to find it. There's no "little red x" in the upper right corner to CLOSE the bloody program...
The other major "gripe" is that if there is a means to STOP a program from running and free up memory, I've yet to find it. There's no "little red x" in the upper right corner to CLOSE the bloody program...
n4gix
Resource contributor
- Messages
- 11,674
- Country
I finally got Max2012 installed, re-installed the P3Dv1.4 SDK, the P3Dv2.4 SDK, and configured Max2012 to use the P3Dv2.4 ACES Tools.
I copy/pasted my SendTo shortcuts to the new drive's ..\SendTo folder and edited them to point to the new SDK path(s).
Imagine my utter surprise to find that for some unfathomable reason, they (the SendTo shortcuts) are no longer working if I have the .x and .xanim files in my sim computer's ..\model folder as has been working for years!
After a few HOURS of troubleshooting, I finally figured out that the process is failing because apparently the new computer won't allow me to read/write to my sim machine's drive (access denied). Crap!
I found a 'workaround' by exporting the .x and .xanim files to a folder on my local C: drive...
Tomorrow I have to reinstall Photoshop, and NSIS so I get back to paying work!
I copy/pasted my SendTo shortcuts to the new drive's ..\SendTo folder and edited them to point to the new SDK path(s).
Imagine my utter surprise to find that for some unfathomable reason, they (the SendTo shortcuts) are no longer working if I have the .x and .xanim files in my sim computer's ..\model folder as has been working for years!
After a few HOURS of troubleshooting, I finally figured out that the process is failing because apparently the new computer won't allow me to read/write to my sim machine's drive (access denied). Crap!
I found a 'workaround' by exporting the .x and .xanim files to a folder on my local C: drive...
Tomorrow I have to reinstall Photoshop, and NSIS so I get back to paying work!
- Messages
- 520
- Country
Yeah having the soon to be un-commissioned machine running makes it easier....what Ive done in the past is throw the drive in as a slave then in bios change the boot to d: drive and see how it go's.Unfortunately, not being able to run sysprep on the main hard drive because the host computer cannot boot at all makes this solution a non-starter in this case...
It's a real shame since everything on my dead dev machine was finely-tuned and well set up for quick and easy production of gauges, 3d mesh, graphics artwork and project installers...
...but remain just out of reach due to all of the now missing Registry entries.
The only "Good News" such as there is and what there is of it is that no data was lost. The only immediate effect has been the loss of the ability to use that data, and the "production time" lost!
Its a 50/50 duck shoot but sometimes if the hardware is similar ie intel nivida ect on both machines it normally struggle through...If it ends in a blue screen or wont boot then disconnect the main drive and use the win7 recovery disc on your old drive....only do this once you have all the data off the drive or an image in case it all go's pair shaped
- Messages
- 466
- Country
Wow Bill, unless you're on the Prepar3D beta team, you must be pretty darn good to have a newer version of the SDK than what's actually available.
Heretic
Resource contributor
- Messages
- 6,830
- Country
I sure miss the "good old days" when the OS wasn't "machine bound" and I could have just popped in the old C: drive and kept on driving!
Windows 7 can do that. I've simply transferred my entire Windows partition from my laptop's old HDD onto a new SSD, popped the latter in and just changed out drivers. No complaints, no drawbacks.
Linux is similarly, if not more tolerant.
n4gix
Resource contributor
- Messages
- 11,674
- Country
P3D v2.4 is over. It will be released tomorrow morning.
n4gix
Resource contributor
- Messages
- 11,674
- Country
Yep. I haven't installed the beta release, being far too busy. Just now Chuck reminded me to "share" my (new) C drive with Everyone. That's why I haven't been able to compile .X files from my sim computer. I export across the net from Max2012 because that way I don't have to export/compile and then copy the new .mdl file to the sim machine.
- Messages
- 862
- Country
And you can get win7 to look and act like XP.
I only changed in April this year and it took a while to XP it, even got the desktop background (Bliss).
- Messages
- 1,468
- Country
You can even get XP to look and act like Win7!!
http://www.askvg.com/transform-windows-xp-into-windows-7-without-using-customization-pack/
hairyspin
Resource contributor
- Messages
- 3,253
- Country
Forgive me if that's got me shaking my head in wonder! However, even Win 8.1 can be made to look and act like MS-DOS: just can't think why you'd want to work THAT way.
Happy as a clam with Win7 - and thankful my rig is still working.
- Messages
- 1,468
- Country
I'd prefer DOS to win8.1 any day!
hairyspin
Resource contributor
- Messages
- 3,253
- Country
Editing XML files in the original EDLIN.EXE should be a barrel of laughs.
Allegedly it's still bundled with 32-bit Win8. (shudders...)
Last edited:
- Messages
- 1,749
- Country
Sorry Bill for your loss, at least you could move all your files to a new computer.
n4gix
Resource contributor
- Messages
- 11,674
- Country
Yes at least I have that going for me. In fact, my secondary HD where I store the installer build folders and files is intact as well, and now chugging along splendidly. The only changes needed are all the installer scripts need to have their paths changed from F:\ to D:\...
For the time being, I've also dropped the "dead machine's" main HD into one of my docking station's slots so I have instant reference to any of the files there as I laboriously re-download and install/configure the many, many utility programs I need for my production pipeline.
