• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Fitting two objects together in FSX?

Messages
176
Country
denmark
Is it possible to 'assemble' two separate objects in FSX?

Lets say you have a base cylinder standing upright about 3 feet in height and with a 3 feet diameter across.

You then 'dump' a 'hollow pole' object directly upright onto this base.
This 'hollow pole' object is eg. 10 feet in height AND with a diameter of 3 feet + whatever extra is needed to make fit onto the base eg. 3.01 feet (or into whatever works best).

Both objects should be 'hardened' i guess, like a helipad using MCX.


Thanks
Michael
 
Hi,

I'm not sure if I understand the question. You can place different objects with the XML code at the same location, so that it looks they are one. Is that what you mean?

I am not sure why they should have a platform.
 
Sorry let me try to explain this better.

I want to create two objects a 'base' pole 3 feet high and a hollow cylinder 10 feet in length.

First, I place the 'base' pole on ground somewhere in the FSX World with an object placement tool.
Second, i place the hollow cylinder nearby.

Then i pick up the cylinder with a helicopter as a slingload.

The purpose is now to slide this cylinder directly onto the 'base' pole, so they will fit together, and you will have a vertical cylinder standing 10 feet tall in the FSX world.

Forget i mentioned platform. I just need the two objects not to pass through each other, so some sort of 'hardening' is needed i guess?

Hope this helps.


Michael
 
Hi,

Yes, that makes more sense. I have no experience with sling loads however, so I am afraid I can't help with this any further.
 
Arno,

Slingloads aside, do you think it would be tecnically possible to fit two objects together like this in FSX free flight?



Michael
 
Have a question. what is a sliingload? Is this something that an aircraft can pickup?

are you trynig to set this pole right on top of the base on the ground? If so- you want the pole to SIT on the base and not go through it? i.e. hard surface?

Easy to make a hard surface using parts datadefs / pat names using FSDS. I am sure the other programs like Gmax, and sketch Up, and others have easy ways as well. bob
 
Bob,

Correct, slingload is a payload to be picked up by a helicopter.

I was planning on using SketchUp to create the model and the MCX to make hard surfaces.

I am not sure SketchUp can make hard surfaces on models?


Michael
 
Hmmmm! i haven't the foggiest idea how to make an object that can be picked up by an aircraft. something neat to learn!!!!
Hard surfaces: In FSDS we have something which easily refer to effects.

Two text files. One is called partnames.txt. the other is called partdatadefs.txt

example: partname.............
Light_0001_1
which would refer to the partdatadef ......

Light_0001_1 <?xml version="1.0" encoding="ISO-8859-1" ?> <FSMakeMdlData version="9.0"> <Attachpoint name="Light_0001_1"> <AttachedObject> <Effect effectName="fx_lightObsRedSteady" effectParams=""/> </AttachedObject> </Attachpoint> <Visibility name="general_light"> </Visibility> </FSMakeMdlData>

This partdatadef calls for the effect which you would have in your effects folder in FSX.

for hard surface I would call for Platform_001_01 or something like that which is in part names. This would refer to the partdatadef which calls for the effect.

Actually very easy.

Let's say I made a polygon top surface with a helopad texture on it. I'd copy it as is, but this copy I'd go to (this is in FSDS) current item properties and in the name of the part I'd hit 'browse' then navigate to partnames and choose Platform_00o_01. Hit ok and this would change the namd of that part to Platform...etc. When I compile an dplace the object I now have a hardsurface to which to land.

Not having FSDS this might be useless to you, but I wrote all this in hopes there might be something similar in Sketch Up. I also have MCX but not sure if MCX can do this. Maybe.... I just haven't found out yet if it does. would like to know about making slingloads. Bob
 
Is it possible to 'assemble' two separate objects in FSX?

Lets say you have a base cylinder standing upright about 3 feet in height and with a 3 feet diameter across.

You then 'dump' a 'hollow pole' object directly upright onto this base.
This 'hollow pole' object is eg. 10 feet in height AND with a diameter of 3 feet + whatever extra is needed to make fit onto the base eg. 3.01 feet (or into whatever works best).

Both objects should be 'hardened' i guess, like a helipad using MCX.


Thanks
Michael


Hi Michael
 
Last edited:
Hi,

Slingloads aside, do you think it would be tecnically possible to fit two objects together like this in FSX free flight?

If you make two objects the right size, technically you can fit them in each other. Sure no problem. But normal scenery objects are static, so they are always at the same location. So then fitting makes not that much sense, you could just make one object :).
 
Hi,



If you make two objects the right size, technically you can fit them in each other. Sure no problem. But normal scenery objects are static, so they are always at the same location. So then fitting makes not that much sense, you could just make one object :).

True, but this is to be used for helicopter operations, which could be eg. fitting powerline pylons together, by placing hoistable objects on top of each other.

Michael
 
Last edited:
Back
Top