• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Flaps & Spoilers Problem

Messages
292
Country
unitedkingdom
I have a strange problem with flaps, in FSX they are down when they should be up, so they start off already deployed & when I lower them they retract, I animated them from fully retracted to fully deployed using l_flap_key & r_flap_key respectively. They are shown to work correctly in both Gmax & MCX.

Also, the spoilers which are also set as spoilerons in the aircraft.cfg deploy with every movement of the ailerons, is there some setting that can be used to limit their deployment, it's the first time I've modelled an aircraft with spoilers & spoilerons so it's all new to me.

Oh, just another thing, the n1 animation, the n1_blurred texture is not showing, all I get is either the n1_still or n1_slow fan animation with the blades just twitching back & forth.

I would really appreciate some help.
 
Hi Paul with the flaps animate them opposite of what they are now that will fix that problem. I'm not sure about the other two but ppl here are really good and helpful and will soon reply to your post


Sent from my iPhone using Tapatalk
 
In the aircraft cfg Paul for the spoilerons.. this is from my fs9 one, but I think it is the same in FSX too..

Sure the settings might need a little tweaking, but this should get them working in the correct phases.

[airplane_geometry]

spoiler_limit = 60.000
aileron_to_spoileron_gain = 4.600
spoiler_handle_available = 1
min_ailerons_for_spoilerons = 10.000
min_flaps_for_spoilerons = 0.35
spoilerons_available =1

Greg
 
In the aircraft cfg Paul for the spoilerons.. this is from my fs9 one, but I think it is the same in FSX too..

Sure the settings might need a little tweaking, but this should get them working in the correct phases.

[airplane_geometry]

spoiler_limit = 60.000
aileron_to_spoileron_gain = 4.600
spoiler_handle_available = 1
min_ailerons_for_spoilerons = 10.000
min_flaps_for_spoilerons = 0.35
spoilerons_available =1

Greg

Does the [FLAPS] section of your aircraft.cfg have its entries listed backwards? I've never had this problem but it's possible that you could have flaps.0 as the fully extended setting, with the rest of them in ascending order.
 
Thank's ozzman for the suggestion, I just checked the flaps section of the aircraft.cfg & all looks fine:
flaps-position.0 = 0
flaps-position.1 = 8
flaps-position.2 = 20
flaps-position.3 = 40

I have never had any problems with the flaps on any of my previous models, I am going to try tagging them in the animation manager as x_flap_percent_key instead of x_flap_key, probably won't make any difference though but worth a try.
 
Thank's ozzman for the suggestion, I just checked the flaps section of the aircraft.cfg & all looks fine:
flaps-position.0 = 0
flaps-position.1 = 8
flaps-position.2 = 20
flaps-position.3 = 40

I have never had any problems with the flaps on any of my previous models, I am going to try tagging them in the animation manager as x_flap_percent_key instead of x_flap_key, probably won't make any difference though but worth a try.

"x_flap_percent_key" is what I've always used, so that must be why I've never had this issue. Try the percent variant and it should display OK.
 
Changing the animation tag to x_flap_percent_key fixed the flap problem.

It appears that the n1 animation is completly messed up, with the engines shut down I see the fan blades & the hub of the n1 blurred & on start-up I see the same but with them twitching back & forth, the same when engines are fully spooled up.
I have keyframe animated all the n1 parts 0-100 @ 0-25-75 & 100 rotating 90,180,-90,0 degrees.

Thank's Greg for the info on the spoilerons, I have fixed that now.
 
What animation variable are you using for your fans? If prop variables, then those do move back and forth as you change the throttle, simulating the stroboscopic look in films.
 
Hi Tom

I have 3 seperate n1 assemblies, n1_still consists of hub, fan blades & other details, n1_slow is a clone of n1_still, n1_blurred is just a hub & a disc with the blurred fan blades image textured onto it. They have all been animated as described before & have tagged the parts in the animation manager as n1_0_still, n1_0_slow & n1_0_blurred for engine 1 & n1_1_still, n1_1_slow & n1_1_blurred for engine 2, the only parts that show in FSX with engines running or not are the fan blades from either n1_still or n1_slow & the less detailed blurred hub, on engine start the blades don't even rotate, they just twitch back & forth.
 
Have you keyframed the fans with at least 4 keyframes? If as stated above, you also need a keyframe at 50.
 
Yes, I have keys at 50, sorry I made an error in the previous statement, this is what it should have stated, key 0 start (0),25 (+90),50 (+180),75 (-90) & 100 (0) end, in brackets are the degrees rotated.
 
Did you use the Attachpoint Tool to tag the objects with the <Visibility> conditions? If not, you will see all of 'em at the same time!
 
Yes, all linear animation controllers.

Thank's Bill, that's probably it, I have not attached any visibilty tags, I will try that.
 
Thank you so much Bill, that fixed the problem:) a silly error. All the issues I had in this thread have been fixed, thank you to all who contributed.
 
Back
Top