• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Float "water rudders"???

n4gix

Resource contributor
Messages
11,674
Country
unitedstates
I've never done a "float" aircraft before. I'm not able to get the water rudders to work. They animated with the rudder pedals, but won't "turn" the aircraft.

I've set up the contact points for the floats and rudders. It floats well, but won't steer.

Code:
[contact_points]
max_number_of_points = 21
 
point.0 = 4,   0.00,  4.80, -8.00, 2200, 0, 0,  0.0, 0.0, 2.5, 0.390, 0.0, 0.0, 3, 0, 0
point.1 = 4,   0.00, -4.80, -8.00, 2200, 0, 0,  0.0, 0.5, 2.5, 0.891, 0.0, 0.0, 2, 0, 0
point.2 = 4, -18.10,  4.80, -7.60, 2200, 0, 0,  0.0, 0.5, 2.5, 0.891, 0.0, 0.0, 3, 0, 0
point.3 = 4, -18.10, -4.80, -7.60, 2200, 0, 0,  0.0, 0.5, 2.5, 0.891, 0.0, 0.0, 2, 0, 0
point.4 = 5, -20.10, -4.80, -7.30, 1600, 0, 0, 50.0, 0.0, 0.0, 1.000, 1.0, 1.2, 0, 0, 0
point.5 = 5, -20.10,  4.80, -7.30, 1600, 0, 0, 50.0, 0.0, 0.0, 1.000, 1.1, 1.5, 0, 0, 0
point.6 = 1,  0.616, -4.80, -9.2, 1600, 0, 0.716, 32, 0.35, 1.5, 0.45, 3.0, 5.0, 0, 152, 180
point.7 = 1,  0.616,  4.80, -9.2, 1600, 0, 0.716, 32, 0.35, 1.5, 0.45, 3.0, 5.0, 0, 152, 180
point.8 = 1, -9.802, -4.80, -9.2, 1600, 1, 0.937,  0, 0.20, 3.0, 0.95, 4.1, 4.3, 2, 152, 200
point.9 = 1, -9.802,  4.80, -9.2, 1600, 2, 0.937,  0, 0.20, 3.0, 0.95, 4.3, 4.1, 3, 152, 200
 
 
gear_system_type=0
static_pitch=1.6               //degrees, pitch when at rest on the ground (+=Up, -=Dn)
static_cg_height=7.4           //feet, altitude of CG when at rest on the ground
 
I can't see anything wrong with the contact points. They look more or less as on the C208. Have you tried using the key combination for raising/lowering the rudders and then testing the functionality?
 
I have never used contact point 5 but I have only worked with an amphibious model. AFAIK contact point 5 is there just for attaching an effect. I can't find anything else on water rudders in the SDK. Steering at low speed has not been a problem but that may be because I have wheel contact points. You might give that a try. Sorry I couldn't be of more help.
 
I would try to change the -7.30 depth value to a more negative number? On the Caravan the scrape point for the back of the float is -4.8 and the water rudder is -7.3. The back of your float is at -7.6 and your water rudder is up in the air at -7.3.

Hope this helps,
 
Maybe a stupid remark but have you assigned a key to the rudder in the settings like Heretic said ?
 
Last edited:
Okay, Ctrl-W is only used to raise/lower the water rudders. The floats on this Beaver are fixed and do not raise/lower. They are tagged with the rudder for animation purposes.

On my way to the VA Hospital's ER this morning* it occurred to me that perhaps they are not actually in the water. I'll try lowering them!

*OT: A few days ago I found a huge "lump" in my right groin area about the size of a robin's egg. My initial panic was "hernia" so I went to the VA Hospital ER in Chicago this morning. Thank God it turned out to be only an unusually large abcess, and a pair of surgeons came down to the ER and cut a 'door' in the middle to drain it, then packed it with sterile gauze to act as a wick and keep it dry. Whew!
 
Thanks, Tom. I'm floating rather "high" taking my pain meds at the moment. So work is progressing a bit slowly for now. I keep falling asleep over the keyboard, which while in Max is very, very dangerous! LOL! :rotfl:
 
I'm floating rather "high"...

That's the problem with contact points Bill, lol! Of course I'm pretty sure now what you're working on, which is a surprise: I thought something else might have landed with a thud on your desktop, rather than this splash. Glad to hear an abcess was "all" the trouble, nasty things hernias.
 
A hernia would not have been the first thing to cross my mind, a hernia I could live with, actually I do, a double. Very happy it wasn't anything serious Bill.

Linguine and scallops with Alfredo sauce and a pain pill, finish with a single malt scotch on the rocks and a good book, good night lights out.
 
[SOLVED] It's amazing how much difference it makes when the water rudders are actually in the water! :laughing:
 
A hernia would not have been the first thing to cross my mind, a hernia I could live with, actually I do, a double. Very happy it wasn't anything serious Bill.

Linguine and scallops with Alfredo sauce and a pain pill, finish with a single malt scotch on the rocks and a good book, good night lights out.
My late father had double hernias and wore a truss for the last eleven years of his life. On the other hand, hernias that wind up getting strangulated (no or low blood flow) can die in less than six hours. Enough so that it can lead to very serious and invasive surgery to repair.

Although not stated, I personally believe that this was truly more along the line of a "friction blister" caused by my "thunder thighs" and fat belly rubbing together... :confused:
 
Bill,

From what I read, you may have to uv map your avatar a bit to have your recent proportions right:).
 
Last edited:
Bill,

From what I read, you may have to uv map your avatar a bit to have your recent proportions right:).
Oh, my proportions are just right. It's just not so noticeable wearing my black clericals, and when you aren't seeing my profile! :rotfl:
 
Back
Top