• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Gmax Adjustable Gizmo suddenly missing

Messages
10,163
Country
us-arizona
Hey all,

In Gmax, the spinning Gizmo (when in Gizmo only mode, for adjusting a parts axis), has suddenly gone missing.

Anyone know how to bring it back? I have no idea what its even called. This is 'not' the normal gizmo, this is the one that has like a box structure to it.


Many thanks for any help.



Bill
 
Hey Bill,

Man, I rushed in and tried that, and found that it only makes the Gizmo disappear and leaves the yellowish gold basic Giz. What I need to appear is the 3D box like version of the Gizmo like when you are turning the Gizmo axis on a door that is off-axis with the plane and needs its hinge point altered.

But...... When I did Control-X, (pro mode), the box Gizmo appeared for a moment, but if I moved it, it disappeared. This happens alot in the past, and just started with this model. I had rebooted the computer to see if it would reappear. Its almost like a Graphics card issue.

So, I painstakingly set their, moving a bit, hitting Control-X, repeat, until I had adjusted the Giz angle in 2 views to where it was properly adjusted.

What a hassle. I wish I knew what the deal was. Perhaps too many 2048 sized PSD textures and they are knocking out the resolution power or something. Who knows....

Thanks for the tip though. It lead me closer to it and at least allowed me to get the darn thing adjusted.


Bill
 
Do you mean the gizmo seen when adjusting pivot under "Affect Pivot Only"? You could use the Transform Gizmo under Local reference coordinate system, but what's making the pivot's gizmo disappear I couldn't say, sorry!
 
As odd as this sounds, try pressing your F2, F3 and F4 keys in random succession a couple of times.

That's assuming your F keys are default.
 
... then shake your fist in the air, and cry out to the deity of your choice.

:D

Suddenly a lightning bolt rips through the atmosphere, through the frail roof and Zotts' the little developer in his chair, converting him into a neatly fried crisp resembling textured steak flavoured charcoal...
 
Hey Gorlosky,

Thanks for the heads up, but nope, thats not it. The regular Gizmo shows up, and its ticked on, but the 'adjustable version with squared arms for when you adjust the Gizmo itself' is the one that doesnt show up. Sometimes it blinks on for a second, then disappears. I fear its a graphics card/memory issue as its trying to work, but disappears if I move the mouse.



Bill
 
If it's a graphics problem, how about disabling textures in the Viewport Configuration? At least temporarily...
 
I tried in Wireframes mode, but that made no difference.

Thanks for the idea.

I could go through all the Materials and turn off their visibility (blue and white checkered button) and see if that does it. Thats an idea.

Having that Gizmo form is really needed when aligning doors and control surfaces pivot axis points..


Bill
 
If you right-click on each viewport window's title and select Configure... you can tick Disable Textures.

Additionally, although the pivot gizmo may be elusive, setting Reference Coordinate System (on the toolbar) to Local will lock the ordinary transform gizmo to the pivot's orientation and position for as long as you have Affect Pivot Only selected. This would give you a work-around until someone gets to the bottom of this, or you reinstall gmax....:eek:
 
I was wondering whether it would help (prior to doing a reinstall) to replace the gmax.ini by a backup if you have one. If you don't I could send you mine (based on a standard c:\gmax setup). If this should do the trick you could cut and paste your custom settings back in place. Let me know.
 
Another thought - does the pivot gizmo show properly when working with a simple file, like a single box or cylinder? If it does, your problem may well be a graphics problem related to your project's gmax file.

If the pivot gizmo still doesn't show, it seems likely to be a gmax problem. Other than that....... new video driver/card?? :confused:

edit: I see from another thread this problem cropped up about a year ago. What was the answer last time - or was there one?
 
Last edited:
Got it....

Shift / G

Thank the Lord.

I had tried many things, including the drivers, which then rendered Gmax unable to start. I found a TXT in the main Gmax folder, emergency startup for Gmax with the Start / Run menu, gmax -h command in DOS.


What an afternoon and a last couple of years.

Bill
 
Back
Top