• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Guam FSX...

Messages
1,061
Country
unitedstates
Well Jim Dhaenens and I have been tinkering around with Guam for a couple of days and I'm thankful Jim has shown the way in Vector based scenery design and now I'm hooked...

Together we've been able to turn the bare, poorly laid out island of Guam in FSX into something that is actually recognizable as Guam...

Screenies follow...

(Note: Photoscenery shot is only placeholder and is a demo, hoping to find public domain data or purchase some commercial imagery but for now the shot was only to test the accuracy of the vector data)

P.S. it's freeware under a creative commons license
 
Last edited:
I did Guam and its three airfields the other day using SBX and VE.
 
Last edited:
Is this to be released soon? Freeware or otherwise?

Will be released soon and it'll be freeware under a creative commons license (i.e. the vector based scenery).

If I do release a photoscenery version, it'll be a freebie if I can get public domain data from the GIS dept here otherwise it'd be like $5 to cover the cost of obtaining the commercial imagery from Digital Globe which I'm estimating should cost about $800-1000 USD... That way we can continue to make sure the stuff we release is all properly licensed.

I have a few other vector scenery surprises soon as well, but it's something I have to do while commercial products are rendering... Good thing is during rendering I have a few compute cycles free for mini freeware projects like this one...
 
Last edited:
It looks good though, and I understand on the personal use thang...

Hopefully we can get a license for the imagery so others can use the datasets as well...

I'm trying to work on freeway traffic shortly, but have to solve a few issues with it if you want to add it...

I've also got a population map I made for the island so you can see boating off shore and road traffic once the freeway data is completed...
 
sure, if you want to give it a go...

i'll attach the population map so the living world stuff shows up...

Edit: I tried to attach the 10m NED DEM BGL but it's too big to attach here. Would you be interested in adding your AFCAD's/AFX's to the project? If you did then I can do the airport plateau fixes much faster...
 
Last edited:
I attach the flattens which were calculated from the default mesh.
 
Last edited:
I'll actually be blending the flattens into the 10m mesh, but I need to trace the airport boundary fence line to make that happen... I can trace most of it by probably going out and walking the fenceline, but I should get clearance from airport security first...
 
Hi,

Looks very nice. Do you have plans to actually model the airports as well? Or are you just focusing on the terrain?
 
At this point I'm not sure what Jim has planned, if he is planning on modeling the airport terminals, I need to get in contact with the airport and just make sure DHS knows what we're doing and see if I can get airside also for some photos...

Personally last time I tried modeling was back in the days of FSDS2 with tiny polygon limits :D I still haven't had time to learn GMAX although I could probably model in Lightwave and port it over... But I'm more hoping someone who wants to model it would be able to take it on... If there were oblique aerial images it'd be a cinch to do, I'll look and see if there's anything available at Sanborn but my guess is quite likely not...

This is a great airport to do work on as I'm literally 250m from the approach strobes for Runway 06R and with 3 new friends who are all pilots with continental I may just be able to get airside once I get clearance...

So simple answer is the airport modeling is hoped to happen, if someone wants to tackle it then welcome to join in on the effort, if not, over time I'll get the tools and resources to be able to build the 3d models...

Cheers,
Dean.

Post Script: Also due to the nature of the source vector data, being creative commons share alike, what I'd like to do eventually is start building a creative commons project for FSX for roads and coastlines in FSX using the same datasets as a base... I'm not sure how to structure it in terms of crowd sourcing but I think it'd be something that done right could really make a huge difference to FSX as well as future sims... i.e. people who have local knowledge of their area can download the source KML data, tweak it and re-upload it for approval, people then can either download the bgl's compiled or download the source KML and then compile at their end...
 
Last edited:
I don't know if there are any formal plans to model the airports. Dean lives there now, right beside the airport, and I was stationed there at Apra Harbor in 1987 through 1990.

Someone posted that it would be nice to have a realistic Guam...Dean got the vector data, and I translated that into landclass. It's only been three days...:) who knows where we're going from here?

Unfortunately, I don't remember enough to model from memory, so we're at the mercy of others.

Jim
 
Last edited:
Yeah Jim's work on this has been fantastic, and my work has only been probably 2 hours all up here and there, and it looks amazing, I just got the new update from Jim with the beaches and she looks amazing!!!

P.S. this is some of the prep work I did today while out hiking to the realtor... http://www.everytrail.com/view_trip.php?trip_id=606901 Thought it'd be easier just to walk around the perimeter to set the area for the airport flatten polygon and burn/blend that flatten into the 10m dem...

Dean.
 
Dean, Jim,

let me know if you're interested in me helping to model the airport. Never been there, but have always been intrigued by it.
 
Here's a few good airport photos to whet your appetites... :-) Very appealing airport...

http://www.airliners.net/photo//1230758/L/
http://www.airliners.net/photo//0540809/L/
http://www.airliners.net/photo//1191027/L/ <- note all the zigzag streets down bottom left, those are all airport property now and mostly gone, except for the houses beside the western road before the 'cliffs'
http://www.airliners.net/photo/Asia-Pacific-Airlines/Boeing-727-212-Adv(F)/0982212/L/ <- these guys are still here, this morning two were parked on the apron
http://www.airliners.net/photo/Continental-Connection-(Cape/ATR-ATR-42-320/0944077/L/ <- Continental is still flying these, haven't had a chance to see if the connection text has been removed or not...

A few other things of note... Construction on what looks like an extension of Runway 06L is in progress and the runway is currently closed, all traffic is now using 06R primarily.... A new approach lighting system has been installed for 06R since this photo & the Bing maps (circa 2005)...
 
Hi Dean,

I have created freeway traffic for part of Route 1 (see attached). Let me know whether it fits your photo scenery.

I didn't realise that it was rush hour :eek:

 
Last edited:
yum!

and a threeholer!

yum yum!

Just had a second breakfast, but still hungry.

My favourite bird is still DF's 727 and Guam has always been a favourable stopover on trips over the big water.
 
Back
Top