• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

I am rusty and need help!!

Messages
829
Country
unitedstates
Hey all, I used to make aircraft for Flight Simulator. I got fairly good at it and made many for my own personal use, never releasing any publicly because most of them were fantasies out of my owns inspiration. So then I got caught up with some life issues, started playing some games on Steam and I never touched gmax, not in years. Everything I learned how to do is almost just a blur.

I have decided to start on a project again for Flight Simulator, this time a real aircraft that exists but I don't know, I feel lost. I taught myself to model using splines. I can create splines, use cross-section and then throw a surface on it and I would get good results ... I made many fuselages and aircraft noses this way and my results were always good but for this particular aircraft I am making, this technique does not seem to be working.

24xqil3.png


That right there is a preview so far, note that I have not said the name of the aircraft in hopes that you would identify it, if someone can then at least that means I'm on the right track, hopefully.

I've been working on this using photographs using one main spline section, mirrored across different locations in gmax to scale with other photographs in the viewports ... that means that anything I do in one location reflects back at the source spline which is kind of nifty ... I just make sure I name the source spline LineXX_source, etc because FS doesn't like things you mirror with the mirror tool on the toolbar, I know to use the mirror modifier when I am satisfied with my work.

I think the nose looks wrong and I have tons of photographs and 3 views for this aircraft and I just can't seem to get that damn nose correctly. IF anyone can offer any type of support, thanks.
 
Last edited:
Not much feedback (but only 2 hours between posts)

Sounds like it was 2 hours well spent on your part though.

My scenery "eye" couldn't see exactly what was happening with the mesh on the radome ... but if it's sorted ... then all good.

Sounds like you are back into it.
 
Are you building the space shuttle?

That's my guess.

The nose can tricky compared to the fuselage. i figure to build that first, then create the nose from the line tool on a photo background.

Your always welcome on usa flight club ts3. We have a few developers there and we help each other. http://www.usaflightclub.com/

DG!
 
Last edited:
DC-8? That caved-in nose ...

Cross-sectioning is okay, but everything has to align with the fairly regular straight fuse section later on. So why not start out with a cylinder (32 sided at least), and then massage the vertices to conform to your cockpit windows layout and nose shape. That should give you fairly regular-spaced rectangles and smooth surfaces without shading errors.

Remember that you can happily do one half of the fuselage only and then create the other half by mirroring.
 
DC-8? That caved-in nose ...

Cross-sectioning is okay, but everything has to align with the fairly regular straight fuse section later on. So why not start out with a cylinder (32 sided at least), and then massage the vertices to conform to your cockpit windows layout and nose shape. That should give you fairly regular-spaced rectangles and smooth surfaces without shading errors.

Remember that you can happily do one half of the fuselage only and then create the other half by mirroring.

The fuselage is my next step but I need to get the shape just right, I have the required guides for that.

2qnm4qt.png


No, it is not a space shuttle and yes it is a DC-8.

I'll create the outline of the fuselage after this and begin bringing it up to the nose area, then I'll just continue spline modeling around the area until it starts to shape up, I'll let you guys know how it turns out but I am making very slow progress with this.
 
Man, that is some sweet modelling with Splines. Can you show a Mesh view of the work that is skinned?

I love working in Splines, but have never done the windows and sections 'alone' in Splines. That is one nice looking technique.
 
Man, that is some sweet modelling with Splines. Can you show a Mesh view of the work that is skinned?

I love working in Splines, but have never done the windows and sections 'alone' in Splines. That is one nice looking technique.

izsyfl.png


Thanks lionheart, I love splines too. You can bend them any way you like and throw a surface on them and work slowly on them till you are satisfied. Many people start out with a cylinder but a cylinder is already created and skinned.

I have done complete noses before just spline modeling patches here and there and skinning them and achieving really nice shading results, of course the mesh always has to be in line with the rest of the sections but that can be worked out overtime.
 
Really good spline work. I have been trying to get started on that kind of work but I Just can figure out how to get into it.

If you dont mind me asking. How do you set up the Guides or drawings to start making the splines off.
 
I only recently found out how to create/convert Vertices into Bezier adjustable arc' controllers. It opened many doors for me, including using Splines as adjustment guides (french curves) for aligning Vertices up with on a fuselage or some liquid/organic/flowing shape.


Love it...!


If you dont mind me asking. How do you set up the Guides or drawings to start making the splines off.

Liberty1


Liberty1,

You can easily setup 'exactly square' polygons and apply an 'exactly square' texture to it that uses the 3-View of a plane. Once you measure the wingspan on the Polygon to ensure it is the proper side, then clone (hold down Shift key and drag out a copy with Move tool selected) and make a flip side for Right (from left), then make back and front copies, and then top and bottom. If you move them far away, they never interfere with 3-d mode work. They are in perfect view though when in side views, top/bottom, etc. Hide them when they are not needed, delete when no longer required.

Just note to make a copy of your 3-View, and rename it, then increase its paper size (outside dimension) to be equal to height and width. So if its 1024 by 540 pixels, reset the size of the document (dont stretch it) to 1024 pixels, or what ever size is the largest, so that it is square. This way, when you apply it to a perfectly square Polygon in Gmax or FSDS, it is not 'squashed' (distorted). Use measure tape (in Gmax) to set the wingspan scale (size of polygon for scale of the model).

Next, make a semi transparent 'box' that is the height, width, and length of the plane. Set that in the middle of the screen, and then align the drawings (sides, top/bottom/front/rear) to that box. Being able to see through the alignment box helps you to move the backdrop polygons around.


This is 'one' way to do it. Several ways are out there. This way, (above) allows you to use the same 3-View for 'all' Polygons. Just move the polygons around for the view angles you are needing. Use Mirror to flip left version to the right so its facing the right way...




Bill








Bill
 
Oh wow, I've been using splines for a very long time. The anchor points you talk about are the key. With a Bezier Corner you can adjust the curvature individually on both sides and then you can set the density of the curvature by increasing the interpolation ... I use the same technique you use, using splines as guides.

When I'm building a cross section, the cross section modifier only connects vertices that are in parallel with the spline work, so to create more, I create a french curve as you call it and then I use refine on the source spline to click at the intersections giving me some really nice work.

I just find it so much easier to work with splines, it may take longer to setup the entire model made completely out of a spline skeleton but when you start skinning it, ah that's worth the time and effort put together.
 
Lionheart


I see I tried looking at your tutorial and started doing it when I started making my CRJ I managed to get the outline of the fuselage and then I was and then I was going to do the individual splines for the height off the aircraft but then I got stucked cause i really did not understand what else I needed to do.


To be clear I have to make copies of the body in example on a left body. Or only on the the front to back body.

I just finished the basic shape for the wing using splines so it is starting to come clear. But I am still lost with the whole concept. I would indeed like to continue to learn this technique since it gives a much more accurate and a higher quality finish
 
I learned the technique from FSEdge. I bought a DVD-ROM from him "FS Alpha Design Group" that's whats on the cover.

Here is a little something I did quickly to show an example.

513rcl.png


First I created a a line, turned the corners to bezier corners and adjusted the curvature, then I created some guide lanes for the shape I was interested in, I then cloned several copies of the line that looks like an airfoil as you see on the picture and scaled them accordingly.

After that I attached them all, added the cross-section modifier and then threw a surface on it using surface modifier, the result was as I expected, I did however, increase the interpolation to 11 on this one so it yielded a lot of polygons .... you can avoid this by working with the cross-section modifier adding vertices manually at key locations to create your own mesh work that you can skin instead of letting surface skin it for you, it takes a while but once it is done, the results are satisfying.

The smooth modifier at the top of the stack got rid of some nasty shading at the sharp edges and I added bend in there just to bend a little to the top, well if I was going to bend a wing, I would atleast want it to be some what dense in polygons but not too much. I don't like bending with only two locations like most common fs add-ons out there, that looks ugly.

This is a wireframe only view just to show the mesh work.
 
Last edited:
Very nice work indeed. I will look up that video and take a look at it. No doubt I will learn some key techniques.

I started moddeling my wing for the CRJ and it all went well with the splines. I did it exactly as you guys mentioned. Copys of the airfoil only they got smaller and smaller as i went further outboard on the wing. I am know stuck at the Winglet level. Il post some images of the progress on my topic.

In regards to the winglet I tried capping the end an extruding while bending but i was getting an unwanted result so know i think il add a spline of the winglet then attach it to the model.
 
Liberty1,

Try also experimenting with the FFD cages, in contact points mode. They can make some very cool mod's to mesh in the bending department.
 
Liberty1,

Try also experimenting with the FFD cages, in contact points mode. They can make some very cool mod's to mesh in the bending department.


Ok, Il try doing that. Im guessing you mean using it on the actualy wing no on a seperate polygon for thw winglet. Il try both till I get a response

Thanks
 
Great!!!!!

I'm going to try this on my next model, now that have some time in on gmax, this looks alot easier than deleting the polys that are "flipped" on the opposite sides and recreating them. I can relate to the forgetting part too. About a million beers and ten years ago I could pick things up after years and be back to par within a few weeks. And, just to make ya feel better, I tried the splines too when I was just starting out, I gave up after reading the first tute on the technique.
 
My DC-8 is built entirely out of splines, the fuselage was once a spline, the tail was a psline, the nose is currently a spline, some sections of the nose are still splines.

Splines allow such simplicity that I was able to adjust the size of the top small cockpit windows with out having to delete or create polis. I just moved the lines and they moved along with the rest of the mesh.

It really is the way to model, you can make just about anything with them.

I believe that splines are the core aspect when creating any 3D model, the rest are just features to enhance it. You could build a car entirely out of splines .... infact this is how AutoCAD works.
 
Back
Top