• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

I find this weird.

Osian

Resource contributor
Messages
417
Country
netherlands
I have a problem and i don't know how to fix it as you can see in the pictures i created these windows but when i smooth the model it has shadows in weird places and simply looks awful

i need some help here :/ i don't know how serious the problem is. the program i am using is blender
also i am kinda new to the 3D modeling world

Thanks in advance
 

Attachments

  • show 2.PNG
    show 2.PNG
    137.1 KB · Views: 525
  • SHow.PNG
    SHow.PNG
    34.1 KB · Views: 530
Looks like the fuselage is already solidified

How will it look if you add an edge split modifier with a 60° threshold?

The shading also depends on how the vertices around the windows are connected to the surrounding ones, so could you please post a screenshot in edit mode?
 
Looks like the fuselage is already solidified

How will it look if you add an edge split modifier with a 60° threshold?

The shading also depends on how the vertices around the windows are connected to the surrounding ones, so could you please post a screenshot in edit mode?

Ok with the edge split modifier it looks a little bit better at the bottom of the windows but here are the screen shots :)
 

Attachments

  • ES1.PNG
    ES1.PNG
    128.2 KB · Views: 568
  • es2.PNG
    es2.PNG
    50.7 KB · Views: 470
  • es3.PNG
    es3.PNG
    93.4 KB · Views: 477
Maybe 60 degrees are not enough. Maybe you have to play around with the threshold value or split the edges around the window frames manually.
 
what you want to do is select the edges around the windows and press Ctrl + E and then press mark sharp. And after that you want to only have "sharp edges" checked... that should sove it. Also do you have a solidify modifier on that object? If you did you want to do the same thing on the edges around the windows on the inside ;)
 
Ok thanks it worked :)

Good to hear that ;) I recommend Sharp Edges because you could get the same result with edge angles but it could influence parts you don't want to be sharp... so I think it's better to use some Sharp Edges :)
 
what you want to do is select the edges around the windows and press Ctrl + E and then press mark sharp. And after that you want to only have "sharp edges" checked... that should sove it. Also do you have a solidify modifier on that object? If you did you want to do the same thing on the edges around the windows on the inside ;)

Thanks fo this explanation. I was not aware of that feature.
 
Hello

The first thing to do, is trying to connect those rough vertices and perhaps it will be a little challenge. The video is for 3ds max and perhaps this will help you in the future:

Go to 22:10 to review "cylindrical details".

Cheers,
Sergio.
 
Dang, that "Mark sharp" functionality in Blender is much better than the smoothing groups in (G)Max!
Heritic, as I read this thread (but admittedly not a blender user) I see this concept analogous to setting the edge crease in max, rather than simply defining the smoothing groups. I'm not at my dev computer right now, and I switched to 3dsmax long ago, so I'm just guessing gmax has edge crease as an option.
 
Ok i have another problem and the images explain it... well let me just say it is not nicely round where the "center tank" meets the fuselage.
 

Attachments

  • 1.PNG
    1.PNG
    255.6 KB · Views: 559
  • 2.PNG
    2.PNG
    228.4 KB · Views: 524
  • 3.PNG
    3.PNG
    116.8 KB · Views: 524
Well judging from that second image I'd say you've got two "meshes" in one "ovject", though they're not really connected. It means you'll have to connect verts from one object with that of the other object, in a flow that's represented in the aircraft.
 
Well judging from that second image I'd say you've got two "meshes" in one "ovject", though they're not really connected. It means you'll have to connect verts from one object with that of the other object, in a flow that's represented in the aircraft.
Wow it looks so much better already thanks !
 

Attachments

  • 4.PNG
    4.PNG
    117.5 KB · Views: 448
Hello

In the image named 4.png, something weird is happening in the center line (middle center to bottom). I believe if you has performed a junction with symmetry modifier (symmetry in 3ds max) or something like that in blender in this point, you should adjust the welding settings a little bit more. This careful inspection will guarantee the seamless union between two halves. Looking good, by the way! :D:D:D

Cheers;
Sergio.
 
Sergio is right! (I hadn't yet looked at it)
So what you need to do is fiddle around with the merge limit (I believe it has to get a bigger limit to merg propperly, not too much though).
 
Back
Top