• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA i love gmax

jetwelder

Resource contributor
Messages
329
Country
unitedkingdom
used fsds 3.5.1, for three months, built nice model of lovell telescope for jodrell bank and photo scenery, built really ugly model of english electrick lightning fmk6 for fsx. switched to gmax 1.2, or is it 12...anyway..i am in awe
of this superb tool..

maddening at first, the tutorials seem different in subtle ways to my version of gmax, the aircraft tutorial cant make its mind up where the dimensions are supposed to go, even so completed tuts to my my satisfaction..bought gmax bible,nice...downloaded from here all the great wiki stuff,marvelous...

i watch arnos tutorial constantly, as it beats anything on tv..

the backdrop method as in the gmax tut can be used succesfully, but will drive you crazy..tried the box method tutorial, the mat editor is not the same as mine, lost the plot at that point..what is blindingly obvious to the master is complete confusion to the pupil..

saw a mention of using planes to apply bmps to...went to hospital for 3 days
intravenous antibiotics,i had rubbed my wrist against my sharp edged desktop, an infection in the skin had got into the wrist joint, i left it too late..it gave me time to read the gmax bible..the antibiotics worked, ime back , wearing a wrist protector..all those years in heavy engineering, underwater work, nuclear power,etc.. and i end up in hospital bitten by a mouse,,or maybe gmax...

applying bmps to planes,brilliant....i have 5 scale views with scale measures in the bmps..left, right, top, bottem, front...cropped and applied to planes, the scale allow me to make the planes exactly to size, i can switch between top and bottom view usefull for gear door plcement, iwish i had a back view..

the perspective view is stunningly beutifull..my fuselage hovers above the surface, surrounded by views that become transparant when occluding the other views, placed at a suitable distance , lined up with my datums, and with extended undercarriege wheels resting on the ground plane. you couldnt do that in fsds...my real problem to solve next is building using splines..this tool demands elegant techniques..i will be back, bye for now and thanks for all the fish...jim
 
The only time I've ever looked at FSDS was years ago while helping Louis decode some of the more obscure parts of the export .dll that takes a .max or .gmax source and generates the intermediate .X file.

My problem with FSDS was that with me being so used to the Max/GMax methods, I simply could not stand using the keyboard to accomplish the tasks that required only a very few mouse clicks... :D

If I could only offer one item of hard-learned advice, that would be...

...do not EVER use the "Mirror" tool icon on the top menu bar...

In fact, I highly advise everyone to customize their configuration to remove the "Mirror" tool icon from their GUI. That way they'll never forget and accidentally use it! :rotfl:

You see, the "Mirror" tool will reverse every property of an object, including the normals, with the net result being that your object in FS will be "inside out."

Use the "Mirror" modifier added to your working stack, as it does not invert the normals...

Welcome to the insanity of Max/GMax design! :D
 
I have become loyal to gmax--- that is ever since I finally understood how to get it to work :D I used to use Sketchup then import into gmax, then export to FS, but I have to say that gMax is pretty easy now. :)
 
#1 - Another Luddite gone to the "other" side ... <sigh>

PS - Keep FSDS. Create a basic box with the contact points, etc. export that as your first MDL, which creates the basic file and folder hierarchy.... then go ahead and model in gmax. When it comes to export the MDL, you don't have to create all the files and folders from scratch.


#2 - You may also want to look into setting up your "backdrops" into the opacity slot (rather than the diffuse) slot of the plane's material. This way you can get a transparent plane, with the visible outline of the section.

Basically, you're building your model on a "jig" rather than against backdrops.
 
Ahhh na Im not going to start another one of those threads lol ....though I do find it fascinating that Bill has the same issues with FSDS that I have with G-max ;)

Is it only me or do these FSDS to G-max converts end up like reformed smokers?
Meh I normal retort there comments on the filthy habit with "nobody likes a quitter" :D
Wozza
 
But you haven't lived until you try to extrude a polygon in FSDS or try to go into cross-section mode in gmax!

At least the "mirror tool" in FSDS works the way it should!

<G>

Ahhh na Im not going to start another one of those threads lol ....though I do find it fascinating that Bill has the same issues with FSDS that I have with G-max ;)

Is it only me or do these FSDS to G-max converts end up like reformed smokers?
Meh I normal retort there comments on the filthy habit with "nobody likes a quitter" :D
Wozza
 
LOL...so does the mirror modifier (in the modifier stack) in GMAX. I'm on a self imposed sabatical to learn 3DS Max so I can really screw things up! All of my stuff for FS9 was FSDS, but it took so long for FSDS to come around and be ready for FSX, I learned GMAX sufficiently to make slightly less than a mess with it.

I quit smoking a couple of years ago too....:)

Jim
 
Last edited:
If I could only offer one item of hard-learned advice, that would be...

...do not EVER use the "Mirror" tool icon on the top menu bar...

In fact, I highly advise everyone to customize their configuration to remove the "Mirror" tool icon from their GUI. That way they'll never forget and accidentally use it! :rotfl:

You see, the "Mirror" tool will reverse every property of an object, including the normals, with the net result being that your object in FS will be "inside out."

Use the "Mirror" modifier added to your working stack, as it does not invert the normals...

Welcome to the insanity of Max/GMax design! :D

Hi, I am new to GMax and finally getting an aircraft project going for a friend of mine. It is a UK Meteor PR-19 (very interesting if you look it up) :)

My last published aircraft project was a Spitfire Mk XI (built in Flight Shop) so GMax is wonderful and daunting at the same time.

I am almost done with one of the jet engines and want to "mirror" it to the other wing for the second engine, but now you say mirror is the wrong way to go. Please describe how to clone and then mirror or whatever is the correct method. Thanks!
 
Hi, I am new to GMax and finally getting an aircraft project going for a friend of mine. It is a UK Meteor PR-19 (very interesting if you look it up) :)

My last published aircraft project was a Spitfire Mk XI (built in Flight Shop) so GMax is wonderful and daunting at the same time.

I am almost done with one of the jet engines and want to "mirror" it to the other wing for the second engine, but now you say mirror is the wrong way to go. Please describe how to clone and then mirror or whatever is the correct method. Thanks!

This is a pretty old thread, may be better to make a new one. There is a thread on this, let me find it.

Here it is.
http://www.fsdeveloper.com/forum/showpost.php?p=623592&postcount=7

here is the thread the post came from.
http://www.fsdeveloper.com/forum/showthread.php?t=424458
 
Last edited:
Add a mirror modifier to the stack instead of using the mirror tool - then choose the mirror axis - simple as that.

Jim
 
Wow...FlightShop!

I still have my CD and manual around here somewhere. Might be worth something someday! :D
 
Having started modeling in 3ds Max, I generally regard GMax as a step backward in some regards.
I do not dare to imagine what modeling in FSDS must be like. :eek:
 
Having started modeling in 3ds Max, I generally regard GMax as a step backward in some regards.

At $3500-$5000 USD per copy I think 3DS Max would actually be a significant step backwards for me :D .

I'd love to try it one day though...
 
Hey Jet Welder,

Congrats! I love Gmax as well.

I started out in FSDS and was having tough times making curved cutouts in FSDS at the time. I made the jump to Gmax and fell in love with all the tools.

I have just jumped to Max 2012 and Im amazed at all the new tools here as well. But glad I went to Gmax first for a long while before going to Max.

So much to learn.
 
I was thrilled as well to have GMAX available. I used FSDS as a first generation product, but when GMAX came out, I had a free opportunity to learn a professional interface and workflow. Used it for years...fun to see a new user being excited.
 
I loathe ketchup all over my ... oh sorry. :o But seriously, some of us have never known anything other than gmax: it's still an extraordinarily capable program. I have no issues with Sketchup or FSDS, I just haven't used them and don't know what I may be missing if anything. And I've now moved to Max... :D
 
it seem to me all the very same complicated thing, so don't worry what to use. With Gmax all is set up for export Mdl. and is a little extension of 3ds Max. so some steps can be saved what in developing is gold. Sketchup is really funny to create things, really.
 
Back
Top