• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Looking for dev laptop suggestions

Gaiiden

FSDevConf team
Messages
751
Country
unitedstates
Anyone here work on a laptop? I need a new one and while I could just drop a G or two on something from the like of Origin or Alienware I'd like to stay under $1,000 since this will only be used when I'm on the road and not as a main machine. Note I'm not interested in actually flying on it so performance doesn't have to be huge. Thanks in advance for any suggestions
 
First, go with an SSD HD.

Second, latest, nice GC. DX11 is required for P3D V2.

Third, if you can, get i5 chips. i7's would be nice.

Alienware make nice laptops.

I have a super thin ultra notepad by Vizio, upper range with Windows 7 Premium. I cant tell you how impressed I am with it. Runs the sim fine and can run 3DS Max 2014 fine. I think I paid $1200.00 USD for it at Costco. I can plug it into my 42" LCD HDTV, run a mouse and keyboard to it, and presto, I have a backup main computer. You can set up Windows to run with the lid closed, then place the thin laptop into one of those Mac holder stands (the laptop is stored on its edge like a book end). But the vents are covered up on my Vizio so I don't do that a lot with it.
 
Go for that SSD regardless of what you buy. It's the single most useful component for a laptop (next to a good GPU, which is hard to come by in the mobile market).
 
I'm only using a laptop, but I guess making tools is slightly different from making the actual addon. When I picked this laptop a few years ago I made sure it had a good graphics card and a good CPU (i7). At that time SSD was not so affordable yet.

Given that we are a few years further I would expect that it should now be possible to buy more for the same price :). I ended up buying a Sony laptop at that time, it was there more high end model I guess (but not like the Alienware ones that are targeted at gamers).
 
Remember, you can clone a HD, so you can buy the computer, then get an SSD for it and clone the HD to the new SSD and install that. (Unless you get a Mac Air which you cannot change out the HD's, if I heard correctly. Custom made super flat HD's in those).


I agree that SSD's are important, especially in laptops. Not only are they drop proof, but they are ultra fast. Your bootup time is cut in half, if not faster. Running a sim on it is incredibly smooth.

If only SSD's were slightly thinner, you could put two in a laptop if they were just slightly thinner. Incredibly small. Like a credit card wallet.
 
Funny thing about disk cloning: Linux has less isues with a complete change of hardware than Windows. My laptop is still suffering from the cloning process. Might use the opportunity and try out Windows 8.1.
 
Thanks for the responses guys I will see what I can find this month...
 
Something I need too. My current Samsung was fine until P3D v2. Now I need something that will run DX11. I prefer laptops but I guess I might be forced to look at desktops.

I don't need to fly but I do need to be able to run up the Sims!

Annual Florida trip has been delayed this year by the now house but I will be down at the condo in mid March. My sister has a Costco card. Never thought of going there for hardware but Best Buy is nearby us and I have an account there.....
 
I would say a lot depends on what do you expect it to do while on the road.
3D graphics? Testing said graphics? Photoshop? Coding?

I agree that if you are going with anything better than budget laptop, SSD is a must. While in desktops, it still kinda makes sense to go with a fast rotating drive, if you are on a budget, in laptop market, there is no other way to go. You can always complement it with an external drive for storing unessential, large files. e.g. get a 360G or 512G SSD drive and a 2TB external one, and only copy the texture or model you are currently working at to save diskspace.

Other components I would choose depending on what do you want to do with the laptop.
 
What about Mediom, this guys seem to sell laptops which are devoted to games. It's now they begin with desktop pc, which is what I got, don't know this Brand but it seem they have been in this market time ago.
 
My 2c :twocents:

I purchased a moderately high end Dell 15z some while ago.

SSD -- yes, yes and yes. Get the largest one you can afford. They are not that much nowadays. Fast, quiet, cold, drop resistant and relatively power efficient.
HDD rarely die on my desktops, but they frequently do on my laptops (just my experience, 3 hdd wearouts on various laptops, one overt failure)
I am soon to swap this 256Gb SSD for a 960Gb one.

Specialised Nvidia chip (Hybrid graphics) -- the limiting thing will be how this system runs the sim (even for testing) -- all the other stuff will run just fine.

You are a power user. Get a full-voltage i7 or i5 chip. ulv-chips are not the real deal. That basically rules out ultrabooks.

Storage: Use a fast SD Card (SDHC) for developer source files and projects that don't need to live on the main drive (Class 10 64Gb cards are not that expensive, or $86 for a Class 10 128G card). Or use a USB stick. Added advantage is you can move them easily onto a desktop later. USB3.0 sticks are available now, but if there is a built in card slot, you have (not full speed, but adequate) cheap extra 'built-in' disk drive.

Careful with unproven chips / cards or architecture. The wireless card in the Dell 15z was nothing short of a PIG:tapedshut when I got the computer (same in one of the Toshiba models that also used the same Intel chip) For 12 months (at least) afterwards: Packet loss, dropped connections, slow LAN performance. Unworkable, particularly as I keep sorce files on a network-drive and specifically got the card for its Wireless-n speeds. It has been a frustration that has now sorted, but at the time the only thing that stopped me returning the thing was the stress of reinstalling 3DSMax :banghead:, FSX:mad: and all the bits:eek:. (My workaround, now not necessary, was to plug a wireless access point into the ethernet port!)

With wireless-ac on the doorstep .. be wary.

My go-to brand would be Asus (best three laptops I ever owned) Transplanted hard-drives and gave each of them in turn to my mum, who doesn't use Flight Simulators.
 
Last edited:
Hcornea, you posted some good material here. It is really more along the lines of your 2 dollars since it is higher value.
I will slightly expand upon it to aid the decisions.
I purchased a moderately high end Dell 15z some while ago.
I like dell. for a while i was hesitant but they have become a better brand than a few years ago.
HP has gotten a little worse IMHP since their hardware cards seem to warp from the heat, but IIRC this issue was rectified.

SSD -- yes, yes and yes. Get the largest one you can afford. They are not that much nowadays. Fast, quiet, cold, drop resistant and relatively power efficient.
HDD rarely die on my desktops, but they frequently do on my laptops (just my experience, 3 hdd wearouts on various laptops, one overt failure)
I am soon to swap this 256Gb SSD for a 960Gb one.

Specialised Nvidia chip (Hybrid graphics) -- the limiting thing will be how this system runs the sim (even for testing) -- all the other stuff will run just fine.

You are a power user. Get a full-voltage i7 or i5 chip. ulv-chips are not the real deal. That basically rules out ultrabooks.
SSD are great as long as they dont fail, and i rarely hear of one that has so +1 here. Far more reliant than hdd's. If you have OTB or auto backups onto another drive the you have nothing to fear from a failure. A RAID array for example could aid with this, but laptops usually dont have the tech onboard for raid.
It sucks there arent more available gfx cards for laptops that aren't excessively priced, but portability sells. Integrated gfx is common for laptops and essential for their size.
Let me rephrase; it sucks laptop manufacturers dont offer more flexibility to chose a card since the ports arent available on a lot of models.
For processor, go for full voltage and the latest generations of the i5, i7 or even the i9 if price is no issue (and it really existed). I think it was slated to be i9 but was changed to a variant of the i7-9--. Later generations have many improvements and possible bug fixes.

Storage: Use a fast SD Card (SDHC) for developer source files and projects that don't need to live on the main drive (Class 10 64Gb cards are not that expensive, or $86 for a Class 10 128G card). Or use a USB stick. Added advantage is you can move them easily onto a desktop later. USB3.0 sticks are available now, but if there is a built in card slot, you have (not full speed, but adequate) cheap extra 'built-in' disk drive.
you can also use external hdd that connect via SATA, firewire, usb 2/3, serial, or other ways. I have a toshiba 320gb external that i use.
Also important to create a system backup disk before you start customizing. Most laptop mfgs are moving away from providing a restore disk with the pc in favor of either a partitioned drive dedicated backup, a small storage drive of sorts locked from use except with backup restore function, or a cd that you have to pay extra for, ive seen $25 up to $90 USD for this backup/restore disk. Acer its 25-35 depending on windows version and associated hardware drivers. There is also the possibility of downloading a backup for a reduced price in some cases. The CD and download is becoming more used since it does generate revenue. This also depends on the price you pay for a pc. A $500 may or may not come with a backup source whereas a $900 will have an integrated backup.
Another option is to use your old hard drives solely as storage drives using a...jumper i think its called?
Anyhow I also do this using 3 of these.
http://www.amazon.com/gp/product/B0019HLE7Q/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Its been reliable. I have one for movies and media, one for fs related files, one for system b/u, one for master b/u of all...etc.

Careful with unproven chips / cards or architecture. The wireless card in the Dell 15z was nothing short of a PIG:tapedshut when I got the computer (same in one of the Toshiba models that also used the same Intel chip) For 12 months (at least) afterwards: Packet loss, dropped connections, slow LAN performance. Unworkable, particularly as I keep sorce files on a network-drive and specifically got the card for its Wireless-n speeds. It has been a frustration that has now sorted, but at the time the only thing that stopped me returning the thing was the stress of reinstalling 3DSMax :banghead:, FSX:mad: and all the bits:eek:. (My workaround, now not necessary, was to plug a wireless access point into the ethernet port!)
I had a toshiba with wireless card, it failed 3 months after i got it so i know your frustration. but overall toshiba was a great pc.
Experimental hardware can be good or bad so its best to weigh the options when deciding on the unproven tech.

With wireless-ac on the doorstep .. be wary.

My go-to brand would be Asus (best three laptops I ever owned) Transplanted hard-drives and gave each of them in turn to my mum, who doesn't use Flight Simulators.
Asus is a good brand. I almost got one.
 
I am fine with my Asus. It has served me well over some two years, even though it was a budget machine. It made way to a desktop now that portability is no longer an issue for me, as I live back home (after college). For the on-the-road stuff, I can always use the Lenovo I got at work - those are also holding up well for us so far.
 
Yes, lenovo is a durabrand. I have a budget Acer and it works well. FSX with medium settings I get 18-25fps depending on city.
I have owned/used the following
Laptops
toshiba - owned - great
Compaq post HP takeover - owned - fair
Dell - used - fair
Averitec - owned - great
asus - used - great
lenovo - used - great
mac - used - different altogether but great
hp - owned - great except for longetivity
Acer - owned - good/great
alienware - used - freaking awesome
custom built - used - mixed

Desktops
Dell, HP, Toshiba, Compaq pre and post hp, Systemax, E-machine, and many many others I cant possibly list here.
For gaming, Alienware, Dell XPS, Asus, Lenovo, CyberPower, iBUYPOWER, Cybertron, Ultimate, and Ive noticed Gateway has come a long way, are all good brands for gaming. None of these will compare with a custom build by you or a custom build company like Digital Storm, Maingear or Origin....I drool for one by Maingear, the Zeon ES.
Note: the custom built I talk about is not the same as Custom Built the custom build pc company, which is also good. Custom is also another good builder. Pugent, the list goes on and on for custom build of pc's. Local shops are pretty good and usually will offer a good warranty with purchase (voided if you visit porn often enough since so much malware is through that venue)
 
If I could fit an i5/i7 into my Lenovo, I'd never ever give it away.
 
I purchased an Asus G-73 to do just what you want to do. Modeling while traveling. It has an i7, two 500GB drives, dedicated Nvidia GPU (2GB?), 8GB RAM, Blu-ray, an outstanding 1080p 17" display. Best cooling design I ever came across for a laptop. It was freakin' fantastic. Of course no sooner than I bought it my company buys me a laptop that I "had" to use. So that $1800 unit just sits in the closet. :(
 
I purchased an Asus G-73 to do just what you want to do. Modeling while traveling. It has an i7, two 500GB drives, dedicated Nvidia GPU (2GB?), 8GB RAM, Blu-ray, an outstanding 1080p 17" display. Best cooling design I ever came across for a laptop. It was freakin' fantastic. Of course no sooner than I bought it my company buys me a laptop that I "had" to use. So that $1800 unit just sits in the closet. :(
Ill take it. :)
 
No, it's an ATI 5870. Just noticed the HDD's are 7200 RPM, not the typical 5400 RPM. I should really find a a use for this monster. I should see how P3Dv2.1 performs after its released as I hear ATI's are working better visually than Nvidias at present. I could throw in some SSD's, double the RAM to 16GB, it could be a screamer of a laptop.
 
Back
Top