• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Mapping Troubles

Messages
153
Country
us-california
Wondering if anyone can help me. I received this model from somone else and I am remapping it for Higher Resolution textures. The model was mapped with all exterior parts (fuse, wings, tail) on one file before. Im splitting them up to have their own. Anyways I have deleted the UVW maps and materials, but the tail is taking on the texture map of the wing and if I map the fuselage they all take on the map of the fuselage. Any ideas how to get rid of the old mapping?

 
Create a new Material ID with no textures and apply it to the parts you do not want to see. Then delete this new ID and it will go back to default colors. There is no need to do this since your making all new Material ID's anyways. Just create 3 new textures. Fuselage, wing, tail which includes engines. Wing can include gear. This allows you to fit all parts with 3 textures. Then apply the Material ID's to the correct parts and keep the old mapping and just re scale that mapping to where you want on the new texture layout.
 
You have to change the material of each object to be separated from the others. At the moment they all share one material, so give say, the fuselage its own material, the wings and stabilisers a different material etc. There's no need to remove the original mapping.

Once that's done you can scale up the mappings. If you're using Gmax I'd suggest using UVW XForm to apply a consistent scaling, then all you have to do is move the mapping(s) around on the UVW template to suit.

Did I see that model on SOH a while back? If so, good to see it being continued.
 
Thank you both for your replies. I am very new to GMAX and not exactly sure how to do the above mentioned. I would like to remove all materials and UVWs and just start from scratch mapping. Yes this is the one that was posted on SOH a few years back. Im just trying to help finish it up, but this issue has all progress halted
 
Thank you both for your replies. I am very new to GMAX and not exactly sure how to do the above mentioned. I would like to remove all materials and UVWs and just start from scratch mapping. Yes this is the one that was posted on SOH a few years back. Im just trying to help finish it up, but this issue has all progress halted
In 3ds max there is a tool for that porpose in "utilities" , "uvw remove" don't know if gmax have it
when this problem arose is good also to detach the parts, as easy as that.
 
Gmax also has that tool. Tankerguy, have you experience with any other 3D modelling tool? If you're new to modelling and mapping you have quite a lot of learning to do.

There's a number of tutorials on mapping in the wiki here, including a six-part series I did a year or so back.
 
To get to the UVW Remove tool, go to the Hammer tab on the stack (right side of the screen). Then press the UVW Remove button, and then both the UVW and Material button at the bottom. You need to do this for each part in the plane - you can select all the parts first and do them all at once if you like.
 
Yes I have used the UVW remove tool. That's why I am so lost. I have removed all old materials and did the UVW remove on the fuselage parts. Do you know if one small object was left with the UVW on it would it still affect all the others on that map?
 
You might find it easier to create a new single color standard material, use green as it allows red and blue vertices to show up better, and apply the new texture. Map the model and when you are ready create a new FSX material with your texture sheet and apply it to your previously mapped model.
 
you can look for materials that don't should be there or that have not been deleted with the quad menú. select the model in question , right click, look in "properties" there you will see the materials name.
 
You can also use the Material Navigator (button with balls along the top of the screen) to see what objects are assigned to which material.
 
Here's an example using the Gmax Material Navigator. The model is fully mapped and textured and the Navigator shows materials, maps used and lists the objects using them:–

matremove01_zpsgsyvcmt6.jpg



From the Tools tab, remove materials from all the objects:–

matremove02_zpssw2afmpo.jpg




The Material Navigator, set to Selected goes blank:–

matremove03_zpsiii0mqy5.jpg



but that's not the whole story, there are still materials applied to the model:–

matremove04_zps8y8svinx.jpg



So you need to unhide all hidden objects, select them and remove their materials too.
 
Thank you all for your replies theyre very helpful and the tutorials from Hairyspin also! I went through every part, deleted the UVWs and Material removes and went into the material editor and deleted every material that was in there. Hopefully I have a blank slate to start working with now. I hope this solves the problem now.

 
I have a question I have the front half of the fuselage and the rear half to be mapped seperate. I noticed if i just select the front fuselage half alone it would fit nicely into a 17.5m UVW box, but when i add the window framing together with the front fuse half it fits into a 13.5m box? Why is it changing sizes like?
 
Take control: set the mapping size yourself in the UVW Map modifier. If 17.5 x 17.5m is the size that best suits, set the X and Y sizes to that size.
 
A good system for UVW mapping of the exterior model is to select the longest section of the aircraft to be mapped. For example say your fuselage is 13.8m then you want the UVW box to be slightly larger to give you room at the edge of the map so you would set the size to 14m. Now you want to set the same size for of 14m for the wings, rudder, elevator, etc. The reason for this is that all external surfaces are the same scale. Now when you paint your texture sheet you can set such things as rivets to a certain pixel size that will be uniform across all your texture sheets. This will ease the painting job and simplify things for repainting. I hope I made this clear enough.
 
Thanks for the replies. Hope this makes sense, so I have the front fuse half by itself would fit a 17.5 box. I want to map it though with the frames also, but when I select them all together and add the UVW it is smaller and fits in a 13.5 box? Why would it change by selecting more objects?

I should say I only figured this out because I was laying textures and noticed the front half and rear half didnt match up on rivets sizes even though both were mapped in a 13.5 box. Something is changing the front when more objects selected

First image is fuselage only (17.5) Second image is fuselage with window framing and gear doors included (13.5)

 
Are you letting Gmax decide the mapping size or are you actually setting the mapping size?
 
What happened to the editable poly in the 13.5 box image? It is not in the stack as with the first image. If you are grabbing more then one object this could be a scaling issue.
 
Back
Top