• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX More Material Help

Messages
292
Country
unitedkingdom
I have managed to get the aircraft model paintwork looking ok with the FSX material settings but now I am finding it hard to get the chrome & glass materials to work, I found a thread on this forum "FSX Glass material, realistic glass." http://www.fsdeveloper.com/forum/threads/fsx-glass-material-realistic-glass.21116/ which includes a "recipie" by n4gix, which I followed meticulously, but in FSX the results are disappointing, the glass appears to be non-existent apart from at a certain angle the windshield has a slight glint of reflection, I even tried to set the opacity to 100% but with no change.

One thing I did notice is that in the FresnelRamp settings the reflection setting is supposed to be checked, has this any thing to do with a reflection texture being assigned to the material, if so then I have not assigned one as it is not mentioned in the "recipie".

Also I am finding it difficult to get any results with my chrome material settings, I have followed the settings as detailed in the FSX material html, but I get no shine, glossiness or reflection, I would be very grateful if someone would post the FSX material editor settings they use & also the diffuse & alpha RGB's that are best for chrome.

I really appreciate the help that the members here provide to the less informed.

Paul
 
Currently distant Form my machine so no image, sry.
But:
Die you already check the 'allow Bloom' option and play around with the 'specular bloom floor' value? That' s even more important than reflections due to my opinion.
 
Yes, this is n4gix's "recipie" for glass below.

Blinn Opacity: ~6%// I have tried different values.
Diffuse Color: 64x64 pixel DDS/DTX5 w/Alpha
Specular Color: (same bitmap as Diffuse!)
FresnelRamp: (one of the defaults or custom)
Diffuse: x
Reflection: x
Specular: x
Special Functionality:
x: Blend diffuse by diffuse alpha
x: Use global environment map as reflection
Reflection Scale: 100%
Specular Map Power Scale: 256
Bloom:
x: Allow bloom
x: No specular bloom
Source Blend: SrcColor
Destination Blend: InvSrcAlpha
Emissive Mode: AdditiveNightOnly
x: Z-Test Alpha
Alpha Test Mode: Always
x: Set final alpha value at render time
Final Alpha Multiply: 255.0
x: Z-Write Alpha
 
How black is the alpha channel in the window texture? If too dark, that could cause it to be too transparent?
 
If you are running FSX in DX10 Preview this has caused a problem for some people with glass missing. Also uncheck these settings and try it.
x: Z-Test Alpha
Alpha Test Mode: Always
x: Set final alpha value at render time
Final Alpha Multiply: 255.0
x: Z-Write Alpha
 
Tom, I have the alpha for the diffuse & specular set at RGB 190,190,190.

Paul, I am not using DX10 Preview so that can't be a factor, I changed the settings you suggested & the glass looked the same?
 
I still haven't got my glass material working yet but I have been working on the material settings for chrome, below are some screenshots showing my results;

Chrome Examples.png


The example pictured on the left is with the Reflection Scale set ay 100 & Specular Map Power Scale set at 255, the other has the Reflection Scale set at 32 & Specular Map Power Scale set at 202 as I read somewhere that this is the settings to use, but as you can see the results are not good, I used the following RGB's for the textures.

Diffuse RGB 126,133,134 Alpha RGB 171,171,171
Specular RGB 60,59,58 Alpha RGB 48,48,48
I have tried different RGB settings but showed no improvement

Also, these are the settings that I have used in the Special Functionality section.

Mat Editor Settings.png


I have not changed any other settings apart from these.

I have assigned the GlobalEnv_AC_Chrome texture to the reflection map, for some reason I have no option to load it as a dds file so I converted it to a psd.

I would appreciate some advice on how to get better results.

Paul
 
The default chrome DDS file is not very bright to start with. So i finally designed my own Chrome Cubed Map and now have bright chrome without setting the global slider to 100% which will give you distortion. If you want to improve these results use a dark grey texture for your diffuse and crank the global slider up to 80%.

For the check boxes i select these settings. 2,3,5

The more you increase the specular slider the smaller the light area gets. So i always use 60 for large parts and 120 for smaller parts! This texture should be a dark white!
 
Last edited:
Thanks delivery guy for your help, I tried your recommended settings but the results were not good.

Spinner.png


I changed the diffuse to a dark grey & the specular to a lighter grey & I set the reflection at 80% & the specular power to 60, also changed the Special Functionality check box settings. Maybe it is the alphas that could be the problem, I am using the same alpha RGB's as previously mentioned.

Paul
 
What does the texture look like that you are applying to this prop hub? In FSX it's best if every part has a texture applied.
 
Here is a nice idea that I got from N2056. I embellished on it for my own needs. This works for objects that need no special art work so you can collapse all the vertices and weld them together to reduce draw calls. Then drop the welded vertices into the desired section of the map.


 
Use these instructions to make sure your getting the default world chrome setup correctly! I posted this yesterday for another post! Skip the bump instructions.

Good material editor setup for fuselage textures::wizard:

Diffuse color for the main texture.
Use a dark white texture for the specular color.
Use your rivets from the main texture for the bump. (Convert to DDS)
Use the default global environment for the reflection. (create a black texture and name it "GlobalEnv_AC_Chrome" ) And no need to add any texture in aircraft texture folder.

Right above special functionality in the Frenel Ramp section, select all three check boxes. Diffuse,reflection,specular.

In the special functionality section check these boxes,,,,2,3,5

Put the global slider to 8 and the specular to 64.
 
Thanks for everyone's help.

I made the specular texture lighter with a pure white alpha & the diffuse texture darker with a darker alpha, also I used the Special Functionality settings that I was originally using as above.

Spinner.png


Now it looks more like it should do.

delivery guy, thanks for the info, I did see your reply in my other thread, sorry for not acknowledging it.

Paul
 
Now that I have my chrome looking half decent, I still cannot get my glass material setup right, I tried the glass settings used for the default DC-3 but it looks terrible, no reflection or shine.

Can someone please help me with this, I would like to know the material editor settings & what RGB colour to use for the alpha channel, do both the diffuse & specular bitmaps have an alpha?

Paul
 
Are you using a bump map for chrome? I found that using a bump map, even one chopped (cropped/copied) from another bump map that has zero bumping going on will make the chrome come to life. I dont know why. Maybe something to do with the game engine.
 
Also, perhaps think of glass as a transparent of chrome. How about duplicating 'chrome' and call the new one 'glass experiment' then tick on the 'material is transparent', then adjust it for opacity and see how that looks in the sim.
 
Thanks Bill,

DAA, why didn't I think of that, I just used the settings I had used for the chrome for the glass, reduced the opacity & set it as transparent & voilà my windows look like glass!!! now I just have to tinker with the diffuse alpha shade & specular colour to get it the way I want it. Should I include a bump map & a Fresnel_Ramp map?

No, I have not tried a bump map with my chrome, I may though just to see what it does.

Thanks again.

Paul
 
Well, glass isn't really "bumpy" so I'm not sure why you'd want or need a bump map... o_O
 
Back
Top