• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Need Help with Carriers.

Messages
21
Country
unitedstates
I did a search and couldn't find a help file only the Tutorial that came with the FS004 GMAX SDK.

I have a FS Design Studio file of a carrier Nimitz.fsc and im having troubles trying to make a Landable deck. First i tried Creating a bgl of just the carrier though FSDS, then i made one of a airport and runway with BGLCOMP but when i added a gate it Crashed to Desktop when i went to it so i tried GMAX.

I got GMAX up and running with the FS2004 GMAX SDK and I import the dxf file that i converted from FSDS, and I can see the carrier in GMAX well I followed the tutorial about creating a house and Created a LOD, 3 of them, created a Dummy named the same as the file, linked all the LOD to the dummy no problem went to export and I get this error in the log.



Running model

Start! (C:\Program Files\FS2004SDK\BGLCOMP_SDK\CVN-68_Carrier)
Loading X C:\Program Files\FS2004SDK\BGLCOMP_SDK\CVN-68_Carrier...
Error in exporter: Mismatch between # vertices (9) and # normals (0) in part island09.

Error!

In the log file so I started over took and got rid of the rest of the carrier except the deck parts grouped them and named them Deck_LOD_100, I made 1 LOD of them created a dummy and linked the LOD to that, then I cloned the LOD for the deck and named it surface.

Then i ran the AttachToolGmax.ms Script, selected the FS2004 Effects folder then I chose Platform and I put Carrier_Deck as a name chose asphalt as a surface and selected the surface part and hit create platform and I get

– Unkown property: “name” in Sselection

And in the listener i get this.

-- Error occurred in attachPart()

-- Frame:
-- attachType: "platform_"
-- attachName: "Carrier_Deck"
-- attachText: "<Platform name="platform_Carrier_Deck" surfaceType="ASPHALT" /> <NoCrash/> "
-- fullXML: undefined
-- called in createPlatform()
-- Frame:

I took the FS Design Studio model and made a bgl just for the looks of the carrier and I was going to add this as another bgl.



Please help I would like to learn how to make it but its not working.
:banghead: :banghead:
 
Hi,

I have no idea what happened with the first error, maybe you could try to recalculate some of the normals. But I am not sure if that is the problem as I have never seen it myself.

About the platforms, do you have MSXML4 installed? That is also used by BGLComp and it think there is a problem now with parsing the XML code of the platform.
 
Arno, the 1st error is when the file is converted from FSDS to Gmax via a DXF file. I often get this when using CVA_Converter.

A lot of work is required to clean up the Nimitz Carrier but the Hard Surface will work. Im trying to clean up the copy i have for Chris before i go on vacation with a working deck that he can use for his projects.

I dont envy him having to reskin the carrier tho.

Jeff
 
Thak you so much for the help when i get done ill have carriers you can go from Maine to Virginia to Jacksonville FL to Pensacola FL to Baja California to san fransico to seatlle to pacific then to hawaii with out running out of fuel. them im going to add a few WWII carriers out in the pacific.
 
I am trying Airport for windows 3 i cant use Flight Simulator Scenery Creator because i cant elevate runways but when i tried writing a XML and using bglcomp went into AFCAD and added a Parking place when i load the place it crashes FS2004.
 
Well Airport 3.0 is out of the question i just tried every combanation to get it to work, I created 2 runways one on ground level with a flatten and one at the decl altiude and i put a texture on it to see where it is well its at the deck height but you fall right though it and the surface or evlevated polygon dosent work. :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead:
 
Hi Chris,

I think the approach Jeff was talking about is best. You import the model in GMax and clone the deck there. From that deck you make a platform. All the visual stuff you can then remove in GMax again (you have your visual model from FSDS2). So in the end you will get a small MDL with only the platform. You then need to place that along side your API. I think that should work fine (unless you want to use the carrier in Fs2002 as well of course).
 
Well i tried something the other day, in FSDS i took and removed everything except a few pieces that made up a full deck and tried turning it into a api macro opened in both FSSC and Airport and created a elevated Macro and fell through. Then i tried the platform idea in GMAX made only a deck added the Dummy and LOD's and got the error i have run out of ideas im going to try just to make a Retangle delete the carrier and make that a platform and see what happens.
 
Since I made allmost all carriers that are active today, from Nimitz to Charles de Gaulle, Invincible class, Tarawa, Wasp, Principe,...

It is possible. Just make a simple plane of the correct size at the correct location, clone it, attach the platform effect, that will work. Do not rely on anything imported from other programs - an imported mesh will always remain a strange object to GMAX without any surface properties.

If you have two plattforms within sight, and aircraft shadows enabled, FS9 will crash - aircraft shadows do not work with several landable surfaces. The projection of the shadows is nonsense anyways.

Some more tricks are needed to have a FS9 XML airport at the location of the carrier, but this is possible too, just look at
http://secure.simmarket.com/product_info.php?manufacturers_id=38&products_id=1286
 
Back
Top