• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Newbie Question(s) here

Messages
6
Country
southafrica
Hi there,

I have been wanting to make aircraft for flight sim for a while, I has FSX Deluxe as well as FSX Acceleration, I d/l'd gmax 1.2..... What else do I need?

I want to model all the Van's RV aircraft from the 4 to the 12.

Any advise from the powers that be here would be greatly appreacited.
 
You did not need to download gmax. - it's included (and the help files) in the FSX Deluxe disc. You still have to install and register it at the turbosquid.com site, however.

Presuming you've successfully installed gmax (AND the help files and tutorials), as well as (obviously) FS-X and Acceleration:


#1 Install the FS-X SDK from the FS-X Deluxe disc. This must be done first.

#2 Install the SP1a and Acceleration SDK updates (I believe included in the Acceleration disc).

Note that the actual gmax GAMEPACK needed with which to model for FS-X is included in the SDK Sp1a update, and NOT in the initial installation of the FS-X SDK.

When modelling for FS-X, you WILL start gmax with the FSX_gmaxGamepack startup icon provided with the gamepack, not with the default gmax icon.

--------------------------------------------------------------------
Notice that you haven't even started any modelling yet.


(The following assumes you have zilch, zero, none at all, experience with gmax/max modelling)

With all that set up, go through ALL the gmax tutorials that come with gmax (again, the Help and Tutorial files are individual executables, installed separately from the gmax program itself). This is important so that you can get the feel of the program. Gmax is a powerful modelling program, and has more features and capabilites than FS-X uses, but it's important that you learn how to handle the program.

Play with the program and once you've completed the tutorials, come back so we can confuse you even more.

The VANS aircraft are fun to model. There are several FS models out there, done in a variety of programs. They are simple enough that one can create reasonable facsimiles quickly, but complex enough to really learn modelling.

From the RV-4 to the RV-9, they're conveniently similar that you can reuse some of the bits and pieces from one to the other, less so to the RV-10. I believe that the RV-12 is a whole new design, with no commonality to the others.

Enjoy, and welcome to the madness.
 
Hi Felix,

Thanks for the information, I guess I have a lot of playing around to do first....... It's gonna be fun, I'll report back soon ;)
 
I recommend that before you actually start building the planes, you start with an easy thing. Put a spere into the landscapem and let a cube fly. Getting all these simple steps together you will learn a lot.
 
I decided to hold off on jumping into GMAX, and instead started modelling in FSDS 3.5, I decided on the RV-8a. Here is what it looks like so far:

RV8.jpg


Any advise is welcome, criticism is welcome.
 
fsds

fsds is great and quick, i have switced to gmax which is driving me crazy,
the fsds tutorials are a must, if you have good three view bitmap backgrounds, load and scale them,add a tube and save, next time you load,you will get the accurate bitmaps plus tube,delete tube.leaving accurate bitmaps to model parts, save each part in parts.next time you fire it up load your original bitmap plus tube, delete tube, and load individual parts, fsds will put them back where you placed them, carry on modeling.

always retain original project scaled bitmap plus tube for future use, dont overwrite this one..

use the hide selected, to avoid moving points you dont want see or move.

use the constrain to move only in one or two axis.

when ime mod a fusalge, i select a tube,add or remove sections to get them in the right place,where shapes change section etc, then switch to point, and select all points on tube, use constrain and move equally,i dont move any individual points unless i have to, as this is where your nice smooth fusalage starts to become lumpy...watch out for fix non planar polygons,,this will turn your nice smooth fusalage into porridge, it sees the polys in three dimensions..

fsds allowes you to test your aircraft in fsx,try it with what youve got so far, its hilarious watching an object with no wings or undercarriage fly just like a finished aircraft...jim
 
Ok noob question time. My RV is coming along nicely...... but I am having difficulty making straight sides. Any advice?
 
Ok noob question time. My RV is coming along nicely...... but I am having difficulty making straight sides. Any advice?

Post a wire frame of where you're at in the modelling and what you're trying to do.

(Yes, Arno, Fr. Bill - I *almost* told him to select the polygons and click "flatten" before I realized this is FSDS.)
 
Hi again,
I kicked FSDS to the side and started using gmax, I have lost count the number of time I have restarted the fuselage. Here is what I have done so far. I now need to figure out what to do next.

RV8crosssection.jpg
 
Presuming you created the splines in order (front to back or back to front), (and they are editable splines) select the first one, and attach each succesive spline in order.

Add a Cross-section modifier

Add a Surface modifier....




Hi again,
I kicked FSDS to the side and started using gmax, I have lost count the number of time I have restarted the fuselage. Here is what I have done so far. I now need to figure out what to do next.
 
Ok, I added the cross section modifier as well as the surface modifier, why does the fuselage look twisted, how do I fix it?

RV8-1.jpg
[/IMG]
 
Last edited:
Every spline object must have the same number of vertices, and they must all have their first vertex oriented along the same vector...

...otherwise you wind up with a twisted mesh such as what you've captured in your screenshot.
 
.... and that "27" steps??? That basically inserts 27 sections between each spline and 2 points between each "base" point....
 
Back
Top