• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Object Placement Tool

Messages
306
Country
unitedstates
When using object placement tool, I want to place a AI Aircraft.
Once I place it how do I move it around nothing seems to work????
 
I don't specialize in this department, but I'm pretty sure you can't place AI traffic with the OPT. It's just for scenery objects. Then again, I could be wrong. And you said you can't move the object around when you place it? Mine works just fine moving objects. :confused:
 
You can not use the OPT to place the ai aircraft. I havent messed with AI in some years so this is from memory and thus may be lightly flawed, if anyone catches it, please correct it.
AI Aircraft are called from the AI code that contains the flightplan. The aircraft will appear in set areas when the time comes, per estimation based on your current grid. This next part I cant remember 100% and may have errors, but if you have an aircraft scheduled to depart at 8pm, and it is 5pm, the aircraft may not show, unless the apt you are at also has a plan terminating at the airport at a given time.
The best place to get AI answers is in the SDK or
http://www.fsdeveloper.com/forum/forumdisplay.php?f=109

That is the AI dedicated thread. Browse around in there and I am sure you will find your answer, and not rely on my memory :D.
 
You can place any FSX object with the OPT.
AI or "real" plane it does not mater anyhow.
BUT: don`t expect any behavior other than a static object.
It is placed at that location. Period. :-))
Moving that stuff around: See the SDK manual, or any mission making software, or any AI software.
Most propably the mission stuff is much more easier to get those things moving around.
AI stuff is not that complex to learn, so one might give it a chance. _))
 
Last edited:
BUT: don`t expect any behavior other than a static object.
It is placed at that location. Period. :-))
Moving that stuff around: See the SDK manual, or any mission making software, or any AI software.

thats how i meant it, you cant do AI actions with the OPT.
 
You can place any FSX object with the OPT.
AI or "real" plane it does not mater anyhow.
BUT: don`t expect any behavior other than a static object.
It is placed at that location. Period. :-))
Moving that stuff around: See the SDK manual, or any mission making software, or any AI software.
Most propably the mission stuff is much more easier to get those things moving around.
AI stuff is not that complex to learn, so one might give it a chance. _))

thats how i meant it, you cant do AI actions with the OPT.

I can place the plane ,but it comes on upside down ,nose in the ground or the right way; but wheen I save and go back in not there.
I understand about not using it for AI traffic just wanted some of my on planes at my Airport.
Will keep trying

Thanks
 
Hello,
If I understand correctly.
You just want some "static" to populate where you are.
-
So we talk about "static" not AI.
It's not the same.
You have a lot of possibility to do this.
-
If it 's on an airport you can use ADE and its library.
You easily can also add your own model/BGL (thanks to Arno).
See the wiki and ADE (Airport design editor) forum.
-
Just be careful...
We all begin with adding just a plane.
We are all now with working on whole airport and much more ...
-
Addictive ... ;-)
-


Daniel.
 
I can place the plane ,but it comes on upside down ,nose in the ground or the right way; but wheen I save and go back in not there.
I understand about not using it for AI traffic just wanted some of my on planes at my Airport.
Will keep trying

Thanks

As for the direction of the object, you can load and make orientation changes in MCX (If this function is not available in MCX, my bad Arno, but its a good idea for the tool if not already there).
If MCX does not allow orientation, then export the object to dae, gmax or similar format to make the axis changes in another program (see notes for doing this in sketchup).
You need to set the object flat on the ground, then convert to fs mdl, bgl or library object and then just change the alt and heading to your liking.

For aircraft, I set the altitude of the object to be level with the landing gear. So the nose gear will always be 0 0 0 and a true north heading in my plane (plane/field/grid as in not aircraft) then just put the heading and set to airfield altitude and thats all i have to do.

NOTE: In Tremble/Google sketchup, you can not modify the original axis of the model. If the object was created with another tool such as GMAX, it will import the original axis grid of the model as it was when exported from Gmax or MCX. (IDK if this is still true in SKP8 as havent tried it, but it was in SKP7) If the model was created with the Z axis as a horizontal axis instead of vertical (for more on AXIS and its relation to Sketchup, see Note 2), then you will need to use the rotate tool to make this correction, as the axis gizmo will not make the changes needed to correct orientation.

Sorry, started to get a little off topic but its relevant.

Note 2: Axis of orientation are dependent on the program, as some use them differently, Z is normally the vertical, with X and Y being horizontal. On a compass before moving, north/south is typically the Y axis, east/west typically X. in 3d Z is the altitude/height above/below 0 plane, Y is usually the right-left axis, and X is usually bottom-top, but as said it depends on the program, as I have seen it shown and worked in different ways and applications.
Sketchup uses colors to identify Axes, Blue being the Z or vertical variant, green being Y axis running North-South, and Red being X axis running East-West.
So if you load into sketchup and the aircraft fuselage runs with the blue/z axis, you need to rotate it.
 
Last edited:
Back
Top