• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Problems at default KABQ

that,s what i see in v1.50 Jim, although a different colour yellow
it seems I'm now not seeing this in v1.55 and v1.61 for some unknown reason
i wonder why you see them ok and i and others don't
 
Last edited:
Ray

I see a portion of the scenery with Ver 1.20 but no black boxes. I see all the scenery with ver 1.47, 1.50, and 1.61 as per the picture. I never used 1.55.

Like Jon said, it is possible that ADE was updated with the Accel scenery database (which I have for some reason) but something changed and the data being held in ADE is now pre Accel for some users.
 
Ray. Since users can edit and update the library object database it is entirely possible that the ones in your older version are different than the current one. I have no control over that.

However. Go you your 1.61 version and make a safe copy of adeObjectList.dat (I assume this is for FSX so go to the one in the FSX sub folder). Now go to your 1.50 installation and copy the adeObjectList.dat from there to 1.61 and start ADE again. See if you now have the extra objects.
 
OK - here is an update on how this works. There are two databases for objects in ADE. It is a while since I looked at this and I should have checked earlier. I think I referred above to the fact that there were two. The one that I think has gotten out of date is called modelList.dat It is not user editable and it contains all stock objects including the autogenerated ones. It is dated Nov 1st 2009. I think what is happening is this:

  • City specific library objects like those updated with the Accel pack are not in there.
  • The OBX files changed by the Accel pack are there but not updated
  • Some extra city files are not there
As per my previous ramblings I did implement the system that I thought I did. That is the adeObjectsList.dat file contains objects that users can place in their projects. The modelList.dat contains the other stock objects that generally users should not try to place (autogenerated objects are geo-locked so not good candidates to be re-used by the average user).

I think the answer to all this is actually simple and down to me. I will generate new modelList.dat files for the next update.

Also please don't load OBX files into the LOM - that is not the way to do it. If you must work with those black box objects before I do release the update then load them but once the update is made then please remove them from the LOM.

I can't explain why some folks might have no black boxes unless OBX files have been loaded into the LOM.

Sorry it has taken me a while to remind myself of what I should have remembered all the time :oops:
 
OK folks please try the attached file. You need to replace the 2009 dated ModelList.dat in the ADE FSX folder with the one attached.
 

Attachments

This up dated ModelList.dat works fine,i have now for EDDI the same picture as Jim JVILE,i can see all the buildings in yellow.

Jan
 
Thanks Jan. It seems that changes in different versions of FSX are not properly represented in the ADE models database.
 
OK folks please try the attached file. You need to replace the 2009 dated ModelList.dat in the ADE FSX folder with the one attached.
Jon, done that and taken out the OBX files from my LOM. Opened my KEYW (stock and my modified version) and black boxes have returned? I noticed in the new ModelList.dat file that only 2 objects are listed for OBX26230 whilst, when I put this file into the LOM, it reports 11 objects. Put OBX26230 back into LOM and black boxes disappear.
Any thoughts please.

EDIT
just opened up KABQ and that seems OK now and I haven't added OBX19190 to my LOM.

EDIT
just looked at OBX19190 - ModelList.dat lists 33 objects and LOM registers 33 objects so I suspect the new ModelList.dat is missing some entries from OBX26230.
 
Last edited:
OK - I am working on making the stock database scanner accessible to users again. This means that if you get black boxes in a stock airport then you can re-build the databases to take account of what you have in your specific set up. My tests here result in no black boxes at any airport I have tested other than TNCM. I will check that the scanner is reading all the stock folders it should. So the final solution - I hope - is to allow users to rescan when black boxes appear in stock airports.

I will repeat this in the release notes but this DOES NOT update adeObjectLists.dat (the LOM database) but it does update the models database that should have all those autogenerated and city specific objects in it.
 
Ray. Since users can edit and update the library object database it is entirely possible that the ones in your older version are different than the current one. I have no control over that.

However. Go you your 1.61 version and make a safe copy of adeObjectList.dat (I assume this is for FSX so go to the one in the FSX sub folder). Now go to your 1.50 installation and copy the adeObjectList.dat from there to 1.61 and start ADE again. See if you now have the extra objects.

Jon, yes FSX.
Tried that and sorry to say no change, black boxes remain, although the file from v1.50 is larger
 
Last edited:
Not tried the one you uploaded, i backed up the modelList in v1.61 then i copied my ModelList.dat from v1.50 over to it which is nearly a MB larger at 2.75MB
and it now works, no more black boxes!!!
I also copied it to v.1.55 and that one is ok now, except at KEYW for some reason which is also missing in v1.50
I take it this one will be ok to use as it's a lot larger than the one you uploaded, my one does have many of the xxx\Scenery\OBX.bgl's in the list?
 
Last edited:
Ray I suggest waiting for a day or so. I am preparing a release that will allow you to re-create the databases based on your actual installation. You can use the one from 1.50 - not sure why it is there in your case since I don't have it in my 1.50. In any case ADE will update the databases for you in the next release and they should have all the stock models relevant to your setup.
 
Back
Top