• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

question about 2D panel

Messages
118
Country
israel
Hi

the parameter size_mm=640
efects only the size and location of the instruments or also the quality?
I mean if I have a background of width: 1600 px, shuld I use 640?


I have background BMP of width:1600 px, height px 900 px,
this BMP is for use on wide screen.
My question is if I sould stretch to 1600:1200 px or is there another way to build wide screen 2D panel?
 
The background is usually 1024mm for default 2D panels.

i suggest using 2048mm or 1024mm

From there FSX will stretch the 2D panel to fit the screen.

Less than 1024mm for background will not look good!

My 2 cents
 
Last edited:
Well, that's the point; we don't want the sim to "stretch" the 2d graphic at all...

So, build the 2d panel bitmap the precise resolution you want, as long as it is 16:9 ratio.

I use 1280x960 for all of my regular 4:3 ratio 2d panel background bitmaps.
I use 1680x1050 for all of my wide-screen 2d panel background bitmaps.

Code:
//--------------------------------------------------------
[Window00]
file=Main_Panel.bmp 
file_1024=Main_Panel.bmp 
size_mm=1680,1050
window_size_ratio=1.000  
position=0
visible=1
ident=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000


gauge00=ES22TXgauges!Annunciator,  114,448,95,331
gauge01=essr22avidynesTx!PFD,  235,342,682,543,PFD MAIN
gauge02=ES22TXgauges!Magneto_Switch,  1,755,130,173
gauge03=ES22TXgauges!Slant Electrical_Panel_G3,  -129,912,1030,151
gauge04=ES_XMLSound!ES_XMLSound,  8,657,1,1
gauge05=ESGN430!ES_GMA340Hi,  1170,1002,473,96
gauge06=ESCirrusSR22!wincontrol_AP,  9,363,100,124
gauge07=ESCirrusSR22!wincontrol_OVHD,  1540,215,100,99
gauge08=ESCirrusSR22!wincontrol_compass,  1541,921,129,57
gauge09=ESCirrusSR22!wincontrol_ANUN,  843,953,35,84
gauge10=ESCirrusSR22!wincontrol_ANUN2,  929,1001,81,48
gauge11=ESCirrusSR22!wincontrol_THROTTLE,  1045,1003,100,46
gauge12=ESCirrusSR22!wincontrol_RADIO,  1173,985,61,40
gauge13=ESCirrusSR22!wincontrol_Preflight,  225,224,164,89
gauge14=ESCirrusSR22!Viewpoint,  722,  195 ,467,100
gauge15=ESCirrusSR22!N_Registration,  1,683,105,34
gauge16=ESCirrusSR22!wincontrol_ADF,  1246,919,250,60
gauge17=essr22avidynesTx!FD and AP switches,  161,372,56,95
gauge18=essr22avidynesTx!MFD,  978,343,675,537,MFD MAIN
 
If it is 16:9 ratio, can't you just use
size_mm=2048

and it will stretch even if you have a second entry. i am nor sure just asking? Because a second entry makes no sense for a full screen to me. Although i don't make backgrorund 2D panels.

To me this will be better quality and fit multiple screens. just my thoughts!

Although i did make a 2D pop up panel and a customer with 3 screens had issues.

So i changed the format to 1 entry or 2 entry's like you posted. But i forget which change i made at the moment....I need to look at my project later on.

Maybe you can clear this issue up for me Bill! Why did this customer have an issue? Any ideas what i did wrong the first time on my pop up screen!

I might want to pick your brain on this one. Seems i am a bit confused now! So can you explain why 1 entry or 2 entry's???
 
Last edited:
The first entry is "legacy" from earlier versions that allowed one to have two different sizes of 2d panel bitmap; one low resolution and another full resolution. In the "old days" 4:3 ratio monitors typically had either 640pix width, or if they were high resolution 1024pix width...

In other words:
  1. 640x480 (lo res)
  2. 1024x768 (hi res)
The two entries are identical because we want to spoof FS into using the full resolution bitmap at all times.

No, the 2d panel system will not support 2048 at all...

As for popup panel, until and unless Ed Struzynski (the author of FSPS) adds support for wide-screen monitors to his program, we are forced to hand-tweak the size, height, and width of all popup panels ourselves so that when displayed in the sim they will have their actual dimensional ratios preserved...

...after years of practice, I've gotten pretty good at "guesstimating" just how much to narrow the 2d popup panel's width for any given height. Now it usually takes only two or three adjustments before I'm satisfied. :D
 
Last edited:
Back
Top