• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Scenery Design

Messages
21
Country
unitedstates
Hey guys,

So I want to get into proper ground polygon work and I'm not really sure where to start. I've tried some tutorials back in November but could never get it to work properly. I was able to get the textures onto the ground but ran into multiple issues. I would like some opinions on where you started at if you are successfully designing scenery now, I know all the basics like blend masking and water masking etc but would like to get into ground poly work.

Thanks.
 
Hi,

Not sure if you are not mixing up photoreal ground with ground polygons.
Start off with an add on airport and add a photoreal ground that is resampled into a bgl. Activate the scenery you have made.
Then apply ground poly using (either ADE or GMAX/3DS/Blender based) models and add them to your scenery.
If using ADE then that is it because it is already converted into bgl's when you compile the airport. If you use one of the other options you will have to compile it yourself. MCX can help you there.
A bit more info of what you know or do not, would help.
Cheers,
 
Hi,

Not sure if you are not mixing up photoreal ground with ground polygons.
Start off with an add on airport and add a photoreal ground that is resampled into a bgl. Activate the scenery you have made.
Then apply ground poly using (either ADE or GMAX/3DS/Blender based) models and add them to your scenery.
If using ADE then that is it because it is already converted into bgl's when you compile the airport. If you use one of the other options you will have to compile it yourself. MCX can help you there.
A bit more info of what you know or do not, would help.
Cheers,
I have made a photoreal ground texture and resampled it into a bgl. I have an airport with the default runway laying ontop of photoreal scenery. What I want to do is remove that default runway and make my own taxiway & runway ground polygons.
 
Hi again,

Tks for the info.
I give you a biased way of doing things;) because that is what I am using and so it is not the bible:eek:.
In your case, I would use ADE which IMHO is the easiest way to do it.
Load your default airport in ADE, move the runway to where you want it and start adapting the taxiways and parking spots to coincide with the photoreal. Make sure you make the taxiways as apron paths (green links not the blue ones).Then start working with the ground polygon editor and overlay the taxiways, the aprons and runway with your own textures.
Save and compile, done:).
Once you have become proficient in doing that, you can think of more things to do using other more complex to use programs.
 
Hi again,

Tks for the info.
I give you a biased way of doing things;) because that is what I am using and so it is not the bible:eek:.
In your case, I would use ADE which IMHO is the easiest way to do it.
Load your default airport in ADE, move the runway to where you want it and start adapting the taxiways and parking spots to coincide with the photoreal. Make sure you make the taxiways as apron paths (green links not the blue ones).Then start working with the ground polygon editor and overlay the taxiways, the aprons and runway with your own textures.
Save and compile, done:).
Once you have become proficient in doing that, you can think of more things to do using other more complex to use programs.
Appreciate your replies very much :) I will go ahead and do that then and we will see how it turns out. Hopefully I can start using gmax/blender in the future.
 
Ground polygons outside of ADE are a bit of a dense subject, there is no start to end guide that sums it up easily. You will make the model itself in 3DS Max or gMax. There are a lot of styles, which are all down to the individual developer. Here is a quick idea of how I tend to do them:

-base tile layer - this is usually photoreal imagery sliced into 1024px sheets and laid onto polygons
-detail layer - a more fine-grained asphalt/concrete texture that is semi-transparent and lain on top of the base tile layer. You could do this either with real detail mapping via material settings or making a new polygon layer and a semi-transparent texture
-lofted splines - taxiway lines, runway markings, other paint
-dirt, grime, and ambient occlusion baking if applicable

Once you've got some of that working, you export the MDL file and run it through ModelConverterX to assign layers and take care of some other little steps. If you're making a native Prepar3D ground polygon the procedure is roughly the same but check the SDK for information on z-bias settings in lieu of normal ground polygon layers.
 
I think you need to find tutorial about mapping texture in Ytube. You need to learn a bit about that which I do not include in my tutorial. It is a basic need in Gmax/3dsmax. There are a lot of tutorial about this, just google for mapping texture in 3dsmax.
 
It seems to be a flatten problem. Ground poly needs to be on perfectly flat surface. You can use ADE to flatten the surface.
 
It seems to be a flatten problem. Ground poly needs to be on perfectly flat surface. You can use ADE to flatten the surface.
I seem to have trouble following you on part 2 of your tutorial, what resolution would I use for the edge lines if my regular asphalt texture is 1024x1024? And also I seem to have a very hard time following you on the "making edge" part. I don't know what you did and I'm not sure what you meant by "You need to measure the width of the taxiway edge from the reference plan.". Everything up to this point was fairly easy for me.
 
"You need to measure the width of the taxiway edge from the reference plan."
There is a tool in Gmax/Max called "Ruler". You need to use it the measure the width the edge so you can make a template to make LOFT of the edge.
 
There is a tool in Gmax/Max called "Ruler". You need to use it the measure the width the edge so you can make a template to make LOFT of the edge.
I don't have a ruler tool with my version of gmax, I looked everywhere. Also can't seem to select the taxiway edges with edge selected on editable poly.
 
Sorry, it is called "Tape", not ruler. As this figure.

cats.jpg
 
Back
Top