• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

SSD Hard Drives

Messages
10,163
Country
us-arizona
Hey all,

Just a heads up. In case any of you are looking at getting a new computer soon and money isnt an issue, you might look into getting SSD Hard drives for it. I highly recommend them.

Your computer bootup time will become something like 6 to 13 seconds. Your bootup time for FSX or P3D will suddenly become 10+ seconds instead of 5 mins, especially if you just ran FS, in which case the data is already opened, so rebooting that will take fewer seconds.

When you save a massive, layered PSD file, which on my older computer took about 15 seconds (one thousand and one, one thousand and two, etc), it now happens in the blink of an eye with the new SSD hard drives. The little circle for Windows 7 showing 'save in process' is a quick 'flash' and its saved. Same with massive Max and Gmax files. Blip, done, saved....

When you get an SSD HD, they are expensive, though some places have come way down on prices, like Frys Electronics here in America, as well as NewEgg.com. 256 Gig SSD HD's by SamSung, model 840 series, are supposedly the best. Two of them are just a bit thicker then a laptop hard drive, so you can easily put 2 SSD's in a single 'full size hard drive area in a large computer. The SSD's by SamSung are quite small.

Note; Make sure you get fast Read/Write speeds. 500 by 500 is best, 500 / 100 is grim. You want to be able to save ultra fast, so aim for at least 400 Write speeds. The sim will also run much faster.


I presently have 3 SSD's in my rig, as I had 3 SATA links in the Motherboard. One is for sims, one for Windows, and one for data such as Photoshop files/textures/PSD files, Max data, etc.

Probably what I'll have to do if I need to reload windows is disconnect the secondary HD's before reloading Windows on the primary SSD, as wiping an HD will result in all HD's getting cleaned in the system network (directly linked HD's).


So, just a heads up. I thought I would share this bit of trivia. I wish they had more affordable SSD HD's by now. 400 Gigs will cost you quite a bit, and a 500 Gig is perhaps $500.00 or more. I think I paid between $200.00 and $250 for the SSD HD's I got, but they are the best that SamSung make that were in stock that were what I thought affordable. I also wanted to separate sections for data/sims/Windows.

Fast... Blip! Done....


Bill
 
When I was first sold on SSD's, it was when I got a new laptop, months ago. A new Vizio ultra book. 256 Gig SSD HD. When I booted it up, it was like 6 seconds. Still is. I was utterly gobsmacked (I believe the Kiwis would say). The speed is just not believeable, even when you are watching it happen. My older laptop took min's to bootup. This... 6+ seconds.



Bill
 
I wish they had more affordable SSD HD's by now. 400 Gigs will cost you quite a bit, and a 500 Gig is perhaps $500.00 or more.

I bought a couple Crucial 256 Gb M4s about a year and a half ago, I think they were $450 ea IIRC so they must be coming down somewhat if you can buy a 500 gb for $500. I agree, SSDs are awesome, the Win7 welcome screen just blinks, you hardly have time to read it. I puzzled over whether to go with a Raptor/RAID setup or spring for the SSDs when I built this thing, I had some trust issues with these newfangled solid state devices, but I sure am glad now that I chose the SSDs, they have been just wonderful.

Regarding space, I use a 1 Tb WD conventional HD for general storage, backups, and things I don't access very often. It's SATA 3, so it isn't exactly slow, but much slower than the SSDs. Cheap storage, I think it was around $100 bucks is all.

I used to think my old Athlon XP machine was fast, it had two conventional IDE hard drives on RAID 0. It was fast compared to some of the ancient computers I had to use at work, or some of my friend's machines, but after using this new one for a while it's pretty painful whenever I have to get back on the old one for any reason!

Jim
 
I am definitely counting with at least one SSD drive when the time comes to build a proper, tower computer.

Right now I am stuck on budget laptops... :(
 
I'm on the lookout for a couple of SSD drives.

Hopefully they'll be more robust and dependable than the three 1TB Seagate drives that failed utterly within days of each other...

I keep one of the dead 1TB Seagate paperweights on my development desk now to remind me to never, NEVER buy any of them again! :mad:
 
I am a solid SSD convert, having put them in almost every computer in the house now (including a few older Macbooks that have a new lease of life)

I pulled out the FSX Velociraptor RAID array from my Dev computer and replaced it with a SATAIII card and Vertex4 512Gb SSD. Awesome.

Also, the original Main C: setup had a pair of 64Gb Micron drives in RAID0, but I get better performance and more reliability now having swapped that to a single OCZ Vertex3

SSD as the main drive is a must IMO. In addition, as a standalone for FSX, it is fantastic.

I have a 2tb WDC RE4 drive for "storage"

Have heard some positive things about Hybrids for eaking a bit more space , but I am sold on the SSD concept.

No-brainer ... every computer I buy/make fro heron out will have them.
 
Last edited:
I'll never forget getting home and getting everything out to assemble into the tower. I picked up the SSD HD Samsung boxes and thought they were empty! I freaked out. I just paid a ton of money for empty boxes! Opening them up to double check showed they were indeed in the case, snapped into neat plastic holders. The HD's have a jewel like casing, polished beveled edge like an iPhone 5 has, and very very small, like a business card case. And lite! Very lite. Almost crazy lite and small.
 
Does the software that seems to come, or at least optionally, with these drives work well at transferring data (especially the operating system) from your old drive? From what I've heard it is pretty strait forward, but it seems a little daunting.
 
I used Acronis Home recovery for the system drive.

The non-System drive can simply be copied using the existing folder structure, and then changing the drive letter afterwards.
 
I just built a new PC...all spec'ed out with FSX in mind.

Win7 lives on a Samsung 830 128gig. Boot times are heart stopping to say the
least. FSX lives on a WD Raptor. In hindsight I wish I had spent the extra $80
and gone with a 256gig SSD for FSX. Don't get me wrong the Raptor has FSX
running beautifully but with the Black Friday sale prices I should have taken
advantage.


Ken
 
Back
Top