• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Star Wars Models

Messages
14
Country
spain
Hi, this ist my firts post here, i make repaint`s for default planes of FSX, make AFCAD files for Spanish airports, and now, i make models ai, for FSX

I find many free 3D models of ship`s of Star Wars, and i export and release, the Imperial Destroyer, and Rebel Flett, all models, for use whit AiCarriers.

But, now, i have, the TIE`S Fighters, and Tirydium shuttle, and Coreillan Corvette, to make flyable, whit VC incluyed.

This model`s, dont have animations, and not know how to create them.

Would you be willing to share the models, with someone, you know, and can perform and release them for FSX.

Regards!!

P.D. sorry for my English, I used Google translator.
 

Attachments

  • 2013-5-12_1-17-30-578 copy.jpg
    2013-5-12_1-17-30-578 copy.jpg
    513 KB · Views: 2,142
  • 2013-5-15_20-40-16-111.jpg
    2013-5-15_20-40-16-111.jpg
    149 KB · Views: 1,357
  • 2013-5-25_2-1-49-825.jpg
    2013-5-25_2-1-49-825.jpg
    245.2 KB · Views: 1,061
Last edited:
For my, ist very hard animate, i work in the models whit 3DS MAX 2012 and Export whit ModelConverterX, I`m not success.

The Imperial Destroyer, It`s release for use whit AiCarriers mobile ship.
 

Attachments

  • 2013-4-23_23-59-9-85.jpg
    2013-4-23_23-59-9-85.jpg
    114.3 KB · Views: 937
  • 2013-5-12_1-18-34-954 copy.jpg
    2013-5-12_1-18-34-954 copy.jpg
    623.9 KB · Views: 727
  • 2013-4-24_1-3-2-470.jpg
    2013-4-24_1-3-2-470.jpg
    121.9 KB · Views: 640
Its terribly easy.

* Click on the part
* Turn on Animation mode
* Animate the part from zero to 100 or what ever the amount is needed for the animation. (Usually its 100, or 50, or 360). Then turn off Animation mode when youre done.
* Turn on Animation Manager in Aces Tools (top tool bar)
* Enter in number of key frames into the two slots/windows for the Animation Key Frames, such as zero through 100
* Make sure your part is in the object selection window (name of the part)
* Select the Animation you need from the list of animations, such as exit, folding wing, etc
* Click 'Create' and you are done.

Export a model and check it in FS.


To see how many frames an animation uses, go into the Modeling folder in the SDK, open the 'bin' folder. There, open the ModelDef.xml file with Notepad. Make sure you do not mess it up. Make a copy to be sure you have a backup. Then look for the name of the animation you will use with 'Find' (control - F). Then look up the animation frames it will travel. Switches are usually 50. Normal animations are 100. Some odd animations are 75, 360, etc.


If you need to create some animations, let me know. I'll help however much I can. I am not the best, but know a little bit.


That is a brilliant looking blockade runner!



Bill
 
Last edited:
Hi Lionheart, thank you very much for your interest and support, If you want, I send you the models that I have.

Regards!!
 
I would be honored, however I am totally loaded down with all of my own projects. I wish I could. I need a big team of people with all that I am doing.


Bill
 
Ok, The honor is mine, that you can help a neophyte as me, even so, they are sent, if you want to take a look,

I send a e-mail, whit the link of the download.

Many thanks and kind regards!!
 
If you want to know how to do simple animations, just Google a Youtube video on "3ds Max Keyframe Animation" and you should find a walk-through suitable for your needs. Just like Lionheart said, it's terribly easy. Once you know how it works, you'll catch on fast. ;) Like I say, "just keep plugging away and something good ought to happen." :)
 
Hi, i try animate, but 3ds max, have many options, and its very hard to understand for my, Also, my English is not very good.

Many thanks anyway.

Regards!!
 

Attachments

  • Untitled-1.jpg
    Untitled-1.jpg
    86.1 KB · Views: 603
Hey EC,

Lets say you wish to animate 'one' of those wings. (You can only animate one at a time).

* So, select the wing, place the Gizmo to the center line of the turning axis of the wing where it pivots from. Turn on Animation mode. Rotate the wing from 'nomral flight position' (at point zero) to folded position at point 100. * * Turn off animation mode.
* Next, at the top where it says AcesTools, click that.
* Click on Animation Manager.
* Enter in first and last Animation key frames numbers; zero and 100.
* Make sure the wing/foil is selected in the part/object window
* Next, in the list of animations available, find wing_fold_left or wing_fold_right.
* Click 'Create'
.. done...
.. test....

Export the spacecraft
compile into MDL format
Place in simulator

Go into the 'aircraft.cfg' file, opening it up with Windows Notepad
(This step is only needed with folding wings and lots of doors).
Paste in this entry somewhere down in the entries in the config;

[folding_wings]
wing_fold_system_type=1 // Available
fold_rates = 0.25,0.20 // Left,Right: 1/sec

boot up the sim
Make sure 'Wing Fold' is active in a key on your keyboard in the 'controls' section of FSX. If it isnt, activate it with something like 'Shift W' or 'Shift F'.
Boot up the Spacecraft and hit Shift W and see if the wing folds up. It should.


You can animate the doors, antennae dishes, landing gear, people moving inside. It can really make your work come alive and its REALLY not hard. Its so easy. Just take a moment to learn how its done and you will thank us immensely.


Wingfold is a little trickier then others as you need to make that entry in the config and make sure that the keyboard has access to that animation in FS. I think FSX Accelleration will have the keyboard entry already set, but dont know what it is. Just look in the keyboard controls in Options/Settings/Controls in FS.
 
Hi, I followed the instructions of Lionheart, and got animate, the folding wings, :):):)

but, I could not export the model, It has been closed, and Report next Error:

The models specific in meters, this model is not stored in meters, and click accept, run the exporter, and 82% the exporter, MAX Crash to desktop, unhandled exception in the application :mad:


Regards!!
 

Attachments

  • ALAS-EXTENDIDAS.jpg
    ALAS-EXTENDIDAS.jpg
    177.3 KB · Views: 541
  • ALAS-PLEGANDOSE.jpg
    ALAS-PLEGANDOSE.jpg
    178.6 KB · Views: 540
  • ALAS-PLEGLADAS.jpg
    ALAS-PLEGLADAS.jpg
    181.1 KB · Views: 562
Sounds like the old high memory crash.

Were you able to export this model before before animating it?

Are you using the Prepar3D Export system?

What version of 3DS Max are you using?

What exactly did the crash note say? Can you export it again and take a screenshot of the message?




Bill
 
Hi, i exporter whit MAx 2012 Versión, and used, the Prepar3D SDK,

Today, I have exported, before animate, after animate, I can´t exporter, the crash, only show: exception not controlled for the aplication. and MAX close.

I exporter to .3ds filie, and open whit MCX, and the model, show the wing animation.

Also, I'm back starting from new, due to mismatches in the model mesh.

Regards!!
 
EC-LPZ,

This sounds like the early crashes of the P3D exporter. But.. They fixed it just a few weeks ago, perhaps 3 weeks ago. Is it possible you do not have the latest version of the exporter? The new exporter will not crash.



Bill
 
Correct, i Not having the last version of P3D SDK, but I downloaded now, the last version, Prepar3D_SDK_1.4.4747.0, and can export whitout animation, but, whit animation, allready crash. Undefined system error, MAX says.

I export to .3ds file, whit animation, but, the exporter, have a animation rat...
 

Attachments

  • PRUEBAS.jpg
    PRUEBAS.jpg
    244.2 KB · Views: 633
  • PRUEBAUntitled-2.jpg
    PRUEBAUntitled-2.jpg
    254.4 KB · Views: 556
If you can install the 64-bit version of Max, Prepar3d released a 64-bit set of tools (which work GREAT--I'm never going back to the 32-bit :D). I used to have failed exports and crashes all the time, but *knock on wood* I haven't had one yet. :rolleyes:
 
If you can install the 64-bit version of Max, Prepar3d released a 64-bit set of tools (which work GREAT--I'm never going back to the 32-bit :D). I used to have failed exports and crashes all the time, but *knock on wood* I haven't had one yet. :rolleyes:

Many thanks for the info, for my next PC, i going to the 64 bits, but now, not possible go to the 64 bit, my actual PC, is a six years old, and working whit W7 32 bit.

Regards!!
 
EC-LPZ,

I feel bad for not being able to help you on this. But.... It occurred to me this morning. Did you know you can get Gmax 'free' in the FSX Pro version? With that, you have the ability to export nearly 1/2 million Polygon models. Gmax runs very smooth and you can import 3DS files. They will retain their mappings but not animations.

Gmax is nearly the same as 3DS Max but without the newest tools nor without the renderings. Its a basic version of Max, so you would be right at home.


You would need to get the pro version of FSX on CD's, not the online verison.
 
Thanks sou much, Lionheart, i have original FSX and Acceleration expansion, in box version, that DVD are GMAX?

Also i downloader, blender, but I think mas are difficult to understand that MAX.

I will try to buy the 2011 version of MAX, Because I will also serve to develop objects for Train Simulator 2013, Since I'm creating a Spanish route, and we must create buildings and stations.

Does it work well MAX 2011 with P3D plugins?

Kind regards!!
 
Yep, Gmax is in the Misc or Extras folder in one of the DVD's. Its almost just like Max and has a very good exporter. You can bring all of your Star Wars models into Gmax and export them nicely.

There should be no problems with exporting if you do things right.


I don't think you can get Max 2011, but you can get 2014 and purchase also the additional Subscriptions package that allows you extras, and you can request the Max 2012 version. You can get 3 years back on the 'Subscriptions'. I don't know if you can get 2011, you can request it and see. They usually say no, but if you cry loud enough, they may grant it.


But, its $4,400.00 USD, and Gmax is free. So take your pick.
 
Back
Top