The corrected 'aircraft.cfg' Collection Thread

[12bPilot]

The PA A380 will be included in the next version...

Here's the data

[Project Airbus:PA380]
exit.0 = 0.2, 97.44, -9.55, 3.24, 0
exit.1 = 0.2, 64.84, -11.65, 3.24, 0
exit.2 = 0.2, 49.94, -9.55, 11.94, 0

 

[solwell]

I'm looking for some help with Virtualcol Crjv2 collection. All three models need edited exit info to work with SODE. The Crj200 doesn't work at all.

 

[lot994]

SODE VDGS - SimObject Display Enigne, add E175-195v3
maybe someone have any experience how to add E175/195 to SODE VDGS? I get always the STOP FAIL message as soon as I start activating VDGS this message appears, after a few seconds the whole VDGS goes off..


edit
I found solution, change in aircraft.cfg atc_model=E190 -> it work

 

[danirich]

Hi guys, i played around with the Aerosoft A330 pro, the jetways were originally stopping about half a metre from the top of the door, this is what i feel is a corrected version with the jetways now completely covering the doors and the floor pretty much matching the bottom of the door:

[EXITS]
number_of_exits = 9
exit.0 = 0.4, 83.2, -8.2, -0.6, 0 //PAX LEFT FWD1 25.35m, -2.5m, -0.18m
exit.1 = 0.4, 83.2, 8.5, -0.6, 0 //PAX RIGHT FWD1 25.35m, 2.5m, -0.18m
exit.2 = 0.4, 70.9, 5.2, -6.8, 1 //CARGO FWD 21.6m, 1.575m, -2.125m
exit.3 = 0.4, -43.2, 5.2, -6.9, 1 //CARGO AFT -13.18m, 1.595m, -2.093m
exit.4 = 0.4, 44.0, -9.6, -0.6, 0 //PAX LEFT FWD2 13.42m, -2.8m, -0.18m
exit.5 = 0.4, -64.8, -7.8, 0.0, 0 //PAX LEFT AFT -19.76m, -2.375m, 0.00m
exit.6 = 0.4, 44.0, 9.2, -0.6, 0 //PAX RIGHT FWD2 13.42m, 2.8m, -0.18m
exit.7 = 0.4, -64.8, 7.8, 0.0, 0 //PAX RIGHT AFT -19.76m, 2.375m, 0.00m
exit.8 = 0.4, -53.0, 4.8, -6.6, 1 //CARGO BULK -16.1625m, 1.467m, -2.024m

Please let me know if this works for anyone else or needs more tuning!

 

[jtanabodee]

Does anyone has default aircrafts exits locations? I have tried SODE on the default A321 and it is not correct. I think all the default ones are not so good.

 

[jtanabodee]

I have put those lines in the AircraftExit.ini. But why SODE cannot detect the rear door and upper deck door of the default 747?

 

[Dominik]

Skyspirit 747-8
exit.0 = 0.10, -12.50, -9.8, 4.0, 0 //Main Pax Door, L1 Door, Main level
exit.1 = 0.10, -55.90, -10.6, 4.0, 0 //Main Pax Door, L2 Door, Main level