Thanks Felix for posting the PDF.
Hey Sandra,
Most welcome. I love to help out any way I can, though sometimes limited, I still love to help and to teach what ever I might know. Its because of others that I was able to learn all of this.
The Spline technique for making a side of a fuselage might appear daunting at first sight, but it isnt. It is actually a very fast way of making a sophisticated shape.
Some side shapes can be cloned and reshaped over and over. You can have squared shapes on one side, and very rounded on the other and make the blends inbetween and it goes much quicker then shaping a cylinder.
The final stage, where I make french curves with Splines to use as background guides for moving the Vertices around could be called extreme, but it really makes a shape more perfect and for me is well worth it. A golden touch for the investment of your time in your work.
Flowing lines is what its about in making proper mesh. Usually always, if you have a jagged line in a mesh, you will be able to see it in FSX as a bump or dent. Making the lines flow, no jagged area's, will keep the shape smooth and beautiful.
EDIT: Note that if you do the 'french curves' route, do them one side at a time, two sides should be all you need, like side and top or side and front. Side is most important. But you must do one first, finish that side, then do the other, such as the front or top. If you need to move things around again on the side, then do it after you have finished the other angle.
A neat little trick is that after you do the side view 'curve refinement', you will then find that on the front or top view, you need only move the Vertices 'one' axis direction, and it will be 'towards' the side view. For instance, you should mainly only need to move the Vertices sideways on a 'Front' view after doing the 'side' view as the front Vertices (front view) will be already aligned by 'height' from when you did the side view refinement. The front (or top view) refinement will simply be matching up the Vertices to the 'side' view refinement. You shouldnt need to move the Vertices in 2 different axis directions.
Also, never try to move Vertices around from a 3D view, always from a side or top or end view. Take breaks from your work also, so that you do not go off in another direction of the shape and lose its direction of looks. You can get carried away and accidentally change the shape of the fuselage, like the nose, instead of keeping it held to what you are making. 'Fresh views'...
Bill