• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

util.dll

Messages
216
Could anyone please enlighten me on what is the function of util.dll in FSX?
And most importantly, what could cause ctd's attributed to util.dll?
 
Not relevant to FSX.

Search goes on...
If anyone knows something, please contribute.
(it starts to be like a Red Cross thing :eek:)
 
'google' FSX util.dll and some links do come up..........
 
Did not manage to find anything substantial in these links though (except that it used to be a more common issue in FS9, related to elevations ?).
 
is the dll corrupt?

Main LatLonFormat Degrees Seconds FractionalLatLonDigits inch of mercury square kilometer percent scaler 2pow23 kgf meter mach 3d2 over 64k kilometer per hour KHz millibar angl32 square meters gph nmile per degree radian Frequency BCD16 centimeters of mercury ratio celsius Watts cubic mile centimeter square kilometers kilometer rpm 1 over 16k mask KgFSqCm angl16 bels Watt pound-force per square inch sq m centimeter of mercury keyframes revolutions per minute liters per hour GLOBALP->vertical_speed meter per second squared mile per hour degrees longitude bars position 16k position 32k inch lbs grad liters degree angl32 ft lb per second knots scaler 128 sq yd liter G Force 624 scaled degrees latitude hectopascals millimeter cu mm grads hours over 10 quart foot-pound nautical miles cubic feet pound scaler 256 cubic centimeter degree angl16 boost psi GLOBALP->delta_heading_rate foot pound cubic foot rounds meter per minute kilogram cubic yard G Force gallons per hour year cu km yd3 position 128 yd2 boost cmHg kilometers per hour atm celsius fs7 oil temp psi fs7 oil pressure meters cubed per second foot pounds psi 4 over 16k per hour meter cubed per second numbers poundal feet per radian pascal cu in newton per square meter rpm celsius scaler 256 degree per second ang16 kgf meters lbf-feet meter cubed feet per minute Kilohertz cubic millimeter atmosphere fs7 oil quantity Bool psi square inches psf nmiles celsius scaler 16k cu m newtons per square meter cm3 cm2 degrees gallon decimile square mile volts minutes per round revolution per minute pound per hour GLOBALP->eng1.oil_tmp square millimeters cubic meters square centimeters slug feet squared cu ft cubic kilometer kilograms per second cubic inch hectopascal meter per second nice minute per round meter more_than_a_half inches of mercury gallons pph ft-lbs yards square centimeter feet per second squared degree longitude GForce Pa pounds scaler 256 decimiles square meter Frequency ADF BCD32 celsius fs7 egt liter per hour kilopascal amp GLOBALP->eng1.oil_prs kilograms meter squared geepound square feet mbars square yards minute meters cubic millimeters meters scaler 256 cubic centimeters cu cm kilogram meter squared round feet per second cubic meter gallon per hour millibars scaler 16 Nm amps meters latitude kilometers/hour cubic yards kilograms square foot millimeters GLOBALP->eng1.manifold_pressure square yard volt centimeters knot radians miles per hour m3 m2 sq mm percent scaler 16k percent scaler 32k third miles pounds position kilogram meter atmospheres square millimeter mbar hour scaler mach newton meter knot scaler 128 degree per second kilogram force per square centimeter square miles number rankine degrees angl32 times millibars cmHg decinmiles sq km km kg hours foot per second squared celsius scaler 1/256 boost inHg mph inHg 64 over 64k cubic miles decibels kilogram per second knots m/s mmHg degrees angl16 pascals millimeters of mercury degrees per second kilometers day second sq in in bel millimeter of water thirds Hertz Slug per cubic feet years Hz millimeters of water square inch days mm3 mm2 feet/minute cubic inches Slug per cubic foot slug keyframe kilograms per cubic meter degree geepounds pound fs7 charging amps kph quarts sq ft half kPa ampere ft per minute psi scaler 16k seconds flags machs kelvin meters per minute mile meter latitude cu yd part psf scaler 16k bar newton meters slugs feet squared radians per second cubic kilometers rpms degrees per second ang16 foot-pounds pounds per hour inches meters cubed radian per second percent millimeter of mercury millibar scaler 16 km3 km2 Megahertz Boolean meters/second sq cm cm MHz slugs minute per round hour over 10 kilometer/hour Slug/ft3 pound-force per square foot feet/second halfs meters per second squared degree latitude decibel minutes feet Slugs per cubic feet Bco16 meter per second scaler 256 farenheit Enum nice minutes per round amperes decinmile ft3 ft2 meters per second scaler 256 in3 in2 meter/second kilogram meters per second kilogram per cubic meter fahrenheit percentage percent over 100 nautical mile foot meter scaler 256 Slugs per cubic foot meters per second yard m ft/min inHg Frequency BCD32 msxml4.manifest M S X M L 4 . D L L
lots of this in it.
 
Last edited:
I have ctd's attributed to util.dll. They seem to happen in a certain area/FIR.
Have no idea if the dll is corrupt, or something (an addon ?) does not play well with it.

Thanks for the Hex editor excerpt. Don't make much out of it.
Seems like a huge list of units of measure (with tables of conversion and formats definitions?).
At some point in the file there is reference to MSVCR80.dll (which also sporadically gives ctd's).
It also looks like it is used to process a string (perhaps METAR ?)
 
DLLExplorer shows that util.dll contains 495 exported functions. Some are identified by ordinals while others have names. As examples there are following groups C++ functions. The first appears to handle aircraft position (LatLonalt) and the second possibly handles a list of arrivals (arrlist). The field for speculation is endless - as is the possibility of erroneous calls!
 

Attachments

  • Capture.JPG
    Capture.JPG
    43.7 KB · Views: 517
  • Capture1.JPG
    Capture1.JPG
    38.5 KB · Views: 444
If you "google" using the two keywords "FSX util.dll" you will find many discussions over the years regarding this error. In all of the cases I've examined thus far, the culprit appears to have been some problem with an addon scenery.
 
If you "google" using the two keywords "FSX util.dll" you will find many discussions over the years regarding this error. In all of the cases I've examined thus far, the culprit appears to have been some problem with an addon scenery.

I have found indeed some, but as said nothing that points to a specific solution.

As it seems that many reported issues had to do with AI traffic files in scenery addons:
if the FSX traffic sliders are set to zero (full left), do the traffic files still come into play?
 
I attach a list of all util.dll's functions for anyone who has the time or inclination to look further into this - though I suspect it would be a futile exercise.
 

Attachments

As mgh already said, a lot of things can go wrong.
It seems that util.dll is a collection of computational routines for zillion things (rather 495) that they are called from many places. This is probably where the name came from (utilities).

For starters, I'll stick to n4gix's advice and check all scenery addons.
 
Back
Top