all the parapharnalia you shall read is necessary that will hekp you develop things leke these without help .the core of the concept will be strong so you can derive any thing.
for developing such things prodeuct like Ez Scenery is must . or you'll never achieve frame rate ....descent frame rate.....and patience becuase it can go as far as filling a chart paper of 1mts.x 1mts. with dots until unfill space on that paper is no more than 10% (collectively) not one [articular end/part/edge.

though i'm not good at explanations and expressions but still try.........
There is something, you would'nt believe , i Follow just one principle in every field of life. "There has to be a First time for everything."
forget polygons counts/polygons with textures, no matter the photoREALISTIC .
example lets take an example of small airport but which is international
what would your impression be for a normal graphic card user with a scenery
.....with TeXture files .....say the set of textures (20 files )with 14 texture file size = 5.48 or say 5 mb each ?
and the Scenery objects are all the most complicated and complex(-est) 3d objects?
your answer will be---- even with graphics card (normal ) on would'nt never get more 8-10 on frames and without graphics card?...................forget it ......hardly 4-5 or may be 6 .
I'd say no
I've successfully found a way to use the most complex 3d object and with everything in detail (not depending on textures to make it look like w
hat to wish to achieve in the end.using textures is the name of game.)
ok
say you make a complete jetway that is 3d. (no boxes with textures to make it look photo real ) this 3d jetway even have every single 3d wire that is visible from outside.to put it in a nutshell. say ... you want to make a door that is opened after the jetway is attached to aircraft .
simple procedure
make a polygon with with both sides or may be one side.
take a picture of a door
edit it for using as texture in slight simulator and
bingo
or make an object with 6 or 4 sides and the apply textures to it////
now at bottom rail , i.e bottom side is usually.......... wont be visible after doors are hinges to the jetway . So, it's no use texturing that size and uselessly add to the size of door.
1st method is more preferred .
2nd way is preferred by paywares to achieve quality but they sure such things are minimum in number after all they want their product return them some good earning. if only quality and not frame rate . then it's a junk
lets get back to the topic.
now making a complete 3d door with every thing that is really three dimensional. door handles, locks ,panels(if it has any) with every level difference i.e a portion of door is setback /portion of door protruding outsides.
ThIS Is the worst idea one would go for ..flight simulator scenery ..
you simulating aviation and not interiors or say architecture .
would'nt it be great to have these while maintaining the simulation performance to be in limits of smooth experience... usually yyou can simulate or fly with not much complain on frames and to enjoy simulation Ushould have frame ( iin the least) not below 24 . right ?
this is the worse limit and why go for it when you still can achieve more 30-40.
this will be like --FIRST CREATE A PROBLEM AND THEN SIT TRYING TO SOLVE THE PROBLEM this is the basic guideline for scenery development .n
NOW
when you put that Complete 3 DIMENSIONAL Jetway in flight simulator what happens?
from point of view of FLight Simulator we'll see what it has to do .to give results.
TOO many 3D objects . some are joined , some placed side by side , some are intersecting the other ,some overlapping , and they all have their own textures i.e door handle is steel, one pnel of door is translucent ,some part of panel is transparent ,( and if shadows are activated via setting) the as a complete model .....how does the physiography(study of shadow behaviour ) needs to be taken care . how does the physio fall , is it falling on some oother 3d objects or on the ground ,then scio also falls on a part ..portion of which is translucent... then the value of translucency /.....after passing the transclucent potion or object , shadow intensity is changed(increased).so that intensity needs to be worked .. to objects (complex 3d are say intersecting , and after intersection (collective)shape obtained then the further final physciography of the collective object .so oooooooooooooooo
many tedious woork required for the processor.....,..
what about simulation then //...

siimple thing is .........flight simulator has to work more with complex 3d objects and use its basic guidelines collectively work out the entire 3d objects.
but
for processor/flight simuator it is easy to work-out with basic simple shape and their individual characteristics including shadow
it knows very well and can easily process a simple box with simple or should i say simple shadow from the box.
the processor can do that very fast ///so concluding POLYGONS DEFINES SUCCESS.
it wants simple plain things so we do that
YOu want to make complicated door i tell what to do.
make a handle of steel and create a bgl file along with mdl file .
so their is translucent panel also so make a translucent panel and create bgl and mdl.
and similarly all variations of various objects individually
were is the 3d door ? patience my friend patience.
now since you are using.......say..........ez scenery...........then make a library
file i.e bgl using ez library manager . say 'DOOR is name of final Library BGLthat has these individual objects .
while makeing a library it will ask for mdl file, and you d have a bgl and mdl file for individual objects.so now door is the bgl that has components .
start flight simulator run ez scenery and construct a door while inside simulator. ON SITE using the said components ..i.e compose your door .....this is were pateince is tested
and when you restart your flight simulator .click "FLY now" RESU:LTS?
i gaurantee-= BIG WIDE OPEN MOUTH....you'd say "i m surely dreaming"
" no sir it ain't no dream,its right in front of you .VIRTUAL DOOR/JETWAY and frames? thats what result into " BIG WIDE OPEN MOUTH"
since the door was cn completed outside and placed at a location it is a headache for simulator. --level difference .intersections, overlap . trunslucent ,setbacks.protuding objeccts,material difference in one 3d object soooo
many things and flight simulator will treat it as oone complex object withlots of variations.
BUT BUT AND THE BIG BUT..
you composed the door while inside simulator and when you Assisgned its position/location it is a simple basic shape at a particular location (square/rectangle/cylinder/ etc )
and simulator knows how simple it is to deal with basic primary object.
it WILL NEVER WORK IT AS A COLLECTION (COMPLEX 3D)and deal with it as individual object which is damn easy to work,...SIMPLE OBJECT...SIMPLE PHYSIOGREAPHY ...SIngle MATERIAL ,SINGLE CHARACTERISTICS easy job for it does not require to work out intersection,overlaps,etc.
Please ignore any grammatical and spelling mistakes , instead use your brains
have an interesting day
Chao,
Ashish