• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Found an interesting Max Script - Regularizer

Messages
1,484
Hi gang, thought of you guys tonight. I downloaded a maxscript that does a nice job of predictably editing loops of edges....http://www.scriptspot.com/3ds-max/scripts/loop-regularizer

Just for fun, I applied it to the job of cutting airplane side windows...there was a thread around here somewhere recently, and the ideas there focused on boolean, or pro-boolean. This approach may offer some advantage (at least you maintain control over the topology).

Just drag and drop the script onto a viewport to install, and then restart max. The new tool will be found in the tools 2 section of the quad menu.

Here is a quick workflow for the attached pics....made a cylinder, convert to edit poly object. Select some edges or polys, use regularize from the quad menu, and poof.....then all I did was to inset the polys to create a control loop (did a minor clearnup..the inset action created a few unwanted tris). Then turbosmooth, shell, and voila.

setup_cyl_exp.jpg
cyl_exp.jpg
 
Max 9 and newer? Thanks! :-) I should point out that while the script makes a quick job of approximating windows, if you want an accurate replica you'll need to do some more work.
 
Last edited:
That's true, Tom. Can't take the challenge completely out, or development wouldn't be special! Over time, I've had more success avoiding boolean than using boolean, so I gravitate towards topology manipulation.
 
That's true, Tom. Can't take the challenge completely out, or development wouldn't be special! Over time, I've had more success avoiding boolean than using boolean, so I gravitate towards topology manipulation.

Hello Bob
Please, don't be afraid using booleans. All you need is a fresh start and little bit of preparation with this; specially if you have Proboolean available.
If you are not comfortable experimenting, perhaps this will:



Also, in his full tutorial series he explain in more depth the Regularizer script:

I hope this might help you overcome the initial resilience to use booleans.
All the best,
Sergio.
 
Hello lads

Although I do not want to hijack your post, here is another good script, the Clavertech:


It's also interesting and might be very useful in many situations.
Sergio.
 
Thanks Sergio for both posts...I will enjoy them. This thread is awesome with the various additions you guys are making...no hijacking concerns here.
 
don't be afraid using booleans

Sshhhhh! The Boolean Inquisition might hear you: nobody expects the Boolean Inquisition... :rotfl: :stirthepo

All the tools are worth learning. The better you get to know them, the better you know when, or not, to use them.
 
Last edited:
Sergio, go to your first video and you'll see the reason I prefer against boolean. From minute 6 to minute 9 of the first 9 minutes of the first vid, the presenter does nothing but fix the problems you get from boolean. His presentation stated in the beginning that he's using boolean to achieve precision in the shape, yet he then freely uses target weld to fix the boolean induced mess of the topology. So, in that, he then loses the precision he was seeking. Finding alternatives to boolean simply makes the topology never get screwed up in the first place.

I have no fear of boolean, and I've used boolean when I didn't understand there was alternatives, back in the days of FSDS and GMAX. It seemed like a magic wand when I first met that tool, after struggling to make objects using crude tools of the day (1995ish), like VOD. And I will always boolean when it gives me the fastest result to an all quad topology.

Think of it this way, this author needed to spend 3 minutes fixing his simple cylinder, it can be much worse with a real model.
 
From minute 6 to minute 9 of the first 9 minutes of the first vid, the presenter does nothing but fix the problems you get from boolean. His presentation stated in the beginning that he's using boolean to achieve precision in the shape, yet he then freely uses target weld to fix the boolean induced mess of the topology. So, in that, he then loses the precision he was seeking.

I think that's a little unfair, but I'd also like to know what other methods you'd use to create an accurate cutout in the cylinder of the Arrimus example? Paul mentions above the drawback of Regularizer in such a scenario, but I'd already worked that out. I'm always interested in learning more.

Sergio, the Clavertech script is a fine find!
 
Last edited:
well, I struggle with being accused of being unfair. My statement is accurate. The specific detail the man was making in the tut is nothing I've tried to model, nothing I care about, and for all I know boolean plus 3 min of cleanup and inaccuracies he created may still be the optimal workflow. I was just pointing out the that boolean creates new work to be needed, which is the reason I avoid it. Because I avoid it, I relish finding tools that assist.

I thought folks here would (and I think "have") appreciated the alert to the script, and I appreciated other's inputs with additional scripts and tuts.
 
Sshhhhh! The Boolean Inquisition might hear you: nobody expects the Boolean Inquisition... :rotfl: :stirthepo

All the tools are worth learning. The better you get to know them, the better you know when, or not, to use them.

LOL, I know my friend! ;)
 
Love the links to the tuts....not falling in love with boolean, but I love how this guy models.

That's it! You take whatever is better for your own needs and preferences. I agree that the instructor makes some radical adjustments when he use boolean operations. However, I do not remember when he tackle Pro booleans... and I think that really worth a try. ;)

In any event and as you wisely said, I am a fan of good topology and certainly there are many ways to skin a cat. I really hope you enjoy his other tutorials; with luck some will be handy in several situations.

Keep up the good work my friend.
All the best,
Sergio.
 
Paul, you need to use "face constraints" if you wish the hole to follow the base form.
Good point. I will have to try that. I wasn't trying to disparage your post, the tool is a good one and on my Max with hot keys assigned so I do use it.
 
Back
Top